Easy Photo Transfer Ornament

How to make a Photo Transfer Ornament for your Christmas Tree.

Our sweet little guy, Dexter, is turning one year old tomorrow.

And of course, this will be his very first Christmas.

I thought he needed his very own ornament on the tree.  He is family.

Materials Used:             (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!


  • Very Important… You must use a photocopy made from a dry toner type copier.  (Do not use the actual photograph, trust me, it will not work.)  Try your local office supply store that makes copies.
  • Lay the wood slice over the photocopy and trace around the wood slice.  Cut around the traced lines.

  • Carefully lift the image, making contact only slightly with the image edge. Flip the coated image over and position it over the wood slice.   Lightly press from the center out to release any air bubbles.   Wipe away any excess medium that may have been squeezed out.
  • Allow drying overnight.

  • Wet a sponge with water, squeeze excess water from the sponge then dampen the exposed backside of the image transfer. Immediately as the paper is wet, an image will appear. Allow the wet image to rest a couple of moments to soften the paper.
  •  Using your damp sponge or a fingertip, begin to lightly rub over the damp paper to peel away layers. Be careful not to be rough with the wet paper as it may be fragile. After removing several layers of paper, stop and allow the transferred image to dry. Once dry, white areas will appear where paper remains. Repeat steps to moisten and lightly rub the surface to remove the remaining paper layers. Allow to dry.

A little about Dexter…

We added Dexter to our family on Feb. 12th of this year.  (A slightly impulsive move.)

Dexter is a Shichon Teddy Bear Pup, which is a Bichon Frise, and a Shih Tzu mix.

He is the sweetest, softest, friendliest little dog I’ve ever known.

While Dexter isn’t technically a quarantine puppy, he sure has been a great distraction.

Because of him, I’ve been on more walks (at least once a day), met more neighbors,

and go outside more than ever before.  (He’s been good for us.)

I think more people in the neighborhood knows his name more than mine.

He’s been a great addition to our Family!

Amazon FreeTime Unlimited Free Trial 

How to Make Wood Slice Snowmen


What to do with a basket of Wood Slices*

This past summer, when my husband was trimming the old pine tree,

I asked him to save a few logs from the branches.

I wasn’t sure then what I was planning to make but I knew I wanted to save some just in case.


I asked my husband to cut wood slices out of the smaller logs using a circular saw.

If you don’t have access to a pine log or don’t feel like cutting Wood Slices*

you can also purchase them online.

For those of you who don’t want to cut your own Wood Slices*.

You can also find them online by clicking on the pictures↓.  (*affiliate link)


Make sure to double check sizes before ordering.


I picked out four wood slices of varying sizes.


I laid out the wood slices to determine placement of how I wanted them to go together.

I drilled small holes on the end of the wood slices with a fine drill bit approx. 1/4-1/2″ into the

end of the wood.


Using small dowel rods or bamboo skewers for reinforcement,  I inserted the rods into the

holes with a squirt of DecoArt Americana Wood Glue*.  (*affiliate link)

Each wood slice has a small wood dowel piece in between to hold the snowman together.


Once the wood slice snowman was completely dry and stable,

I drilled a hole in the center of the largest wood slice to use as my base.

The Snowman is attached to the base using a small dowel and wood glue*.


To decorate the snowman…

  • Cut a piece of flannel slightly larger than the area around the head.
  • Fold and glue a small cuff using Fabri-Tac Permanent Adhesive*.
  • Glue the ends of the flannel together to create a tall “tube”.
  • Glue tube onto the top of the Wood Slice Snowman’s head,
  • Tie the top of the tube with a piece of string or thread.
  • Trim and fringe the excess fabric on the top of the tube to make it look like a hat tassel.
  • Cut a longer 1″ wide piece of flannel to tie around the neck of the snowman.  Don’t forget to fringe the ends.


To make a Reindeer Wood Slice Ornament…

  1. Paint the center of the wood slice with black chalkboard paint.
  2. Paint the reindeer cut out with silver acrylic paint.
  3. Glue reindeer onto wood slice with quick dry glue.
  4. Glue glitter holly berries embellishment onto reindeer.
  5. I used a push pin to start a small hole on the end of the wood slice.
  6. Screw a loop screw into the hole and add a ribbon to hang.

For more Wood Slice Projects Click on the Pictures below.



Don’t Miss a Thing…Make Sure to Follow me

Disclaimer:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thank You.

Give the Gift of Amazon Prime*