Category: Holidays

DIY Porcelain Snowman Ornament

Leave a comment

DIY Porcelain Snowman Ornament

How to make a Porcelain Snowman Ornament using StyleTechCraft Vinyl.

I picked up this round porcelain ornament blank sometime early in the year at Dollar Tree.

I knew it would make a cute Christmas ornament for this year’s Christmas tree.

All it needed was a little StyleTechCraft Craft Vinyl* and a cute snowman design.

“This is a sponsored post.  As a member of the StyleTechCraft Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

DIY Porcelain Snowman Ornament

Materials Used:  (*affiliate links)

StyletechCraft products brought to you by ATSM Craft*

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

DIY Porcelain Snowman Ornament

DIY Porcelain Snowman Ornament

  • Because I needed to work around the top holes of the ornament, I cut the outline from the snowman.   I carefully placed it on the ornament first to make sure it fit.

DIY Porcelain Snowman Ornament

  • I used Transfer Tape* to add the snowman design to the ornament.
  • Place the Transfer Tape* over the vinyl.  Rub gently over the vinyl using a vinyl scraper tool.

DIY Porcelain Snowman Ornament

  • Remove the transfer paper from the white paper backing and place it on the ornament.  The clear transfer tape makes it easy to line up your design.

DIY Porcelain Snowman Ornament

All you need to do to finish up the ornament is to add ribbon for hanging and put it on your tree.

Fall Jenga Block Projects with Xyron

Leave a comment

Fall Jenga Block Projects with Xyron

How to make Fall Jenga Block Projects with Xyron.

These projects are Quick and Easy and are a great way to use up small scraps of paper.

Fall Jenga Block Projects with Xyron

Xyron Logo

 This is a sponsored post for Xyron.  I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Fall Jenga Block Projects with Xyron

How to make a Jenga Block Pumpkin

Materials Used:    (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Fall Jenga Block Projects with Xyron

Directions:

  • Paint three Jenga Blocks* with orange acrylic paint.
  • Paint the small wood cube with brown acrylic paint
  • Cut six strips of fall scrapbook paper ¾” x 3”.
  • Place the strips of paper, design side up, into the Xyron Create a Sticker Mini*. Crank the handle to run the strips of paper through the Create a Sticker Mini. As the paper strips go through the Xyron Create a Sticker Mini*, it adds a complete layer of adhesive onto the back.

Fall Jenga Block Projects with Xyron

  • Place the strips of paper onto the front and back of the Jenga Blocks*.

Fall Jenga Block Projects with Xyron

Fall Jenga Block Projects with Xyron

  • Glue the small wood cube and the leaves to the top of the pumpkin.
  • Tie a small twine bow and glue it to the front of the pumpkin.
  • Adhere the word Thankful onto a small layer using the Xyron Mega Runner* and attach it to the front of the pumpkin.

Fall Jenga Block Projects with Xyron

The Jenga Block Pumpkin is a great way to use small scraps of your favorite Fall scrapbook paper.

Fall Jenga Block Projects with Xyron

Another simple Fall project is the Jenga Block Frame.

Fall Jenga Block Projects with Xyron

Directions:

  • Paint six Jenga Blocks* with brown acrylic paint.
  • Cut 12 strips of fall scrapbook paper ¾” x 3”.
  • Place the strips of paper, design side up, into the Xyron Create a Sticker Mini*. Crank the handle to run the strips of paper through the Create a Sticker Mini. As the paper strips go through the Xyron Create a Sticker Mini*, it adds a complete layer of adhesive onto the back.
  • Place the strips of paper onto the front and back of the Jenga Blocks*.
  • Hot Glue the blocks together to form a frame.
  • Adhere greeting or photo to the back of the frame.
  • Embellish the frame by gluing on a small fall flower and leaves*.

For a truly inexpensive Fall Craft, you can pick up the wood blocks at Dollar Tree.

Halloween Shaker Jar Tags

Leave a comment

How to make a Halloween Shaker Tag

How to Create Halloween Shaker Jar Tags.

A fun Halloween treat for kids of all ages.

How to make a Halloween Shaker Tag

I just received these cute Mason Jar Shaker Dies from The Maker’s Movement,

and of course, I had to hurry up and make a few Halloween Jar Shaker Tags.

These are also going to make super cute Christmas Shaker tags.  (I can’t wait!)

Maker's Movement

Disclosure:  This is a sponsored post for The Maker’s Movement*.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own. 

How to make a Halloween Shaker Tag using the Shaker Jar Tag

Materials Used:  (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to make a Halloween Shaker Tag

  • You will need Halloween paper from the Tricks or Treats paper pad, acetate, and craft foam.

