Red, White and Blue Star Shaker Tags

Star Shaker Tags

I love making cards and tags that move and shake.

Generally, making Shaker Tags are fun and easy to make.

But I sometimes tend to make things harder than they need to be?

That was the case with the Star-shaped Shaker Tag.

After working on it and getting frustrated because the vision I had wasn’t quite working out,

I set it aside and went for a simpler version.

As you can see, I did finish the Star Tag and like how both of them turned out.

How to Make a Star Shaker Tag for the 4th of July

The Maker’s Movement Products Used:         (*affiliate link)

*FTC Disclosure… “This is a sponsored post for The Maker’s Movement.  I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.”

Additional Products Used:            (*affiliate link)

 

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Directions: 

  • Cut two tags using the Nested Tag Die Set.  The larger out of red cardstock and the smaller out of red, white, and blue floral print.

  • Adhere the tags together using the tape runner.
  • Die-cut both layers with the star die. Once happy with the placement, put a small piece of removable painters tape* over the star to keep it from moving when it is die-cut.
  • Lay banner die onto the tag to help figure the correct placement for the star hole.
  • Place the tag and die onto the Crossover II Die-Cutting System*
  • .Place clear acrylic protective plate over the dies and crank the handle to run the die through the machine.

  • Cut a small piece of acetate to fit over the star opening.  The acetate comes with a protective liner on both sides.  You will need to remove both sides before adhering it to the tag.

  • Pick out Red and Blue Shaker Sprinkles, from the Rainbow Sprinkles, to use for the inside of the shaker tag.

  1. On the back of the die-cut tag, place tear it tape adhesive around the opening of the star.
  2. Remove protective liner off the tape.  Place acetate over the star opening.
  3. Cut a second red tag.  Place strips of adhesive craft foam around the star to make a well around the star.  Add additional strips around the bottom and top.
  4. Add red and blue sprinkles in the well around the star.  Remove protective liner off the back of the foam strips and adhere to the second red tag.

  • Center two star together, place a piece of removable painters tape* on the dies to keep them from moving.  (The smaller star is the same size as star opening.)  Run the dies through the Crossover II die-cutting machine to create a star frame.

  • Adhere star frame over the star opening.
  • Cut a banner out of plaid paper.
  • Stamp “Celebrate with a bang!” (from the Home for the Holidays stamp set)  Trim down to fit onto the plaid banner.
  • Glue pleated ribbon around the bottom and top of the tag.
  • Punch hole in the top of the tag.  The Crop-A-Dile Punch* easily goes through all the layers.
  • Tie twine together and loop through the hole.
  • Glue small star and flag embellishments onto the tag.

Close up of the Star Shaker Tag

  • I used the largest of the Nested Star Die for the outline of the star.
  • What made the process a little more difficult for me was that I also cut a foam star the same size.  I had problems getting the foam star to line up and had to set it aside momentarily.
  • A small star cut out of foam and scrapbook paper was used as the dangler on the tag.
  • I cut several banners to use on the front of the tag.
  • You can find the small banner instructions here.

Here’s another tag that I made for The Maker’s Movement using the Nested Star Dies. 

Save

Save

Patriotic Themed Summer Party

Celebrate the Red, White, and Blue!

No matter if your party is big or small.

It’s easy to throw together a Red, White, and Blue Patriotic Themed Summer Party.

Gather up some hotdogs, burgers, and brats for the perfect Summer BBQ Get-Together.

Here are a few Ideas to make the Summer Holidays fun and special.

Grab and Go Party Ware.

Bring Deflecto to your next party.

I used a Deflecto Stackable Caddy Organizer* to hold my tableware and condiments

for easy grab and go.

Disclosure:  “This is a sponsored post. As a member of the Deflecto Design Team I have been provided product and compensation in exchange for my creative ideas, views and opinions.”

Bold Stripes and Bright Stars

Every party needs a few yummy desserts.

