Trick or Treat Halloween Shaker Card

Trick or Treat Halloween Shaker Card

How to Make a Not So Spooky Halloween Shaker Card.

When it comes to anything Halloween, I like it more “cute” than scary. (big chicken here)

This Not So Spooky Halloween Shaker card uses Dies and Shaker Sprinkles from

The Maker’s Movement’s New Halloween Collection.

Maker's Movement

Disclosure:  This is a sponsored post  for The Maker’s Movement.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own. 

Trick or Treat Halloween Shaker Card

Materials Used:           (*affiliate link)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Trick or Treat Halloween Shaker Card

Directions:

  • I used the Halloween Scene from the Tricks and Treats paper pad for the base of my card. I cut off a 1/2″ off both sides of the paper, making it 5″ x 6″. (The finished card measures 5 1/4″ x 6 1/4″.)
  • Die-cut a large scalloped square frame out of the purple plaid paper from the paper pad.
  • Die-cut a large foam square using the foam cutter die. The foam square will fit under the scalloped square frame.
  • Because I didn’t want the white sides of the foam showing in my shaker element, I used black calligraphy (chisel point) paint marker to color the outside and inside of the foam square. Place the foam square onto the card base. (as shown above)
  • Add “Tricks and Treats” shaker sprinkles into the center of the foam square.
  • Cut a 3 1/4″ x 3 1/4″ piece of clear acetate. Remove the blue protective covering from both sides of the acetate.
  • Remove the top protective coating from the foam square and place the acetate onto the foam.
  • Add adhesive under the purple plaid scalloped square and place it over the acetate lined up with the foam square.

Trick or Treat Halloween Shaker Card

Die-Cutting Tip…

  • When cutting small die-cut pieces, I like to run the paper through the Xyron Create a Sticker Mini*.  After die-cutting, they become little stickers. That makes applying the die-cuts a whole lot easier.

Trick or Treat Halloween Shaker Card

  • Apply the Spider Web die-cut onto the inside corner of the shaker element.
  • Add the words “Happy Halloween” onto the front of the card.

Trick or Treat Halloween Shaker Card

I enjoy making cards with dimension and movement.

I think this is one of the simplest shaker cards I’ve made so far.

If you love making shaker cards, make sure to check out all the dies and cute shaker sprinkles

that are available from The Maker’s Movement.

Toil and Trouble Halloween Shaker Card

Toil & Trouble Halloween Shaker Card.

This is the Halloween Shaker Card I made last year.  You can see how it was made here.

Toil & Trouble Halloween Shaker Card

Double, Double Toil & Trouble

I’m mixing up a little Halloween fun in the cauldron with this cute little shaker card.

The shaker card uses the “Witch, please” stamp and die set from the Maker’s Movement.

Disclosure:  This is a sponsored post.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own.

Materials Used:            (*affiliate link)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to Make a Toil and Trouble Halloween Shaker Card….

There are several different ways to make a shaker card.  (This is how I decided to make this one.)

Directions:

  • Cut a piece of double-sided adhesive craft foam approx. 3-1/4″ x 4-3/4″.
  • Using the caldron outline die, die-cut the caldron shape into the craft foam.
  • Cut a piece of scrapbook paper approx. 4″ x 5-1/2″.  Die-cut the cauldron shape into the scrapbook paper.
  • Cut a small piece of acetate to cover the opening of the caldron.
  • Remove protective coating off the acetate.
  • Remove the protective liner off the double-sided adhesive craft foam.
  • Stick the acetate over the opening.

  • Line up and stick the cauldron opening of the scrapbook paper over the cauldron opening of the craft foam and acetate.
  • Trim the excess paper using a cutting mat and craft knife.

  • Turn the craft foam over and fill the cauldron with Spooky Shaker Sprinkles.  Make sure not to overfill, you want to leave enough room for the sprinkles to shake.
  • Cut a second piece of acetate to cover the cauldron opening.
  • Pull back the protective liner on the craft foam and place the acetate over the opening.

  • This is a little pro tip…I used a black calligraphy paint pen marker to color the sides of my craft foam.  The white core would have just made the foam stand out and not in a good way.  I like to use a black marker to cover the edges of my darker colored paper that would have a white or light core.

  • When using small or thin die-cut shapes, I like to run the paper through the Xyron Create-A-Sticker Maker* before cutting out the shapes.  (It makes it so much easier to apply.)
  • Cut a cauldron outline from glossy copper card-stock and stick onto the acetate.
  • Cut the boiling pot shapes out of light green card-stock and stick on the top of the cauldron.

    • Die-cut small bubbles from the die set and mount using thin black adhesive 3D foam squares* over the various circles of the scrapbook paper.
    • Stamp words in black ink onto a small piece of aged parchment card-stock.  Mount onto the front of the card using thin black foam squares.
    • Remove the protective liner from the back of the craft foam and stick onto a glossy card-stock layer.
    • Add the additional layers onto a black card.

Save

Save

Save

Save

Save

Save