How to make a Halloween Shaker Tag

  • Die Cut the pieces using the Mini Maker Die Cut Machine as shown.

How to make a Halloween Shaker Tag

A Tip for Easy Assembly…

  •  Place the striped paper, used for the top of the mason jar shaker tag, into the Xyron Create a Sticker Mini*. Crank the handle to run the paper through the machine. As it goes through the Xyron Create a Sticker Mini* it adds a layer of adhesive onto the back of the paper. Die-cut the paper using the Mason Jar Frame Die. Now the die-cut frame is a sticker, which makes placing it onto the acetate easy. 

How to make a Halloween Shaker Tag

  • Remove the blue protective liner from the acetate.  Place the mason jar frame onto the acetate.
  • Remove one side of the protective liner from the craft foam frame.  Place the foam frame onto the mason jar silhouette.
  • Add Halloween Shaker Sprinkles in the center of the foam.  Don’t overfill.  You want to make sure to leave for shaking.
  • Remove the liner from the craft foam and line up the mason jar frame (with acetate) over the
  • Die Cut two jar tops and adhere them to the top of the shaker jar.
  • Wrap with twine.  Glue the Halloween ribbon around the base of the shaker jar.

How to make a Halloween Shaker Tag

Tie the Halloween Shaker Tag onto a mason jar filled with Halloween Treats.

A Fun Halloween Treat.

Comfort & Joy Holiday Kickoff

Leave a comment

Eileen Hull Comfort & Joy Kick Off

I wanted to share a little bit about a fun event that I’m participating in.  

The Comfort & Joy Kickoff

We are starting the 2022 holiday season with the 2022 Comfort & Joy Kickoff Event an all-day workshop put on by Eileen and team!  You will learn tips, tricks, and techniques for working with Eileen’s products and how they may be used throughout the holiday season.

Join us for our third annual Comfort & Joy holiday craft celebration to create journals, holiday packaging and containers, cards, small gifts, ornaments and so much more!

The first Comfort & Joy event began in 2020.  During the pandemic, we were all at loose ends, missing the holiday celebrations normally enjoyed with family and friends.  We became each other’s family and celebrated together in our small group.  The team put their thinking caps on and created two weeks of content and we all crafted it together!  I personally was very grateful for the Fan Club community that year.

In that spirit, we continue this event… The Comfort & Joy Kickoff Event will be held on Saturday, November 5 beginning at 9:30 Eastern Time and ending at about 4:00.  There will be a little break for lunch.

The event will be hosted in a private Facebook group. Once you pay for the event, you will receive a PDF so check your mail and spam folder!  You will be directed to the Facebook group where the event will take place.

On the day of the event, attendees will gather in the group at 9:30 AM Eastern time to watch the first live. Eileen will start the event off and every 45 minutes, a new team member will be introduced with a tutorial, technique, or project.  Craft along live if you’d like or catch up later on replay- whatever works for you!  There will be a total of 8 classes plus bonus projects.

This is a steal at $20 for the whole day! 

We wanted the event to be affordable to everyone who wants to attend. The team will be sharing the proceeds.  This is a nice way to thank them for the time they put in all year creating ideas to inspire you!

And the Comfort and Joy event doesn’t end there! Following the Kickoff event, the party continues in the Eileen Hull Fan Club Facebook group! https://www.facebook.com/groups/EileenHullFanClub

From Nov. 7- 18, there will be additional content provided each weekday for free. 

You are invited to join us if you are not already a member- we are very friendly and share a wonderfully creative community. Don’t forget to answer the questions- they are required for admission

Join the Eileen Hull Fan Club Facebook group for the creative community, support, and fun. 

Faux Stone Geometric Box

1 Comment

Faux Stone Geometric Box

Add a little dimension to your paper crafting projects this Holiday Season.

The Faux Stone Geometric Box was made with Eileen Hull New Geometric Box Die by Sizzix*,

Sizzix Matboard* and Deco Arts Dimensional Effects Texture Paste*.

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

666046 Sizzix Geometric Box Die by Eileen Hull

How to make a Faux Stone Geometric Box:

  • The Geometric Box Die goes together really easily and is also expandable.
  • Die-cut the box* using mat board* and a Big Shot Die-Cutting Machine*. 
  • You will need to cut two pieces of the middle section of the box.  
  • Carefully fold the box on the score lines.
  • Assemble the box with the tabs on each side of the box. I like to use Rapid Fuse Adhesive* to glue the box. It dries and holds in 30 seconds.

