Category: Ad

Plaid Tidings Embroidery Hoop Ornament

Leave a comment

Plaid Tidings Embroidery Hoop Ornament-Sue's Creative Workshop www.sueeldred.com 6361

How to make a Plaid Tidings Embroidery Hoop Ornament

I guess you might say I’ve gone a little overboard on the Buffalo Plaid this year.

How can I help myself, I just love it all.

I got a little inspired by a Christmas ad I saw for clothes and decided to make this ornament.

It’s another quick and easy Holiday Ornament to make.

A perfect little gift for your Plaid Loving friends like me.

Plaid Tidings Embroidery Hoop Ornament-Sue's Creative Workshop www.sueeldred.com 6340

Supplies Needed:                 (*affiliate link)

Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Plaid Tidings Embroidery Hoop Ornament-Sue's Creative Workshop-www.sueeldred.com 6353

Directions:

  • Paint the embroidery hoop with black acrylic paint.
  • Cut a piece of flannel that is larger than the hoop.
  • Arrange the Joy® Baby Monogram Embroidered Iron On Letters shiny side down onto the flannel and inside the hoop to make sure they fit.
  • Set iron to cotton setting, approx. 350° or follow fabric care label.
  • Cover letters with a fine cloth.  With firm pressure iron cloth over the letters for 25 seconds.
  • Turn flannel over and iron the back of the letters for 25 seconds.
  • Allow 1 minute to cool before handling.

Plaid Tidings Embroidery Hoop Ornament-Sue's Creative Workshop www.sueeldred.com 6354

  • Insert the flannel into the embroidery hoop and tighten.
  • Trim the excess flannel from around the embroidery hoop.
  • Glue pine craft stem around the outside edge of the hoop.
  • Embellish the hoop with ribbon and jingle bell.
  • Add a piece of red twine to hang.

You can find a wide selection of Joy® embroidered iron-on letters and alphabet sheets in different sizes at your local craft stores!

“This is a sponsored post.  As a member of the Joy® Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

How to make a Plaid Tidings Embroidery Hoop Ornament-Sue's Creative Workshop www.sueeldred.com

Give the Gift of Amazon Prime*

DIY Mini Ketchup Bottle Snow Globe from recycled materials

Leave a comment

Creating a Snow Globe from a Mini Ketchup Bottle

A little Holiday up-cycling project for my fellow collectors (aka savers).

When you order room service at some hotels you get these little glass condiment jars.

When my husband used to travel he’d occasional bring them home.  (I’ve trained him well.)

Add in a few miscellaneous supplies and I had the start of a cute little snow globe.

There are several options to use as a base.  Old hardware pieces, vintage Jello molds.

Materials Used:

Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

To Make the Mini Ketchup Bottle Snow Globe:

  • I gave the brass piece and the lid of the ketchup bottle a light sanding and sprayed it with Rust-Oleum Spray Paint in Colonial Red*.  (my favorite red)  It might take a couple coats.
  • This was the hard part for me.  Allow the paint to fully dry before handling.  (trust me)
  • Using Super Glue*, glue a small bottle brush Christmas tree (found at most craft stores) on the inside of the ketchup bottle lid.  Make sure that the base of the tree is not larger than the opening of the bottle.
  • Glue large flat button to the bottom of the jar.  (or is it the top of the snow globe) Glue a decorative button to the white button to add height and extra prettiness.
  • Add a small amount of white glitter or fake snow to your bottle and screw on the lid with Christmas tree.
  • Glue ketchup bottle lid to painted brass base using  Super Glue*
  • Wrap a Craft Pine Stem* around the neck of the bottle and glue in place.
  • Tie a ribbon around neck of bottle.
  • Glue small snowflake embellishment.

If you liked my Mini Ketchup Bottle Snow Globe check out my Christmas in a Pickle Jar.

    

Don’t Miss a Thing…Make Sure to Follow me

This Christmas Give the Gift of Amazon Prime*

Nick and Warren and the December Orange Art Box

Leave a comment

Nick and Warren and the December Orange Art Box

It’s always fun crafting with these two monkeys.  Always a lot of silliness and smiles.

When we finally got a chance to work on the December Box, I had picked them up right after

they got off the school bus.  They were especially wound up.

I had to threaten Warren that he couldn’t be in the video if he wouldn’t stop

talking about naked bellies and of course showing me.

