How to make a Holiday Door Hanger

How to make a Holiday Door Hanger

Welcome your guests this Winter Season with a Snowflake Door Hanger

that you can leave up until Spring.

How to make a Holiday Door Hanger

The White Snowflake Welcome Door Hanger measures 10″ and is happy hanging as a

Holiday Welcome on your front door or just hanging out on the wall.

Add it to the center of a wreath for even more pizazz.

How to make a Holiday Door Hanger

Materials Used:      (*affiliate link)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to make a Holiday Door Hanger

Directions:

  • Cut the Welcome Snowflake out of StyleTechCraft White Ultra Metallic Vinyl* using the Welcome Snowflake SVG file and a Silhouette Cameo Electronic Die Cutting Machine*.
  • Remove the excess vinyl from in and around the snowflake and cut letters.
  • Paint the 10” Unfinished Wood Circle* with one or two coats of black acrylic paint.
  • Lightly sand over the painted area with a Sanding Block* to smooth the grain.
  • Drill a small hole in the top of the wood circle for hanging.
  • Trim the paper around the vinyl snowflake and lay it onto the wood circle to determine the placement of the red stripe. Line the tip of the snowflake with the top hole.
  • Place a pencil mark on each side of the first double line. Draw a line between the two pencil marks.  Measure two inches down from the first pencil marks and draw a second line.
  • Place Removable Painters Tape* above and below the pencil lines.
  • Paint the area within the two-inch strip with red acrylic paint.
  • Lightly sand over the red paint to smooth.

How to make a Holiday Door Hanger

  • Cut a 10” x 10” piece of gridded vinyl transfer paper*. Remove the backing from the transfer paper and place it over the vinyl snowflake welcome.  Rub over the transfer paper* with a vinyl scraper tool to make sure that the vinyl has transferred.  (You can use a bone folder or credit card to rub over it if necessary.)  Remove transfer paper.
  • Add the piece of natural twine through the top hole for hanging.

How to make a Holiday Door Hanger

  • To make the bow, you’ll need approximately 24” of ribbon.
  • Fold the ribbon in thirds.

How to make a Holiday Door Hanger

  • Gather and wrap red twine around the center of the ribbon a couple of times and tie tightly. Add jingle bell to the twine and tie again.
  • Using a hot glue gun, glue the bow to the top of the wood sign, glue greenery under the bow.

Red Snowflake Welcome 10" Wood Door Hanger

The Red Snowflake Welcome is another example of what you can make.

I used a walnut stain on the wood base and a dark red metallic snowflake for a completely different look.

“This is a sponsored post.  As a member of the StyleTechCraft Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Don’t Miss Out…more workshop pictures

Have you been thinking about signing up for Sue’s Holiday Workshop?

Would you like more pictures of the projects you can make with the Workshop Kits

so you can decide?  Look no further cause here they are.

White Snowflake Welcome Wood Door Hanger

The White Snowflake Wood Door Hanger measures 10″ and is happy hanging as a

Holiday Welcome on your front door or just hanging out on the wall.

Add it to the center of a wreath for even more pizazz.

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Red Snowflake Welcome 10" Wood Door Hanger

When you order your kit, you will have the choice of a white or red snowflake. 

The Welcome Snowflake is made using Ultra Metallic Glitter Vinyl from StyleTechCraft.

The Workshop Kit includes a 10″ wood circle, vinyl snowflake greeting, transfer paper,

gray/red plaid ribbon, a jingle bell, and greenery. (You will need to provide acrylic paint.)

The Red Snowflake Welcome is another example of what you can make with the supplies

found in your kit.  I used a walnut stain on the wood base for a completely different look.

Red Plaid Embroidery Hoop Ornament

The Embroidery Hoop Ornament is a quick and easy project with lots of opportunities

for personalization.  You have the choice of the red flannel shown, a soft grey flannel,

or red and black buffalo check flannel.

You will get several words that you can choose from to stencil onto the cream twill ribbon.

The Embroidery Hoop Ornament measures approx. 4″ when finished.

(you will need a glue gun for this project)

Holiday Joy Gift Card Money Holder

The Holiday Joy Gift Card/Money Holder is great for sticking a little money

or a Starbucks gift card.  Who wouldn’t love getting that for Christmas?

The card uses the Coffee Die Set from The Maker’s Movement.

The sleeve around the coffee cup uses the NEW Eileen Hull Sweater Embossing Plate*.

Warm & Cozy Embossed Sweater Card

The Warm & Cozy Card also uses the New Sweater Embossing Plate from Eileen Hull and Sizzix.

I’m in love with this new embossing plate and can’t wait for you to see how lovely it is in person.

Cardinal Shaker Card

Shake Things Up with a cute Cardinal Shaker Card. 

This card is made using dies and Jingle Bell Shaker Sprinkles from The Maker’s Movement,

and paper from Simple Stories Make It Merry Collection*.

Warm & Cozy Card and Embroidery Hoop Ornament

A little more about Sue’s Holiday Workshop…

For the last decade (plus), I have looked forward to hosting my annual “Sue’s Holiday Workshop” every November. It’s my Holiday Christmas Party with friends. This stupid pandemic has made it hard. Last year we did an abbreviated version of the Holiday Workshop with fewer projects and an affordable price. This year I’ve decided to do the same. I hope that next year, we will finally get to come together in person. It’ll be a full day of Holiday Crafting Fun. (I’ll probably start planning as soon as this season is over.)

Sue's 2021 Holiday Workshop Samples

If you’re Interested in this years Holiday Workshop Kit click here for all the details.  

Or send me an email at suesholidayworkshop@yahoo.com