Spooky Scary Halloween Card

Open if You Dare!

Here’s a spooky card for all you Halloween Lovers.

If you love a card with dimension, this card has a lot of spooky goodness.

The Spooky Scary Halloween Card was made using the “Spooky Scary” stamp and die set from

The Maker’s Movement.

Disclosure:  This is a sponsored post.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own.

Materials Used:            (*affiliate link)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

My process for making cards sometimes changes as I sit down to create.  I was getting into this

one and decided to forgo all the step by step pictures.  Instead, I will give you lots of details.

Here’s one tip I highly suggest.  (Especially with the skeleton die.)

Run the white card-stock through the Xyron Create-A-Sticker Machine* before cutting out the

skeleton die.  The Xyron Create-A-Sticker Machine* puts adhesive on the back of the

card-stock, making the skeleton pieces stickers.  By making stickers, adhering the skeleton

to the coffin was so much easier than using liquid glue.

  • I cut a piece of double-sided adhesive foam large enough to cut the casket shape.  I adhered a piece of gray card-stock to one side of the foam before die-cutting.
  • To cut the casket shape.  Place the casket die on the foam and run it through the Crossover II Die-Cutting Machine.  Because the foam is so thick, you may want to run it back and forth a couple of times to make sure the die cuts entirely through the foam.
  • Another good tip…Use a black chisel tip paint marker* to color the sides of the craft foam.

  • The lid of the casket was made by sticking two pieces of black patterned scrapbook paper together and die-cutting the scrapbook paper with the casket die. (I used the Xyron Sticker Maker)
  • Adhere a piece of scrapbook paper onto a piece of adhesive foam.
  • Using the casket outline die, cut a casket outline from the foam. Stick the casket outline on the inside of the lid.
  • Fold two small pieces of paper to use as the hinges. Glue only the top and bottom of the hinges. Not on the side of the casket.

  • Before sticking the casket onto the layered card base, attach a thin black string onto the back of the casket.
  • If you don’t have black string, put a little black paint between your thumb and index finger and run the string through the paint.  Voila, black string.
  • Tie string around the casket to keep the lid closed.

Save

Save

Some Bunny Loves You Spring Card

How to make a “Some Bunny Loves You” Spring Card

Send a little Love and Encouragement to someone special using the Some Bunny Loves You

Stamp and Die Set from The Maker’s Movement.

*FTC Disclosure… “This is a sponsored post.  I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.”

Supplies used to make the card:                                     (*affiliate links)

Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Directions:

  • Stamp the bunny image onto a 2″ x 3″ piece of white heavyweight acrylic paper.
  • Start coloring the edges of the bunny with the saddle brown marker and blend the colors together using the light sand marker.  ( Stamping on non-porous white card-stock helps the markers blend easier.)
  • Highlight the bunny cheeks and inside of the ears with the baby pink marker.

  • Stamp a “heart balloon” and “small banner” onto a piece of  “Sunday dress” (purple) scrapbook paper.  Stamp the word “hugs” in the center of the balloon.  Stamp the words “hopping you all the best” centered inside the banner.
  • Align stamped heart image with the heart die and cut using the Crossover II*.
  • Cut the banner image using scissors.
  • Cut a 2 ½” x 3 ½” piece of “baby bunnies” (small flowers) scrapbook paper.  Cut the top of the paper with the wavy die and the Crossover II*
  • Adhere the small flowers layer onto  a 3 ½” x 4 ¾” piece of “blue skies” scrapbook paper.

  • Cut a 2 ¾” x 3 ¾”striped layer and round the corners of the layer using a rounded corner punch*.  Adhere onto the small layer onto the previous layers.
  • Add 3-D foam mounting squares onto the back of the bunny and balloon and adhere to the front of the striped layer.  Adhere the small banner using the tape runner to the lower right section of the striped layer (overhanging the edge).
  • Glue small hearts onto the front of the card using craft glue.

  • Adhere the layers onto a thin turquoise layer and then onto a 4″ x 5 ¼” piece of “Sunday dress” (purple gingham) scrapbook paper.  Adhere onto a 4 ¼” x 5 ½” white card-stock card folded vertically.  Tie a sheer ribbon around the top of the card.