Spooky Scary Halloween Card

Open if You Dare!

Here’s a spooky card for all you Halloween Lovers.

If you love a card with dimension, this card has a lot of spooky goodness.

The Spooky Scary Halloween Card was made using the “Spooky Scary” stamp and die set from

The Maker’s Movement.

Disclosure:  This is a sponsored post.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own.

Materials Used:            (*affiliate link)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

My process for making cards sometimes changes as I sit down to create.  I was getting into this

one and decided to forgo all the step by step pictures.  Instead, I will give you lots of details.

Here’s one tip I highly suggest.  (Especially with the skeleton die.)

Run the white card-stock through the Xyron Create-A-Sticker Machine* before cutting out the

skeleton die.  The Xyron Create-A-Sticker Machine* puts adhesive on the back of the

card-stock, making the skeleton pieces stickers.  By making stickers, adhering the skeleton

to the coffin was so much easier than using liquid glue.

  • I cut a piece of double-sided adhesive foam large enough to cut the casket shape.  I adhered a piece of gray card-stock to one side of the foam before die-cutting.
  • To cut the casket shape.  Place the casket die on the foam and run it through the Crossover II Die-Cutting Machine.  Because the foam is so thick, you may want to run it back and forth a couple of times to make sure the die cuts entirely through the foam.
  • Another good tip…Use a black chisel tip paint marker* to color the sides of the craft foam.

  • The lid of the casket was made by sticking two pieces of black patterned scrapbook paper together and die-cutting the scrapbook paper with the casket die. (I used the Xyron Sticker Maker)
  • Adhere a piece of scrapbook paper onto a piece of adhesive foam.
  • Using the casket outline die, cut a casket outline from the foam. Stick the casket outline on the inside of the lid.
  • Fold two small pieces of paper to use as the hinges. Glue only the top and bottom of the hinges. Not on the side of the casket.

  • Before sticking the casket onto the layered card base, attach a thin black string onto the back of the casket.
  • If you don’t have black string, put a little black paint between your thumb and index finger and run the string through the paint.  Voila, black string.
  • Tie string around the casket to keep the lid closed.

Save

Save

Toil & Trouble Halloween Shaker Card

Double, Double Toil & Trouble

I’m mixing up a little Halloween fun in the cauldron with this cute little shaker card.

The shaker card uses the “Witch, please” stamp and die set from the Maker’s Movement.

Disclosure:  This is a sponsored post.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own.

Materials Used:            (*affiliate link)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to Make a Toil and Trouble Halloween Shaker Card….

There are several different ways to make a shaker card.  (This is how I decided to make this one.)

Directions:

  • Cut a piece of double-sided adhesive craft foam approx. 3-1/4″ x 4-3/4″.
  • Using the caldron outline die, die-cut the caldron shape into the craft foam.
  • Cut a piece of scrapbook paper approx. 4″ x 5-1/2″.  Die-cut the cauldron shape into the scrapbook paper.
  • Cut a small piece of acetate to cover the opening of the caldron.
  • Remove protective coating off the acetate.
  • Remove the protective liner off the double-sided adhesive craft foam.
  • Stick the acetate over the opening.

  • Line up and stick the cauldron opening of the scrapbook paper over the cauldron opening of the craft foam and acetate.
  • Trim the excess paper using a cutting mat and craft knife.

  • Turn the craft foam over and fill the cauldron with Spooky Shaker Sprinkles.  Make sure not to overfill, you want to leave enough room for the sprinkles to shake.
  • Cut a second piece of acetate to cover the cauldron opening.
  • Pull back the protective liner on the craft foam and place the acetate over the opening.

  • This is a little pro tip…I used a black calligraphy paint pen marker to color the sides of my craft foam.  The white core would have just made the foam stand out and not in a good way.  I like to use a black marker to cover the edges of my darker colored paper that would have a white or light core.

  • When using small or thin die-cut shapes, I like to run the paper through the Xyron Create-A-Sticker Maker* before cutting out the shapes.  (It makes it so much easier to apply.)
  • Cut a cauldron outline from glossy copper card-stock and stick onto the acetate.
  • Cut the boiling pot shapes out of light green card-stock and stick on the top of the cauldron.

    • Die-cut small bubbles from the die set and mount using thin black adhesive 3D foam squares* over the various circles of the scrapbook paper.
    • Stamp words in black ink onto a small piece of aged parchment card-stock.  Mount onto the front of the card using thin black foam squares.
    • Remove the protective liner from the back of the craft foam and stick onto a glossy card-stock layer.
    • Add the additional layers onto a black card.

Save

Save

Save

Save

Save

Save