The 3 Tier Dessert Stand* from Deflecto is perfect for displaying cupcakes and other goodies.

It is easy to put together and folds flat for compact storing.

All three tiers on the stand have holes for holding cake pops.

They were the perfect size for inserting small flags and the handmade banner for the top.

How to make the Banner…

  • Cut two bamboo skewers 6″ each.  Wrap the ends with decorative washi tape.  The washi tape helps keep the skewers securely in place when inserting in the stand.
  • Die-cut or hand-cut 5 banners out of decorative scrapbook paper.
  • Tie a piece of blue and white twine on each end of the bamboo skewers.
  • Fold banners and adhere to the twine.
  • Apply letter stickers on the front of the banners.
  • I used red glitter vinyl and my silhouette die-cutting machine to create the words USA to apply to my banners.
  • Stick on each side of the top tier in the holes made to hold cake pops.

Little details make everything more festive.

Don’t forget to make a few star picks to stick into the cupcakes.

This is a fun project that the kids can help you make.

  • Create the picks by punching or die-cutting several blue and red stars.
  • Add adhesive to the back of the star and place a toothpick in the center.
  • Adhere a second star on the back.
  • For quick and easy work, I used the Xyron Create-A-Sticker* to add adhesive to the stars.
  • Decorative the stars with additional small foil stars.

Add a touch of Vintage Americana with blue Ball mason jars. 

They are great for storing straws, and they also make great drinking glasses.

And when the sun starts going down, don’t forget the sparklers and glow in the dark novelties.

Summer Fun Party Decorations Ideas:

I found most of my supplies at Michael’s Craft Store, Dollar Tree and Walmart.

←PIN ME

Products Used for your convenience…

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Save

Celebrate with Matte Removable Vinyl

Create Festive Door Decals for the 4th of July!

I was decorating and getting the house ready for our 4th of July Pool Party…

when I got the idea to use my new Matte Removable Vinyl to create 4th of July door decals.

They were super simple to make and they add a fun festive touch.

To make my 4th of July Door Decals…

  • I cut the vinyl letters and number using my Silhouette Cameo 3*.
  • I cut additional small white stars to stick onto the blue number.
  • I easily transferred everything onto my door using the Vinyl Transfer Tape*.

I put one onto the backdoor heading into the pool area and the other onto the door leading

into the house from the garage.

Because family don’t use the front door!

I also used the vinyl to jazz up the plain metal tin to hold cutlery.

Did you know that this vinyl will remove cleanly for up to two years?

This vinyl  film is great for decorating a kid’s room, a classroom or just about anywhere

you just  need a temporary graphic.

And, with 27 colors available, it’s not hard to find the perfect color for whatever you can

dream up!

“This is a sponsored post.  As a member of the Tape Technologies Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Shop Your Fav Brands at Scrapbook.com

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Sparkle your 4th…

Sparkle your 4th…

For the 4th of July, I decided to create a round-up of my past 4 favorite patriotic projects.

Enjoy!

Recycle your old blue wine bottle into a festive display.

Enjoy the party with friends.  (maybe even empty another blue wine bottle)

To make the project… read here.

Red White and Blue Table Top Decoration

White picket fences, fireworks and the good old red white and blue. 

A 4th of July Celebration Centerpiece with Fireworks, Flags, Banners and Pinwheels all

rolled into one.     To see how I made it… read more.

Welcome your visitors with an Americana Wreath for your front door.

How to make the Americana Ribbon Wreath

  • I used a 14″ ruled wreath from Smoothfoam.
  • Glue one end of the ribbon down onto the foam wreath and wrap the ribbon tightly around the first section.  Glue second end of the ribbon in place before starting second color. (I used Beacon Fabri-Tac Permanent Adhesive* to glue my ribbon in place.)
  • Using a thin floral wire, wire the small floral stems onto the base of the wreath.
  • Glue larger flowers and leaves onto the wreath over the wire.
  • Add large stemmed butterfly and ribbon to hang.

