Holiday Joy Gift Card/Money Holder

Holiday Joy Gift Card Money Holder

The Holiday Joy Gift Card/Money Holder is great for sticking a little money

or a Starbucks gift card.  Who wouldn’t love getting that for Christmas?

The card uses the Coffee Die Set from The Maker’s Movement.

The sleeve around the coffee cup uses the NEW Eileen Hull Sweater Embossing Plate*.

Coffee Die Set from The Maker's Movement    Maker's Movement Alphabet Die Set

Materials Used:

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Holiday Joy Gift Card Money Holder

Directions:

  • The tri-fold card was made from a 5 ½” x 9 ¾” piece of Kraft Cardstock. I scored the cardstock on the 3 ¼” and 6 ½” mark.
  • Adhere the green plaid layer to the gold cardstock layer. Adhere onto the front of the tri-fold card.
  • Assemble and adhere the die-cut pieces of the coffee cup onto the front of the card. The red plaid pieces and vellum coffee lid have been made into stickers using a Xyron Creative Station.  The “coffee sleeve” was embossed using the sweater embossing folder.
  • Remove the backing off the gridded transfer paper. Apply the transfer paper over the word “Holiday”.  Gently rub over the transfer paper to make sure the word has transferred.  Apply onto the top of the card.
  • Add clear adhesive enamel dots to the lid of the coffee cup.
  • The transfer paper is reusable. Use the transfer paper to apply the small snowflake onto the cup.
  • On the inside of the card… Open the trifold card. Adhere the thin red plaid adhesive strip to the top of the cream cardstock layer.  (Leave a 1/8” margin on the top) Trim the excess paper strip.  Using the transfer paper, transfer the word “Enjoy” under the red strip.
  • On the third-panel measure and mark 1 ½” on the outside edge of the panel. On the inside fold of the third panel, measure and mark 2 ½”.  Draw a line from the 2 ½” mark to the 1 ½” mark.  Cut along the line and the inside fold to create a diagonal pocket flap.  Adhere the thin green strip to the top of the diagonal panel and trim excess.
  • Punch a small hole in the center of the green panel and attach the small cream tag with twine. Apply the small red plaid heart to the center of the tag.
  • Add adhesive to the bottom and side of the flap. Adhere flap to the center panel.

Maker's Movement

Disclosure:  This is a sponsored post for The Maker’s Movement.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own. 

Mini Donut Box Gift Card Holder

How to Make a Mini Donut Box Gift Card Holder.

How to Make a Sweet Mini Donut Box Gift Card Holder

using the Donut Box Die Set from The Maker’s Movement.

The perfect gift card/money holder for that special someone with a sweet tooth.

Maker's Movement

Disclosure:  This is a sponsored post  for the Maker’s Movement.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own.   

How to Make a Mini Donut Box Gift Card Holder.

Materials Used:             (*affiliate links)

Shop Tombow

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!
Mini Donut Box Gift Box Holder

Directions:

  • Cut the Donut Box using the Crossover II Die-Cut Machine and the Donut Box Die Set.
  • Cut two scalloped rectangles using the Donut Box Die Set.  I like to run the paper through the Xyron Create-A Sticker Mini to add adhesive to the back of it before die-cutting.  It makes the scalloped rectangle a sticker which makes it so much easier to adhere to the box.
  • Remove the protective coating off of the acetate and adhere to the backside of the box opening.
  • Remove the backing off the “rectangle sticker” and place one on the front of the opening and the second onto the back of the opening.
  • Cut a small piece of acetate slightly larger than the opening on the Donut Box.
  • Gently fold Donut Box on the score lines.  Glue the side tabs together to form the box.

How to Make a Mini Donut Box Gift Card Holder

  • Cut the donuts out of cardstock.
  • Use the light tan Tombow Maker* around the edges of the Donuts to give them a “baked” look.

How to Make a Mini Donut Box Gift Card Holder

  • Place the “sprinkles” paper into the Xyron Create-A-Sticker Mini* design side up.
  • Turn the knob of the machine to run the paper through it.  As it goes through the machine it adds a layer of adhesive to the paper.

How to Make a Mini Donut Box Gift Card Holder

  • Cut the “icing for the donuts” out of the “sprinkles” paper and place it onto the cardstock donuts.
  • Cut a small 2 1/4″ x 3 1/2″ rectangle tray to fit inside the donut box.
  • Add thin 3D foam squares to the back of the donuts and stick them onto the tray.
  • I added two braided loops and taped them under the tray with regular tape.  I cut a second 2 1/4″ x 3 1/2″ piece of decorative scrapbook paper and adhered it under the donut box tray with the thin 3D foam squares.

How to Make a Mini Donut Box Gift Card Holder.

  • Cut a small tag using the tag die that comes with the Donut Box Die Set.
  • Cut two small flowers and two leaves using the Petite Flowers Die Set.  Add pink to the edges of the flowers using the #800 Pink Tombow Marker.
  • Carefully scrunch the flower with your fingers to give the flower shape.
  • Glue the flowers and leaves together onto the tag.

How to Make a Mini Donut Box

The Donuts look good enough to eat.

How to Make a Mini Donut Box Gift Card Holder.

Hide a gift card to your favorite donut shop or money under the donut tray for a sweet little surpris