Category: Eileen Hull

Santa’s Letter Box

3 Comments

Santa's Letter Box using Sizzix Slotted Box die

Create a Holiday Mailbox for letters to Santa using the Sizzix Slotted Treat Box Die by Eileen Hull*.

A fun project to make for Christmas!

Santa's Letter Box using Sizzix Slotted Box die by Eileen Hull.

To say I have a lot of Holiday Scrapbook paper would be a understatement!

Paper crafters have a tendency to “save” their special scrapbook paper

for just the right project.

We also have a tendency to hoard said special paper.

Santa's Letter Box using Sizzix Slotted Box die by Eileen Hull.

Sometimes its fun to use what you have on hand.

I dug deep into my hoarded Graphic 45 Christmas Scrapbook paper

to make the Santa Letter Box.

One of my favorite tips…

  • Before I die-cut the mat board, I like to use the Xyron Creative Station* to add adhesive to the back of the paper.  It gives the paper a complete layer of adhesive with no bubbles.  It really is easy to use.

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Santa's Letter Box

When making the Santa Letter Box…

  • I adapted the box by adding 1″ strips of matboard* around the existing box lid. The extra strips allowed the box to have a lip that fits over the edge of the box.

Santa's Letter Box

  • I added three additional layers of graduated sized matboard to the lid for dimension using foam tape.
  • I glued thrifted gold cording around each layer to cover the Foam Tape*.
  • A wood knob painted red completes the lid.

Santa's Letter Box

For the base of the letter box, I used an old metal lamp base. 

(At least, that’s what I think it is.)

We found it in my Dad’s garage while cleaning it out a few years ago.

It’s fun to use old things in unusual ways.

Santa's Letter Box

The Santa Letter Box adds a little Christmas Magic to your Holiday Decorating.  

Materials Used:  (*affiliate links)

Eileen Hull Educator Logo

Disclosure:  This is a sponsored post.  As a member of the Eileen Hull Educator Team, I have been provided product in exchange for my creative ideas.  The view and opinions are my own. 

“Autumn Leaves & Pumpkin Please” Album

Leave a comment

Autumn Leaves & Pumpkins Please Album

Autumn Leaves & Pumpkins Please

I love all the beautiful colors of Fall.

As the saying goes, Fall is my favorite color.

They make such a bright and cheery Fall album.

This simple album is the perfect place to add all your apple picking,

leaf peeping, trick-or-treating pictures this Fall.

The “Autumn Leaves & Pumpkins Please” album was made using

Eileen Hull’s Field Notes Journal Die by Sizzix*.

I used paper from Echo Parks “Fall Fever” Collection*.

Eileen Hull Educator Logo

Disclosure:  This is a sponsored post.  As a member of the Eileen Hull Educator Team, I have been provided product in exchange for my creative ideas.  The view and opinions are my own. 

Autumn Leaves & Pumpkins Please Album

Materials Used:  (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Autumn Leaves & Pumpkins Please Album

A few tidbits of information:

  • Before I die-cut the mat board, I like to use the Xyron Creative Station* to add adhesive to the back of the paper.  It gives the paper a complete layer of adhesive with no bubbles.  It really is easy to use.
  • The spine of the album comes with three sections.  I cut the first section off to make the album thinner.  It leaves two holes to add binding.
  • I wanted to try something different with how I added the pages to my album.  I inserted two mini book rings through the holes to hold my pages.
  • The mini book rings are approx. ¾” and with a little maneuvering they fit in the two side holes.
  • I used the cut off section to mark where I would need to punch the holes on my pages.

Autumn Leaves & Pumpkins Please Album

I wanted to make my album vertical instead of horizontal.

I love how versatile the Field Notes Die* is.

Autumn Leaves & Pumpkins Please Album

I created the word “autumn” using a Silhouette Cameo Electronic Die Cutting Machine*.

