It all started with an inexpensive gold mirror that my daughter didn’t want anymore.
I had spray painted it red and left it like that for a couple of years. (it was o.k.)
I took it off the shelf, while cleaning the other day, and decided it needed an immediate update.
Of course, I had to stop cleaning. (when inspiration strikes)
This is how I etched my mirror… (*affiliate links)
- I removed the mirror from the frame. I gave the red frame a light sanding and then painted it with Tattered Angels Decor and DIY Paint, Ebony*.
- I cut an oval mask using etchall etchmask* vinyl and centered it on the mirror. Make sure to burnish the vinyl to get out air bubbles and to make sure the all edges all down.
- Apply a thick coat of etchall Etching Crème* over the sides of the mirror using the squeegee. It’s important to get an even coat of etching crème to achieve a consistent even etch. (remember more is better)
- Wait 15 minutes. Scrape excess etching crème from the mirror and return the extra etching crème back into the bottle. (it’s reusable)
- Rinse mirror with warm water to clean.
- Remove mask and dry.
- Return the mirror back into the frame. Apply the gold “love” rub-on onto the mirror.
New to Etching? You might want to check out the video on the Etchall getting started page.
The Etched Mirror project was created for and sponsored by Etchall®.
*Disclosure: This blog uses ads and affiliate links. If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog. Thanks for your support!