DIY Faux Stone Geometric Box

How to make a Faux Stone Geometric Box

  • Use dark gray acrylic paint to paint the entire box. (inside and out)
  • Use a dry brush with a small amount of paint to apply lighter coats of paint over the outside of the box. I painted from dark to light. I used a combination of the dry brush technique with stippling to get my desired look.

How to make a Faux Stone Geometric Box

  • For my Holiday Embellishment, I used a 1″ gold pendant blank for jewelry making and a 1″ plaid scrapbook paper circle glued in the center.
  • Tie the gold pendant around the top of the box using a piece of braided twine.

How to make a Faux Stone Geometric Box.

Add a small faux Christmas Tree for a sophisticated Holiday Decoration.

Eileen Hull Educator Logo

Disclosure:  This is a sponsored post.  As a member of the Eileen Hull Educator Team, I have been provided product in exchange for my creative ideas.  The view and opinions are my own. 

Amazon Fall Rug Event

Materials Used:    (*affiliate links)

Eileen Hull/Sizzix Chapter 4 Release Party

2 Comments

Eileen Hull Sizzix Chapter 4 Release Party

New Chapter 4 Dies by Eileen Hull and Sizzix

The Eileen Hull teams are having a New Release Blog Hop

using the New Eileen Hull/Sizzix Chapter 4 Dies.

Faux Stone Geometric Box

Looking to add a little dimension to your paper crafting projects?

The Faux Stone Geometric Box was made with Eileen Hull’s new

Eileen Hull Geometric Box Die by Sizzix*, Sizzix Matboard*

and Deco Arts Dimensional Effects Texture Paste*.

See the full tutorial here for the Faux Stone Geometric Box.

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to make a dimensional Sunflower-Sue's Creative Workshop www.sueeldred.com 6165

The Simple Country Sunflower…

was made using Eileen Hull Large Sunflower Die by Sizzix*,

acrylic paint, and mod podge*.

I will share tutorials on each project on my blog later in the week.  

Eileen Hull and Sizzix Chapter 4 Release Party

Check out the Eileen Hull’s Blog for the Blog Hop and even more ideas. 

Eileen Hull Sizzix Release Blog Hop:

Pam Bray
Jennie Atkinson
Sarah Lizzie
Lisa Hoel
Sharon Curtis
Tonya Trantham
Elizabeth Robinson
Jenny Marples
Maggi Harding
Sue Eldred  (you are here)
Karen Bearse

Eileen Hull Educator Logo

Disclosure:  This is a sponsored post.  As a member of the Eileen Hull Educator Team, I have been provided product in exchange for my creative ideas.  The view and opinions are my own. 

Sizzix Craft Box

Three Projects with Eileen Hull’s New Chapter 3 Release

6 Comments

Projects using Eileen Hull's New Chapter 3 Dies from Sizzix

Eileen Hull’s New Chapter 3 Dies from Sizzix.

I am excited to share three projects I created using Eileen Hull’s New Chapter 3 Sizzix

die collection!

They are a fun group of dies.

Each piece in the set stands alone but also coordinates with the others

to make a truly versatile and valuable addition to your collection.

Back to School Gift Box

Back to School Teacher Gift Box

If you’re looking for to “butter up” the new teacher, this BTS gift box is a fun project to make.

The Back-to-School Teacher Gift Box uses Eileen’s New XL Card Box Die*.

I LOVE this Die* and I can’t wait to share all the ideas I have for this die for the Holidays.

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Puppy Love Skinny Mini Album-Sue's Creative Workshop www.sueeldred.com 4902

Puppy Love Skinny Mini Album

Eileen’s Skinny Mini Book Box Die* makes the perfect sized album for pictures

of my pup Dexter.

The die also comes with the side parts to make it into a box.  (genius!)

Puppy Love Skinny Mini Album

I created accordion pages for the inside of the album by scoring and attaching 6″ x 12″ cardstock.

Skinny Mini Elements Christmas Poinsettia Card.

Skinny Mini Elements Christmas Poinsettia Card

While the Skinny Mini Elements Die* is not a Christmas Die,

it sure makes one cute Christmas card.

It coordinates perfectly with the Skinny Mini Book Box Die*.

Sizzix Skinny Mini Elements Christmas Poinsettia Card-Sue's Creative Workshop www.sueeldred.com 4940

This card comes with a little back story.

After I made this card, I sent Eileen a picture of the finished project.

She messaged me back that I was brilliant for making the poinsettias using the cut-outs

from the die.  I agreed that “would have” been brilliant, but (darn it) I had used premade

paper poinsettias for the card.

