Creating a Mini Thanksgiving Room

Creating a Mini Thanksgiving Room…

Time to get your rooms ready for the Thanksgiving holiday.

I love making miniature rooms, especially for the Holidays.

I created this special little room for Xyron using the Xyron Creative Station*.

The Xyron Creative Station* is perfect for projects like this.  I wanted complete adhesive coverage on every corner and edge of the paper.  (No wrinkles, no bubbles, easy to use.)

Products Used:                                      ( *affiliate links)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

To make the Mini Thanksgiving Room…

  • Cut chipboard into 4 pieces:  9″x7 1/2″, 5 3/4″ x 9″ and two 5 3/4″ x 7 1/2″
  • Cut woodgrain paper just 6″ x 9 1/4″ and run it through the Xyron Creative station design side up.   As the paper runs through the machine it adds adhesive under the paper.
  • Adhere the paper to the chipboard.  I like to cut my paper slightly wider than I need so I can trim the edges with a craft knife.
  • Gently sand edges with a extra fine sanding block for the perfect edge.

  • I cut the patterned paper half the size of the other three chipboard pieces and added a 1/2″ strip of  woodgrain paper to cover the seam.  (it looks like chair rail)
  • Using the Creative Station makes quick work of covering the walls.

  • I covered the back of my room with coordinating paper and added small strips of paper on the inside and back corners for added support.  Run those strips through the Xyron Creative Station* as well.

  • I picked up some inexpensive Doll furniture* at Dollar Tree* and painted them with black spraypaint.
  • I gave them a light sanding after they were dry with a sanding block to smooth.

  • I created additional furniture by cutting small pieces of chipboard and adhering them together.  (simple building construction)
  • A couple coats of black paint to finish the job.

  • To Make the tablecloth…Run a piece of lace through the Xyron Creative Station* and adhere the lace to the top of the table.  Trim around the edges of the lace with scissors.
  • I created a small vase with playdoh and painted it with acrylic paint after it was completely dried.  I added craft glue inside my vase and inserted snippets of artificial flowers.
  • I added a platter of turkey on the table. (don’t tell anyone but mine’s really a chicken)

A small little handmade bench for extra seating.

A shelf on the wall with special pewter pieces.

And a cute Turkey Decoration on top the sideboard to make the room more festive.

Happy Thanksgiving!

“This is a sponsored post.  As a member of the Xyron Makers Program I have been provided product in exchange for my creative ideas.  The views and opinions are my own.

If you liked the Thanksgiving Room you’ll like the Christmas Magic Room I made last year.

Annie’s Sweet Dreams Bedroom

Annie’s Sweet Dream Bedroom

I love working with miniatures and creating little rooms.

I guess…I’m creating the doll house I always imagined as a kid.

For this room, I wanted to create a “mini makeover” for Annie’s Bedroom.

This little room won me third place in the 2019 Fave Crafts Best Blogger Contest.

And now, I can finally share it all with you.

“This is a sponsored post.  I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.”

Annie’s Sweet Dreams Bedroom Products Used:                 (*Affiliate Links)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to make Annie’s Sweet Dreams Bedroom…

The Bedroom measures 7 1/2″ wide, 7 1/2″ tall and 5 1/2″ deep. 

  • Cut 3 pieces of chipboard 5 3/4″ x 7 1/2″.
  • Cut 1 piece of chipboard 7 1/2″ x 7 1/2″ to use as the back wall.

  • Cut decorative scrapbook paper from the Graphic 45 Garden Goddess 8×8 Paper Pad* to use on the floor, walls and outside walls of the room.  I like to cut my paper slightly wider than I need so I can trim the edges with a craft knife.
  • I used both cardstock and scrapbook paper to cover my walls.  For my walls…cut both papers into 3 3/4″ strips.
  • I cut a small strip of paper from the paper pad for a decorative border.
  • I ran each of my strips through the Xyron Creative Station*.
  • Adhere paper to the chipboard.
  • Cover back of the chipboard with coordinating scrapbook paper.

The Xyron Creative Station* is perfect for projects like this.  I wanted complete adhesive coverage on every corner and edge of the paper.  (No wrinkles, no bubbles, easy to use.)