So many possibilities.

For more information… read more.

Deck out the deck with a fun denim banner made from old jeans.

Got any old worn blue jeans ready to be thrown out?

I started with my old blue jeans and 3″ Iron-on Embroidered Varsity Letters from Joy

in red and blue.

For more pictures and instructions read here.

Shop Dollar Tree for Red White & Blue Party Supplies*                      (*affiliate link)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

      

For Creative inspiraton…Make Sure to Follow me.

Shop Your Fav Brands at Scrapbook.com

My Americana Crafternoon…

Yesterday, I had an amazing time with a few of my crafty friends thanks to an opportunity to

host an Americana Soiree from Adornit.

The weather was beautiful for a get together and I decided to hold our Americana Crafternoon

in my Garage/Party Room.  A couple degrees cooler would have made it perfect, but, no one

complained.

We crafted and talked…  (and made some really cool projects)

Even my little buddy stopped by at the end and helped me finish one of my projects.

And the best part for me…

because everything was pre-kitted and ready to go, I even got to sit down and make something.

I had a wonderful time.  Thanks ladies for coming over and crafting with me.

Next time, I’ll remember to take a group picture.

Shop Amazon Scrapbooking Supplies*

Disclaimer:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

woven-pear-socks

 

“Celebrate” with a Banner made from old blue jeans

Create a banner using Joy Embroidered Iron On Letters and old blue jeans.

When inspiration hits in the middle of the night, it usually ends of being one of my favorite

kind of projects.  (This one  was fun.)  

Got any old worn blue jeans ready to be thrown out?

I started with my old blue jeans and 3″ Iron-on Embroidered Varsity Letters from Joy

in red and blue.

I created a 3 1/2″ x 5 1/2″ banner pattern using grid paper and traced it onto the jeans.

To add a little interest…I incorporated the seams from the sides of the jeans to use for the

front of the banner.  For the word “C-E-L-E-B-R-A-T-E”  I cut 9 banners for the front with

seams and 9 plain ones to use to line the back of the banner.

The Iron-on Embroidered Varsity letters are sticky backed so I went ahead and placed

them onto the front of my banners before sewing.

Next came my jar of red ribbon scraps.  (I love red so much, I have a jar just for “red”)

I sewed the ribbon scraps onto the tops of each banner.

I then sandwiched the front with a plain back and simply sewed around each banner with

my sewing machine.  After the third banner, I finally got smart and started using straight pins.

As you can tell, I was going for a casual simple look.  (that’s my story and I’m sticking to it)

After I was finished sewing all my banners, I used my We R Memory Keepers Crop-A-Dile*

to punch two holes.  (I used the 3/16″ sized hole.)

I used We R Memory Keepers Eyelets Cool Metal* (affiliate link) for my eyelets.

Did you know that the  Crop-A-Dile* easily goes through both layers of jeans.

Join Amazon Kindle Unlimited 30-Day Free Trial

Disclaimer:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

 

The “Celebrate” banner was created for and sponsored by Joy.

How to make a Patriotic Red, White and Blue Etched Wine Bottle

Celebrate the holidays with a Red, White and Blue Etched Wine Bottle.

I’m getting ready for a Americana Crafternoon this week-end with a fun group of ladies

and thought I’d make up a few decorations.  As luck would have it, I just happened to

have an empty blue wine bottle.   I thought to myself, that would make a perfect vase.

I added red flowers to a 50 cent Garage Sale-Flag Basket and now I have a festive display.

Shop Dollar Tree for Red White & Blue Party Supplies*                      (*affiliate link)

To make the Red, White and Blue Etched Wine Bottle I used…             (*amazon affiliate links)

Directions:

  1.  Clean and remove the label off a blue glass wine bottle with warm soapy water.  (Dry)

 

2.  Mask off a 2 ½ to 3 inch section on the center of the wine bottle with blue painter’s tape.  Burnish the edges of the tape with your fingertip, the tape should lay flat against the bottle.