I cut it the letters out using StyleTechCraft Gold Chrome Vinyl*.

StyletechCraft products brought to you by ATSM Craft*

 

Make a Pumpkin Treat Box for your Favorite Trick or Treaters

Leave a comment

How to make a Pumpkin Treat Box

How to make a Pumpkin Gift Box

using the XL Card Caddy Die* from Sizzix and Eileen Hull.

It’s a fun little Halloween Treat Box for your favorite Trick or Treaters.

Eileen Hull Educator Logo

Disclosure:  This is a sponsored post.  As a member of the Eileen Hull Educator Team, I have been provided product in exchange for my creative ideas.  The view and opinions are my own. 

How to make a Pumpkin Gift Box

Materials Used:       (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to make a Pumpkin Gift Box using the XL Card Caddy Die from Sizzix and Eileen Hull.

Directions:

How to make a Pumpkin Gift Box using the XL Card Caddy Die from Sizzix and Eileen Hull.

StyletechCraft products brought to you by ATSM Craft*

How to make a Pumpkin Gift Box using the XL Card Caddy Die from Sizzix and Eileen Hull.

  • Adhere the sides to the card caddy base using Rapid Fuse Adhesive*.  The Die comes with scored side pieces that are perfect for putting the box together.  I wasn’t thinking and cut two pieces of matboard for my sides.  Both will work.  (the one that comes with the die would have been a lot easier)

How to make a Pumpkin Treat Box-Sue's Creative Workshop www.sueeldred.com 2459

  • Create a handle for the pumpkin treat box using wire and small wood beads.
  • Punch a hole on both sides of the box and attach the handle.

How to make a Shaker Tag

Leave a comment

How to make a Shaker Tag

Make a Shaker Tag using the Specimen Card

from the Eileen Hull New Field Notes Die from Sizzix.

Last month, we shared projects using Eileen’s New Chapter 3 release dies.

Today I thought I’d share a simple tutorial on how to make a Shaker Tag

using the Field Notes & Specimen Card Die*.

Eileen Hull Educator Logo

Disclosure:  This is a sponsored post.  As a member of the Eileen Hull Educator Team, I have been provided product in exchange for my creative ideas.  The view and opinions are my own. 

How to make a Shaker Tag

Materials Used to make the Shaker Tag:  (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to make a Shaker Tag

Directions:

  • I used the Life is Beautiful Collection Kit*.  It comes with beautiful papers, greetings, and stickers perfect for my tag.
  • Cut a 4″ x 5″ piece of scrapbook paper for the front of the tag.
  • For ease of assembly, I used the Xyron Creative Station* to add adhesive onto the back of the paper.  Place the paper in the machine, crank the handle to run the paper through.  As it goes through the machine it adds a complete layer of adhesive to the back of the paper.

How to make a Shaker Tag

  • Place the paper onto the Specimen Card* section of the die.  Sandwich the die between the cutting plates.  Crank the handle of the Big Shot Plus* to run it through to cut out the shape.

How to make a Shaker Tag

How to make a Shaker Tag

  • Place the paper for the inside of the tag onto the chipboard tag. Add adhesive to the small rectangle and place into the opening on the back.
  • Remove the protective coating from both sides of the small piece of acetate.
  • Remove the adhesive coating from the tag front. Place the acetate over the inside opening of the tag.
  • Remove the first protective coating from foam tag. Line up and place onto the tag front.
  • Place sequins in the small well the foam has created. Remove the second protective coating from the foam and place the back of the tag onto the foam.

How to make a Shaker Tag

  • Decorate the front of the tag using stickers from the collection kit.  Add 3D adhesive foam squares* to the back of the butterfly and watering can.
  • Tie a simple ribbon on the top of the tag.
  • Add the tag to a gift or bag for the perfect addition.

a little Pocket Full of Holiday Cheer

1 Comment

Mini Pocket of Cheer Christmas Ornament

How to make a Pocket Full of Holiday Cheer Christmas Ornament.