Finished Inside Walls

For the Mural on the Wall…

  • I used an SVG file and my Silhouette Cameo Wireless Cutting Machine* to cut and create the words “follow your dreams” using StyleTechCraft Dark Red Ultra Metallic Glitter Vinyl.
  • Using the weeding tool, I carefully removed the negative spaces in and around the letters.
  • Place a piece of Vinyl Transfer Tape* over the letters.
  • Apply words onto the back wall.
  • Remove transfer tape.

  • Glue the walls together using a good craft glue . I like to use Beacon 3 in 1 Glue*.  I used wood boxes to hold my wall up while the glue dried.

  •  I added small strips of paper on the back corners for added support.

  • To make a mini lamp shade…punch a 3″ scallop circle.
  • Trace around a button in the center of the circle.
  • Cut out the small circle as shown in the above picture.
  • Glue ends of the circle together to form shade.
  • Glue shade onto a small painted wood spool.

  • Cut small pieces of ribbon and glue them onto a piece of twine to create a small ribbon banner to hang onto the wall.
  • Glue Banner onto back wall.
  • The Deflecto Ribbon Dispenser* is great for organizing my ribbon spools.

  • The mirror was made using a small piece of StyleTechCraft Chrome Metallic Vinyl* l placed onto a small piece of chipboard.
  • Cut 1/4″ strips of chipboard and paint brown.
  • To create a wood look, ink to the edges of the chipboard with vintage photo distress ink. 
  • Glue strip onto the front of the Chrome Metallic Vinyl* to create the frame.
  • I used small Christmas ornaments for the toys.

Creating Annie’s Sweet Dreams Bedroom was a labor of love.

With a little imagination and some basic construction it’s really not hard to do.

Creating A Miniature “Christmas Magic” Room with Graphic 45 and Xyron

 

How to Create A Miniature Christmas Room…

Graphic 45 Christmas Magic…Decorating the tree.

I knew as soon as I started working with Xyron that one day I would make a miniature room.

When I got the opportunity to work with Graphic 45’s “Christmas Magic” Collection,

I knew the time had come.  (Graphic 45 and Xyron are the perfect combination.)

FYI…read to the end for a special giveaway from Graphic 45 and Xyron.

Here’s What I used to make my Miniature Christmas Magic Room:            (*affiliate link)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to make a miniature Christmas Magic Room…

  • My Christmas Room is 7 1/2″ wide, 7 1/2″ tall and 5 1/2″ deep.  I used 5 3/4″ x 7 1/2″ chipboard pieces.  (that’s what I had on hand)  You could use a 7 1/2″ x 7 1/2″ piece of chipboard for the back wall instead of piecing it together like I did.

  • I cut paper for my walls into 3 3/4″ strips.
  • I cut a small strip of paper for my decorative border.
  • I ran each of my strips through the Xyron Creative Station*.
  • Adhere paper to the chipboard.

The Creative Station is perfect for projects like this.  I wanted complete adhesive coverage on every corner and edge of the paper.  (No wrinkles, no bubbles, easy to use.)

  • I cut my paper slightly wider than I need so I can trim the edges with a craft knife.
  • Gently sand edges with a extra fine sanding block for the perfect edge.

  • Glue the walls together using a good craft glue.  I used wood boxes to hold my wall up while the glue dried.  (If you have a better idea I’d love to hear it.)

  • I covered the back of my room with coordinating paper and added small strips of paper on the back corners for added support.

  • I made a small fireplace out of chipboard.  (I needed a place to hang my stocking)
  • Paint the fireplace with white paint.  Give it a vintage feel by rubbing a little ink on the edges.

  • I purchased inexpensive unfinished doll furniture at the Dollar Store* and painted it red.
  • For a vintage look add ink to the edges of the furniture.

  • I used stickers from the collection kit to make little framed art.

  • I made a small little crate to hold my “ornaments” out of chipboard and painted it brown.  I added a small “tis the season” sticker on the front.

  • I created a small picture using a sticker and chipboard and a small felt stocking to add to the mantel.

I have spent way to much time rearranging the furniture and playing with it.

It was a real labor of love.  (and I loved every minute of it)

Here’s the Information on the Xyron and Graphic 45 Giveaway…

Xyron and Graphic 45 will be giving away a G45 Christmas paper pack and a Xyron Mega Runner to TWO lucky people. To enter  just post a comment on any of the G45 projects on the Xyron Facebook Page all this week.

Here’s the link to the Xyron Facebook Page.  Good Luck!

“This is a sponsored post.  As a member of the Xyron Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Shop Your Fav Brands at Scrapbook.com