3.  Punch stars out of the etchall etchmask* Remove backing from the stars and stick randomly on the bottle.  Burnish the stars with your fingertips onto the bottle.

4.  Apply a heavy coat of etchall Etching Crème*   onto the bottle using the squeegee.

5.  Let crème sit for 15 minutes.  (You will need to keep an eye on the bottle to make sure etching crème doesn’t run past the blue painter’s tape.)  Scrape excess etching crème from the bottle and return the extra etching crème back into the bottle. It’s reusable.

6.  Rinse bottle with warm water to clean.  Remember to keep crème away from porcelain or ceramic tiles.  Remove tape and stars and dry.  The bottle will have a nice subtle etching.

7.  While I liked the subtle look… I decided I wanted something a little bit brighter for my patriotic bottle.   I dried brushed white acrylic paint over the etched surface.  Wipe off excess paint with a damp cloth for a white washed look.  The paint only sticks to the etched surface.  (How cool it that.)  It really makes the stars pop.

8.  Re-mask the bottle with the blue painter’s tape, this time covering the etched surface.  Paint the bottom of the bottle with the colonial red spray paint.

10.  Mask a small section on the top of the bottle and spray with gold spray paint.

11.  Cut a small black vinyl rectangle and round two of the corners with the corner punch.

12.  Stencil the word “welcome” from the family words stencil onto the black vinyl using a stencil brush and the multi-surface acrylic paint.

13.  Use the gold paint pen to add a thin border around the black vinyl tag.  Punch a small hole on the top of the tag and tie onto the neck of the bottle with ribbon.

Enjoy the party with friends.  (maybe even empty another blue wine bottle)

      

Don’t Miss a Thing…Make Sure to Follow me.

Shop Your Fav Brands at Scrapbook.com

Disclaimer:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

 

How to make a 4th of July Centerpiece with Fireworks, Flags, Banners and Pinwheels

What do you think about when you hear the words “4th of July”?

For me it’s… White picket fences, fireworks and the good old red white and blue. 

Or a 4th of July Celebration Centerpiece with Fireworks, Flags, Banners and Pinwheels all

rolled into one.   I created this 4th of July centerpiece a couple years ago, since it’s one

of my favorite projects, I thought I’d share it again.   Enjoy!

How to make a 4th of July Centerpiece…

Products Used:                 (*affiliate link)

Directions:

  1.  Paint the round disc with Navy Blue paint.

2.  Cut two 1” x 12” strips of the red striped paper and one 1” x 2” piece. Adhere to the side of the disc with double stick tape roller.

3.  Die-cut 7 fence sections.

4.  Paint 15 round toothpicks white. (set four aside to use later.)

5.  Cut 11 toothpicks in half. Glue one toothpick half on each end and middle of the fence with the pointed end facing down.

6.  Insert fence sections onto the top edge of the disc.

7.  Paint the 4” cube red.

8.  Cut five 3 ¾” x 3 ¾” pieces of Navy & Ivory dot paper. Adhere to the sides and top of the cube. Glue cube to center of the disc.

9. Paint two bamboo skewers white. Cut skewers to 5”.

10.  Glue small blue beads to top of each skewer.

11.  Create small ½” flags from scraps of paper and cardstock. Adhere onto a 12” piece of blue and white twine.  Tie ends of the twine to top of the skewers to make a flag banner. Insert into disc.

12.  To create Bottle Rockets:  Paint two bamboo skewers red.  Cut two pieces of red striped paper 1 3/4” x two. Wrap around pencil to curve paper. Remove pencil and roll tightly to form a small tube. Wrap a 1/2” strip of navy dot paper around tube.  Glue a small piece of twine inside of tube to create the bottle rocket wick. Glue tube onto red bamboo skewer and insert into disc. Create second bottle rocket for other side of the disc.