I’m Enveloping the Christmas in July Holiday Season with a Pocket Full of Holiday Cheer.

Mini Pocket of Cheer Christmas Ornament

Materials Used: (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Mini Pocket of Cheer Christmas Ornament

To make the Ornament:

  • Die cut two small envelopes using the Eileen Hull Envelope, Folder & Flowers Die Set* from Sizzix using red and green faux leather paper.  (you could also use scrapbook paper)
  • Cut the sides off the green envelope and glue it to the inside of the red envelope.  
  • Fold the envelope on the score lines and glue the bottom sides together.

Mini Pocket of Cheer Christmas Ornament

  • Punch two small holes on each side of the envelope flap.  Add a small piece of twine for hanging.
  • Hot glue small pieces of faux greenery and berries to the inside of the envelope. 
  • Place a small holiday greeting on the bottom of the envelope.  
  • Adhere a small holiday sticker to the greenery.  

Mini Pocket of Cheer Christmas Ornament

  • Add another Holiday Greeting Sticker to the back of the envelope.  I added 3D foam squares to the back of the sticker for added dimension.

Mini Pocket of Cheer Christmas Ornament

It is a quick and easy Holiday Ornament to add to the front of a package.

Or you could make several to hang on your Christmas Tree.  (you’ve got time)

Eileen Hull Educator Logo

Disclosure:  This is a sponsored post.  As a member of the Eileen Hull Educator Team, I have been provided product in exchange for my creative ideas.  The view and opinions are my own. 

Eileen Hull & Sizzix New Chapter 3 Release Party

3 Comments

Eileen Hull & Sizzix New Chapter 3 Release Dies

Join me and the Eileen Hull teams in sharing the

New Release Chapter 3 Dies from Sizzix and Eileen Hull.

This is a fun new collection that I think you will enjoy.

And the samples from the entire team are phenomenal.

New Chapter 3 Dies from Sizzix and Eileen Hull

First off is my vintage style Treasure Box.  

I used the Slotted Treat Box Die* to make my Treasure Box. I adapted the box by adding a 1″ strip of matboard* around the existing box lid. The extra strips allowed the box to have a lip that fits over the edge of the box.

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

New Chapter 3 Dies from Sizzix and Eileen Hull

The Bigz Plus Slotted Treat Box Die* measures 6 1/2” x 5” x 3 1/2” and can hold so many things- a set of cards, journals, doll clothes, ephemera storage or you can even use it as a gift box! This is a Scoreboards die which is specially designed to cut and score thick material like matboard, chipboard, leather, felt, fabric and metal. *A 9” wide machine is required to cut this die.

Eileen Hull Educator Logo

Disclosure:  This is a sponsored post.  As a member of the Eileen Hull Educator Team, I have been provided product in exchange for my creative ideas.  The view and opinions are my own. 

New Chapter 3 Dies from Sizzix and Eileen Hull

Sizzix-3D Textured Impressions-Keys Embossing Folder*

I rarely make masculine cards.  They’re a little bit of a challenge for me.  I loved using the key’s embossing folder for this card.  The key details are perfect.  I made them pop by adding Luster Wax over the raised design.  I used a combination of Ivory and Charcoal Luster Wax.

When we finished cleaning out my dad’s house, I came home with a huge ring of old keys.  I guess I’m not the only one.  Eileen shared that the Keys 3D Embossing Folder* is special to her because they all came from her dad’s house.

New Chapter 3 Dies from Sizzix and Eileen Hull

The Floral Album was made using Eileen’s New Field Notes and Specimen Card Die* and paper from 49 and Market’s Rouge Collection*.  The spine was covered using some of my hoarded faux leather paper.