Up for the challenge, I remade the red poinsettia using the cut-outs from the die.

I left the white poinsettias for comparison.  (and laziness)

I cut the points off the side and arranged the petals on foam mounting squares.

Voila, a poinsettia!

Eileen Hull Chapter 3 Release Party

Check out the Eileen Hull’s Blog below for even more ideas. 

Here’s the list of Chapter #3 Blog Hop Stops:

Eileen Hull Educator Logo

Disclosure:  This is a sponsored post.  As a member of the Eileen Hull Educator Team, I have been provided product in exchange for my creative ideas.  The view and opinions are my own. 

Patriotic Banner for the 4th of July

1 Comment

Patriotic Banner for the 4th of July

A Patriotic Red White and Blue Banner for your next 4th of July Get Together.

Is the Family getting together for the 4th?

Get the party started with a simple 4th of July Banner using StyleTechCraft Red and White

Glitter Vinyl, Navy Cardstock, and a Silhouette Cameo Electronic Die Cutting Machine*.

“This is a sponsored post.  As a member of the StyleTechCraft Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Patriotic Banner for the 4th of July

Materials Used:

StyletechCraft products brought to you by ATSM Craft*

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Patriotic Banner for the 4th of July

Patriotic Banner for the 4th of July

  • Use a hole punch to add holes in the top of the banner pieces.
  • Thread the banner pieces and plain wood beads* onto a piece of twine.

Patriotic Banner for the 4th of July

Patriotic Banner for the 4th of July

Set out the chairs and fire up the grill, and you’re on your way to a great 4th of July Celebration.

A Mother’s Day Plate for Mom.

1 Comment

A Mother's Day Plate for Mom

A quick and easy Mother’s Day project with StyleTechCraft Adhesive Vinyl.

Remember when we were in grade school, and we painted clay pots for Mother’s Day?

Mom always said the best gifts were from the heart.

So, this year, show Mom just how much you love her with an upgraded handmade gift.

Quick and Easy Mother's Day Plate for Mom-Sue's Creative Workshop www.sueeldred.com 3181

This project can be made by anyone with an electronic die-cutting machine.  

I picked up the red plate at Dollar Tree* to match my kitchen.  (This one’s for me.)

With the vinyl supplies that I already had on hand, I’ve invested $1.25 so far.

Here’s what I used: 

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Mother's Day Plate for Mom

  • To begin, wipe the surface of the plate with the alcohol to remove any oils.

Mother's Day Plate for Mom

StyletechCraft products brought to you by ATSM Craft*

Mother's Day Plate for Mom

Check out this New Weeding Tool From StyleTechCraft*.

It looks like a retractable pencil, but with a nice pointy end.

It is so easy to use.  A real game changer when it comes to weeding vinyl.

Mother's Day Plate for Mom

  • Lay the transfer paper over the vinyl image.
  • Rub over the transfer paper with a vinyl scraper tool.
  • Remove vinyl from the white backing.

Mother's Day Plate for Mom

  • Use StyleTechCraft Vinyl Transfer Tape* to adhere the vinyl onto the front of the plate.
  • Gently rub the transfer paper and remove it from the plate.
  • It is best to Hand Wash Plate Only.

Mother's Day Plate for Mom

A last minute, quick and easy Mother’s Day Plate for Mom.

If you’re that overachiever kid, you can add a plate hanger or stand.

“This is a sponsored post.  As a member of the StyleTechCraft Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

My Lucky Mug

Leave a comment

My Lucky Mug

Everyone’s Irish on St. Patrick’s Day.

Whether you’re toasting with green beer or a minty green shake,

Make St. Patrick’s Day a little more special with StyleTechCraft vinyl.

My Lucky Mug made with StyleTechCraft Vinyl.

I love ♥ adding vinyl to everyday items.

I found these clear mason jar mugs at Dollar Tree* and decided to pick up a

few to create a little St. Patrick’s Day fun.

Did you know, Dollar Tree* is the perfect place for finding

inexpensive glassware to make any occasion special?

Buy Your Crafting Supplies Now at The Dollar Tree!

My Lucky Mug made with StyleTechCraft Vinyl.

Materials Used:     (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

To create my Lucky Mug…

I used a cute “Lucky Rainbow” image from the Silhouette Store

and a variety of StyleTechCraft vinyl and cut it using my

Silhouette Cameo Electronic Die Cutting Machine*.My Lucky Mug made with StyleTechCraft Vinyl.

Happy St. Patrick’s Day!