13.  Punch two 3” Navy and Ivory Dots scalloped circles.

14.  Cut two strips of red card-stock: 1 1/4”” x 12” and 2 1/4” x 6 1/2” . Adhere the two strips together to form one long 2 1/4” x 18” strip of red card-stock.

15.  Using scoring board and scoring tool. Score card-stock every 1/4” down the entire length. Fold strip accordion fold. Glue ends together with a strong adhesive to form a cylinder.

16.  On a flat surface, gather the bottom of the cylinder tight while spreading and pushing down on the top to create the Rosette.

17.  With a strong adhesive, attach one of the scalloped circles to the center of the Rosette. Hold into place until the adhesive starts to hold.

18.  Turn the Rosette over and attach the second scalloped circle onto the other side of the rosette.

19.  Create a second smaller rosette using a 1” x 12” strip of red striped paper. Score strip every 1/4”.  (repeat steps 16 and 17)

20.  Glue blue button into center of the rosette to hold in place. Glue onto center of the scalloped circle. Add star sticker to center of button.

21.  Paint a bamboo skewer with Navy paint. Cut into a 5” piece. Insert into back of finished Rosette.

22.  Insert finished Rosette into top of the 4″ cube.

23.  Create small pinwheels by adhering two pieces of 1” x 1” paper together.  On each corner, cut diagonally two-thirds of way to square’s center, dividing each corner into two points. Bring every other point to center so that the points overlap. Glue into place.

24.  Glue small red button to center of each pinwheel.  Glue onto white painted toothpick and insert into base.

25.  Create and print computer generated “CELEBRATE” and “4th of July” onto white card-stock.  Cut and layer to size and adhere onto picks and skewers and insert onto centerpiece.

This project was created for and sponsored by Smoothfoam and Canvas Corp Brands.

For more summer fun…click on Slimer ad below

Slimer

Disclaimer:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Join Amazon Kindle Unlimited 30-Day Free Trial

I love my Calendar Girls

I love, I love, I love my calendar girl.

You ever get a song stuck in your head?  (over and over again)

When I finished up with these samples last night, I couldn’t get that song out of my head.

For those of you not old enough to remember the song Calendar Girl by Neil Sedaka,

I suggest you “google” it.  Then you’ll have it rolling around your head just like me.

(*amazon affiliate link)

It all started with the Calendar Girls Mini Coloring Book* from ADORNit.

I simply water colored the image using a variety of inks from ink pads and a waterbrush.

(It makes me feel like an artist)

The mini coloring books are now available on Amazon*.

And… if you use the code MINIBOOK (all caps) you will be able to buy 2 and get 1 free!  

Try Amazon Prime 30-Day Free Trial

Disclaimer:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

DIY for Kids: Doodling on Craft Frames

Doodling on Craft Frames 8769

Doodling on clear acrylic craft frames…

a fun little project to make with the kids this summer that will help keep

the kids Happy and Busy.

Print out a few 4th July or Summer Fun pictures in wallet size and pick up a few

supplies and let their creativity soar.  (my frame is 3″ x 4″)

Trace around picture 4089

  • Cut a piece of white paper the size of your frame.
  • Center and trace around the picture on your paper.

Tracr around picture with ruler 4091

Using a pencil and ruler draw your grid lines on the paper.

Retrace pencil marks with black paint pen 04111

Reinsert the paper into the clear acrylic craft frame and retrace the lines.

Using paint pens or sharpies, add additional lines and doodles on the frame.

Tip:  When using paint pens, allow drying time in between adding colors.


Deflecto Mini Slanted Sign Holders, 10 Piece, 3 x 4 Inches (20006CR)

 

“This is a sponsored post. As a member of the Deflecto Design Team I have been
provided product in exchange for my creative ideas, views and opinions.”

*This post uses Amazon Affiliate links.  I am an Amazon Affiliate.