DIY Resin Margarita Necklace

DIY Resin Margarita Necklace

How to Make a Resin Margarita Necklace…

When I was in Orlando last month for the Namta Trade Show, I received a box

of YouV Art Resin to try.  With Summer coming, I decided to have a little fun

and make a Margarita Necklace.  (I needed it last week for Cinco de Mayo.)

YouV Art

Disclaimer:  This is a sponsored post.  I have been provided product in exchange for my creative ideas.  The views and opinions are my own.

DIY Resin Margarita Necklace

DIY Resin Margarita Materials Used:    (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

DIY Resin Margarita Necklace

Directions:

  •  YouV Art resin is easy to use. No mixing or pouring and with minimal bubbles.
  • Squeeze a small amount of green jewelry resin from the tube onto the bottom of the mold. (Do not fill the mold.)
  • Add a small amount of yellow jewelry resin on top of the green. Swirl with a toothpick if desired.
  • Add a small layer of clear jewelry resin on the top of the mold and add the tiny ice cubes.
  • Use the UV flashlight to cure the resin for 10 seconds.

DIY Resin Margarita Necklace

  • Squeeze additional clear jewelry resin into the mold. Add slices of limes and margarita sprinkles from the Mixed Drinks Shaker Sprinkles*.  Cure using the UV Flashlight for an additional 10 seconds.
  • Add a thin line of resin over the ice cubes and add more ice cubes so that the cubes are higher than the mold.  Cure using the UV Flashlight.
  • After you finish layering your margarita, fill the mold with clear jewelry resin.
  • Use the UV Flashlight to finish curing the remaining resin for 30-60 seconds.
  • It easily pops out of the mold without the need of a releasing agent.  (No need to wait.)

DIY Resin Margarita Necklace

DIY Resin Margarita Necklace-Sue's Creative Workshop www.sueeldred.com 3612

This was so much fun to make.  Especially since I am an impatient person. 

It is quick and easy to use.  It is great for layering because you can use

a little at a time, cure it, and then keep adding more as you go.

YouV Art Resin

While I had the resin out, I decided to play a little more. 

I used Clear Jewelry Gel and eyes from the Witches Brew Shaker Sprinkles* and the Hex Jewelry Mold to make dimensional eyes that I can use on a later project.

YouV Art Resin

  • To make the Heart Embellishment, squeeze a small amount of Clear Jewelry Resin into the bottom of the mold. Add a small pink heart on top the resin using the Sweetheart Shaker Sprinkles*.
  • Cure the resin with the UV flashlight for 10 seconds.
  • Finish filling the mold with Red Jewelry Resin.
  • Use the UV flashlight for 30-60 seconds to finish curing the resin.