Gift Giving with Joy

A Blanket for Peyton…

Make a simple gift personal by adding a little “Joy” to your gift with iron-on embroidered letters.

You will need:

Directions:

  1. Set iron to cotton setting, approx. 350° or follow blanket care label.
  2. Remove letters from sheet.  Position letters with shiny side down on blanket.
  3. Cover letters with a fine cloth.  With firm pressure iron cloth over the letters for 25 seconds.
  4. Turn blanket over and iron the back of the letters for 25 seconds.  Allow to cool for 1 minute before handling.
Look for Joy® iron-on embroidered letters and floral appliqués at your local craft store.

“This is a sponsored post.  As a member of the Joy® Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Shop Your Fav Brands at Scrapbook.com

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Storing Guy Stuff with Style

Getting to the nuts and bolts of Guy Storage.

Just because it’s in the Garage doesn’t meant it can’t have a little style.

After watching every episode of Tidying Up and a few episodes of Hoarders,

I’ve got the urge to organize everything.

I’ve been going through the house bit by bit (not quite the Marie Kondo way).

It’s going to take some time.

There are so many storage options out there.

When it comes to organizing all the bits and pieces out in the garage,

I’m a fan of Deflecto’s Tilt Bin Storage.

For this project I decided to add a little personalization using StyletechCrafts polished metal

adhesive vinyl and Interlocking Tilt Bins* from Deflecto.

Disclaimer:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

For a little masculine style…

I measured and cut the black polished metal vinyl* to add to the top of the bins.

I did the same with silver polished metal vinyl* to the sides of the bins.

Using my Silhouette Cameo Wireless Cutting Machine* and a SVG cut file

I cut the frames, words and background.

Using Vinyl Transfer Tape* I applied the silver frames onto the black background.

(I created the black background by cutting a slightly bigger frame and using the inside.)

The bins are interlocking and stackable.

Great for little storage needs in the garage, craft room, nursery, kitchen and even the kid’s room.

Wherever you need a little extra storage.

The nice thing about the interlocking tilt bins* is that you can use just one or use several.

You can also hang them on the wall or use them with a mounting bar*.

Storing Guy Stuff with Style.

I love adding a little personalization to everyday items.

Storing Guy Stuff with Style-Sue's Creative Workshop www.sueeldred.com 2609

“This is a sponsored post.  As a member of the StyleTechCraft Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

You can now find the full line of StyletechCraft online at ATSM.


You can purchase the Deflecto Interlocking Tilt Bins* by themselves or as a set of four from Amazon*.  Use on table, mount direct to wall or hang using the Deflecto Mounting Bar* (sold separately).

When your favorite cashmere sweater has a hole…

When your favorite Cashmere Sweater has a hole in it you make it into something new.

I was pretty bummed when I found out my favorite sweater had a hole in it.

My first instinct was to throw it in the garbage.

 After retrieving my sweater from the throw away pile…

I decided to make it into a super soft pillow instead.

To make the DIY Sweater Pillow I used:                                  (*affiliate link)

Shop Your Fav Brands at Scrapbook.com

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

DIY Upcycled Sweater Pillow

Directions:

  1. Turn the sweater inside out.  Line up the pillow form with the sweater to determine best placement to hide the holes.
  2. For my sweater, since the holes were on one side…I decided to sew the bottom of the sweater together first and insert the pillow to determine how much I needed to cut off the other side.
  3. Cut the sweater slightly larger than the pillow form.
  4. Remove pillow form and sew second side together.

5.  To Personalize my pillow…Turn sweater back to right sides and iron the Joy Iron-On Embroidered Letters.  Cover letters with a clean soft cloth and iron the letters for 30 seconds.  Turn sweater pillow cover inside out, cover with cloth and iron for and additional 30 seconds.  Allow letters to cool before finishing the pillow.    

6.  Because there is a lot of give with the sweater material.  I was able to sew the 4th side       halfway and stuff the pillow form inside.  I hand sewed the pillow closed.

7.  To dress up the pillow…I created a sash to go around the pillow by sewing together flannel scraps.


 

    8.  Secure the sash around the pillow using a couple of big black buttons.

The pillow is perfect for marking my spot on my favorite comfy chair.

Look for Joy® iron-on embroidered alphabet letter sheets and appliques at your local craft store.

“This is a sponsored post.  As a member of the Joy® Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

  

Don’t Miss a Thing…Make Sure to Follow me

 

Shop Amazon Scrapbooking Supplies*

Personalize your Christmas Stocking with Joy

Taking a simple stocking from plain to personality is easy with Joy embroidered letters…

I picked up a simple linen stocking at my local craft store.

It was nice enough, but it needed some personality.

I decided to embellish the stocking with Joy iron-on letters, ribbons and trim.

Here’s what I used on my stocking:                (*amazon affiliate link)

Directions:

  • Depending on the fabric and lining content of your stocking, you can either iron on the letters or glue them onto the stocking with craft glue.
  • Make a simple bow by folding the ribbon over and tying the center tight with the twine.
  • Add a jingle bell and a small piece of pine craft stem to the center of the bow and tie again with the twine.
  • Add button to both ends of the twine and tie to the center of the bow.
  • Trim the ends of the bow.
  • I switched out the plain wood button on the center of the button for one that better fits my style.
  • Glue trim and bow onto the front of the stocking with craft glue.
  • Embellish with a Christmas pin.
  • Add presents or greenery and berries to the inside of the stocking.

You could hang that stocking from the mantel or….

Doesn’t it make a great addition in the center of my Christmas Wreath.

You can find Joy® iron-on, embroidered letters and number sheets in a variety of sizes, colors, and fonts at your local craft stores.

“This is a sponsored post.  As a member of the Joy® Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Shop Your Fav Brands at Scrapbook.com

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Creating Word Art with Monograms

Create Personalized Word Art for your home with framed Monograms.

A Quick and Easy DIY Home Décor project to make using Joy Embroidered Monogram letters.

Here’s what I used:

*Disclaimer:  This post uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

  • Cut the paper to fit inside frame.
  • Glue monogram letters to paper.
  • Insert into frame.
  • Glue flowers to outside of frame.

 

Try creating a custom wall display using the word “FAMILY”.

Additional sizes of embroidered monograms are available for endless word fun.

You can find Joy Iron-On letters at your favorite craft stores!

This project was sponsored by Joy SA.

Shop Your Fav Brands at Scrapbook.com

Shop Amazon Scrapbooking Supplies*