The Field Notes and Specimen Card Die* is a Bigz XL die that holds 5” x 7” pages or photos- a new orientation! The Specimen Card may be used to hold photos, as a journaling card or a shaker. Holes are pre-cut into the book spine which is adjustable from 1/2” to 1 1/2 in width. *XL Cutting Pads will be needed to cut the book cover.

New Chapter 3 Dies from Sizzix and Eileen Hull

I used the Specimen Card from Eileen’s Field Notes Journal* along with the Sizzix Thinlets Envelope, Folder & Flowers Die Set* to create the embellishment on the inside front pocket of the album.  The inside pages of the album were decorated using Rub-Ons Transfers from the 49 and Market Rouge Collection*.

New Chapter 3 Dies from Sizzix and Eileen Hull

The Sizzix Thinlets Envelope, Folder & Flowers Die Set* is made up of nine dies- an adorable mini envelope, file folder, set of small, medium and large hearts, and a large and small flower and leaf set. This die set will be perfect to create ephemera using your scraps!

New Chapter 3 Dies from Sizzix and Eileen Hull

It’s a Good Day to Have a Good Day!

The Shaker Tag was made using Specimen Card from Eileen’s Field Notes Journal* foam strips, sequins, and paper from Echo Park’s Life is Beautiful Collection Kit*.

New Chapter 3 Dies from Sizzix and Eileen Hull

This a Sneak Peak of just a few of the amazing projects that the team has made.  

For more information click on the picture below.  ↓

New Chapter 3 Dies from Sizzix and Eileen Hull

Join us for our Chapter 3 Release Party on Tuesday, July 11 at 12:00 pm ET!

It will be streamed on Eileen Hull Designs on Facebook and Eileen’s YouTube channel. Meet the team and see their fantastic makes using these dies and make sure to follow our blog hop. We have prizes! Just comment in the Release Party chat and let us know which is your new favorite die or folder and what you would make with it and be eligible to win something from this collection!

Here’s the list of participating designers:

Jennie Atkinson
Sarah Lizzie
Lisa Hoel
Jenny Marples
Maggi Harding
Karen Bearse
Elizabeth Robinson
Susie Bentz
Teresita Arvelo
Cheryl Bodkin-Waters
Tonya Trantham
Sue Eldred  (that’s me)

DIY Floral Notepad Holder

Leave a comment

DIY Floral Notepad Holder

Create a Handy Floral Notepad Holder using Sizzix Dies by Eileen Hull.

I am a list maker!

I usually have several lists going at one time.

And, if the list gets too messy, I’ll create a new one.

Lists are my way of keeping me organized.

Post-it notes* are another favorite of mine.

This Floral Notepad Holder is a great place to put my Post-it notes.

DIY Floral Notepad Holder

The theme for this month’s Eileen Hull Teams is Die Cut Mania.

The best part about Eileen’s dies is you can mix them with other Eileen dies to create one great project.

Eileen Hull Educator Logo

Disclosure:  This is a sponsored post.  As a member of the Eileen Hull Educator Team, I have been provided product in exchange for my creative ideas.  The view and opinions are my own. 

DIY Floral Notepad Holder using Eileen Hull & Sizzix Dies.

Materials Used:  (*affiliate links)

Directions: 

  • I used a piece of white mat board* as the base to create the pieces for the Notepad Holder. To adhere the paper to the mat board, I like to run the decorative paper through the Xyron Creative Station* to add a complete adhesive to the back. It makes everything lay wonderfully smooth with no peeling up corners.
  • Die Cut the pieces for the stand using the Phone Stand Die* for the base, Frame Pocket Journal Die* for the pocket, and the Journal Die* for the decorative plaque. (as shown in the picture above)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

DIY Floral Notepad Holder using Eileen Hull & Sizzix Dies.

  • Gently fold the die-cut pieces on their scorelines.
  • Adhere the pieces together using a strong adhesive. My favorite for adhering mat board is Dap Liquid Adhesive*.  All you need to do is hold the glued piece in place for 30 seconds, and it stays secure.

DIY Floral Notepad Holder using Eileen Hull & Sizzix Dies.

  • To add a decorative element to the edge of the center plaque, use the flat end of a gold calligraphy pen* to add a gold edging.  (It may take a little practice to make your lines smooth.)

DIY Floral Notepad Holder using Eileen Hull & Sizzix Dies.

  • Cut the letters “NOTES” for the front of the pocket using the Alpha Numeric Die* and StyleTechCraft Gold Craft Vinyl*.
  • Want a matching gold pen for the notepad holder? Measure the length of the barrel. Cut the vinyl 1 1/4″ wide. Carefully adhere the gold vinyl to the barrel. It adds personality to a simple everyday pen.

DIY Floral Notepad Holder

  •  Place the letters on the back of a small piece of gridded transfer tape* to line them up straight.
  • Place the transfer paper onto the small plaque and rub over the transfer paper to transfer the letters.

StyletechCraft products brought to you by ATSM Craft*

DIY Floral Notepad Holder

  • Add a decorative strip of coordinating paper onto the front of the pocket and adhere the floral plaque using Rapid Fuse Adhesive*.

DIY Floral Notepad Holder

The Floral Notepad Holder looks great on my desk and now I’m even more organized.

Amazon prime

Sizzix 70% Mega Spring Clearance Sale

Leave a comment

Sizzix 70% Mega Spring Clearance Sale

You know me, I have to share a good deal when I see one.

Sizzix is having their Spring Mega Sale with up to 70% off dies,

including several of my favorite Eileen Hull Dies.

(Consider it an early Mother’s Day present to yourself.)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Life is Beautiful Mini Card & Envelope Stationery Caddy

Leave a comment

Mini Card and Envelope Stationery Caddy

The Life is Beautiful Mini Card & Envelope Stationery Caddy

is a great gift idea for anyone who loves to send cards.

It would also make a sweet and thoughtful Mother’s Day Gift Idea.

Echo Park's Life is Beautiful Collection Kit.

I used the “Life is Beautiful” Collection Kit from Echo Park*.

I also used a few Eileen Hull dies by Sizzix to make the caddy.

Eileen Hull Educator Logo

Disclosure:  This is a sponsored post.  As a member of the Eileen Hull Educator Team, I have been provided product in exchange for my creative ideas.  The view and opinions are my own. 

Materials Used:    (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Mini Card and Envelope Stationery Caddy

Directions:

  • For the base of the stationery caddy, cut two coordinating 6″ x 10½” pieces of scrapbook paper. (One is for the front, and one is for the inside.)
  • Cut a 6″ x 10½” piece of Sizzix Mat Board*.
  • Place the paper design side up into the Xyron Creative Station*. Crank the handle to run the paper through the machine. As the paper runs through the Xyron Creative Station*, it adds a complete layer of adhesive to the backside of the paper.
  • Adhere the paper onto the front and back of the Mat Board*.

Mini Card and Envelope Stationery Caddy

  • Place the mat board with the outside design face down on the Card Caddy Die*.
  • Sandwich the die between the two cutting places and run the die through the Big Shot Die-Cutting Machine*.
  • Die-cut the two caddy sides using mat board and paper.
  • Gently fold the caddy base along the outer score lines and glue the caddy sides to the caddy base using Rapid Fuse Adhesive*.

Life is Beautiful Mini Card and Envelope Stationery Caddy

Life is Beautiful Journaling Cards by Echo Park

Mini Card and Envelope Stationery Caddy

  • I trimmed and layered the Journaling Cards* onto cardstock to create mini cards to fit into the envelopes.
  • The finished cards are 3¼” x 4¼”.

Life is Beautiful Sticker Sheet from Echo Park

Mini Card and Envelope Stationery Caddy

  • I added a piece of 1″ pink grosgrain ribbon around the middle of the caddy case.
  • I cut apart the Life is Beautiful 4″ x 4″ journal cards* and adhered the “basket card” onto the matboard for sturdiness. I trimmed the matboard to 3½” x 3½” and adhered it to the front of the caddy.
  • I added stickers to the front of the caddy and popped them up with foam squares for added dimension.
  • To complete the caddy, add a fun set of colorful pens and a coordinating faux flower stem.

Purchase scrapbooking supplies from Scrapbook.com!

Spring Paper Crafting with Sizzix and Eileen Hull

2 Comments

New Chapter 2 New Release Dies by Sizzix and Eileen Hull

Today, I’m excited to share several Paper Crafting Projects using the New Eileen Hull Dies

by Sizzix.  This is another fun collection with so many possibilities.

Our Life Our Story Folio Album

Our Life Story Mini Album 

My first project is a Mini Album made with Eileen’s New Card Case Die by Sizzix*.

I love creating an album with dimension and a lot of moving parts.

I used the sweet Botanical Garden Paper Collection from Carta Bella*.

Eileen Hull Educator Logo

Disclosure:  This is a sponsored post.  As a member of the Eileen Hull Educator Team, I have been provided product in exchange for my creative ideas.  The view and opinions are my own. 

Our Life Our Story Folio Album

Materials Used:  (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Our Life Our Story Folio Album made with the Sizzix Card Album Die by Eileen Hull.

It is a fun little album with sturdy chipboard pockets perfect for inserting small notebooks or cards.

Congrats Patchwork Slimline Card

The Congrats Quilt Card was made with Eileen’s New Mini Slimline & Tickets Die*.

The Mini Slimline & Tickets Die* comes with four coordinating thin metal dies.

For the card, I die-cut the base using cream cardstock.

I then cut small squares to fit inside the tickets using the Flora No. 5 Paper Collection from Carta Bella*.

I embellished the front of the card with stickers mounted up with 3D adhesive foam squares*.

Mini Slimline Ticket Bookmark

Bloom Laminated Bookmark

The Slimline & Tickets Die Set* comes with one die that is a thin strip of tickets.

I used that to make a simple bookmark.

I laminated the bookmark using a Xyron Creative Station Mini* with a Laminate Cartridge*.

Congrats Patchwork Slimline Card

Materials Used:  (*affiliate links)

Happy Together Envelope Book

Happy Together Envelope Mini Album

Another one of Eileen’s New Dies is the New Journaling Card, Envelope & Window Die*.

I used the Envelope Die with Eileen’s Folio Journal Die* to create a Mini Album.

Did you know you can cut down the albums after they’ve been die-cut from the mat board

to adapt the album?  I revised the Folio Journal* for the perfect fit.

Happy Together Envelope Book

I created an accordion fold for the inside of the spine to hold all the envelopes in place.

I used Rapid Fuse Adhesive* to hold the accordion fold securely in place.

Gather at Home 6 x 6 Paper Pad by Carta Bella Paper Company

Materials Used:  (*affiliate links)

Happy Together Envelope Book

For the pages of the album, I created six small envelopes.  (Four shown)

I decorated each envelope with coordinating paper and stickers.

I added a small piece of Velcro under the flap to keep it closed.

Happy Together Envelope Book

I adhered the envelopes onto the accordion flaps using Rapid Fuse Adhesive*.

After I finished the album, I decided to add a small button closure

to the front and back of the album. (not shown)

Eileen Hull Sizzix Chapter 2 New Release Dies

Click on picture for more inspiration and Blog Hop Information.

LIST OF HOP STOPS:

Eileen Hull Designs 
Pam Bray
Jennie Atkinson
Sarah Lizzie
Lisa Hoel
Susie Bentz
Tonya Trantham
Jenny Marples
Maggi Harding
Karen Bearse
Sue Eldred  (you are here)
Sharon Curtis
Teresita Arvelo
Madeline Arendt
Cheryl Bodkin-Waters