Then once we got going he gave me a sweet little song included at the end of the video.

Another Bonus…

I get to give away a Orange Art Box to one lucky kid.  (details at the bottom of this post)

Please enjoy our cheesy little video.

The December Orange Art Box was all about “Artic Friends”.

The December Orange Art Box included modeling clay, markers, card kits, postcards, bookmarks, glue, yarn to make tassels, and an instruction book that show the kids how to draw and make the animals.

Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

All silliness aside the boys had a great time creating.  

If you have a creative kid in your life and are looking for a unique and special gift

this Holiday, you may want to look into the Orange Art Box a subscription Art Box for kids.

“This is a sponsored post.  I have been provided product in exchange for my creative ideas.  The views and opinions are my own.”

Always in my heart ❤️

Leave a comment

A Christmas Ornament with Special Meaning.

The holidays are especially hard for people who have lost loved ones.

The year I lost my Dad, right before Christmas, I found it really hard to celebrate.

I found myself just going through the motions.

This year, I decided to make a special ornament to place on my tree to remind me

that my loved ones will always be in my heart.

At Christmas Time and Every Day.

To make my ornament…

I used a simple whitewashed wood ornament that I picked up at Michael’s.

I cut the words “Always in my Heart” using my Silhouette Cameo Electronic Die Cutting Machine* out of matte black self adhesive vinyl from Styletech Craft.

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Directions:

  • Using an electronic die cutting machine, I cut the words.
  • Using a weeding tool carefully remove the negative spaces in and around the letters.
  • Place a piece of Vinyl Transfer Tape* over the letters.  Rub over the letters using a vinyl scraper tool to help the vinyl cling
  • Apply words onto the whitewashed wood heart.

A simple little ornament and a whole lot of love.

You can now find the full line of StyletechCraft online at ATSM.


“This is a sponsored post.  As a member of the StyleTechCraft Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Simple Country Christmas Vase

Leave a comment

Simple Country Christmas Vase

Create a sweet Country Christmas Vase with a little help using Joy Iron On Embroidered Letters.

Supplies Used:

Shop Your Fav Brands at Scrapbook.com

*Disclosure… This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Directions:

  1.  Spray the mason jar with a couple coats of ivory colored spray paint.

2.  After the paint has dried, lightly sand the jar to remove the paint off the letters.

3.   Drill a hole on the top of a small wood slice and paint the center with red acrylic paint.
4.  Glue the embroidered letters and wood star onto the wood slice with craft glue.
5.  Tie ribbon around the neck of the jar and add embellished wood slice.

You can find a wide selection of Joy® embroidered iron-on letters and alphabet sheets in different sizes at your local craft stores. 

“This is a sponsored post.  As a member of the Joy® Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Give the Gift of Amazon Prime*

The Gift of Organization

Leave a comment

The Gift of Organization

I’m a little bit of an Organization nut.

I like things to be neat and tidy. (I’m sure I’m not the only one.)

With the holidays around the corner, for that hard to buy person,

why not give the gift of organization.

I like to use the Deflecto Interlocking Single Tilt Bins* all around the house.

I figured everyone else might like them too.

You could give the bins as is or fill them up for the ultimate gift.

Add a bow and your set to go.

Here are a few ideas to get you started.

For the Kids

Craft supplies, playdoh, Legos, the list could go on and on.

Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

In the Bathroom

Hair ties, make up…Clear up the clutter on the bathroom counter.

In the Garage (or Mancave)

for the golfer in my life.

In the Baby’s Room

A great gift for the new mother.

In the Craft Room

The bins are interlocking and stackable.

Great for little storage needs in the garage, craft room, nursery, kitchen, and even the kid’s room.

Wherever you need a little extra storage.

The nice thing about the interlocking single tilt bins* is that you can use just one or use

several.  You can also hang them on the wall or use them with a mounting bar*.

Disclosure…“This is a sponsored post.  As a member of the Deflecto Design Team I have been provided compensation and product in exchange for my creative ideas.  The views and opinions are my own.

Give the Gift of Amazon Prime*

It’s Orange Friday!

Leave a comment

The boys always love receiving their Orange Art Box. 

It’s something we look forward to getting and working on together.  Because it’s FUN!

I wanted to share an opportunity for you to get an awesome deal on the Orange Art Box.

If you have a creative kid in your life, this will make a great Christmas present!  

*Ad Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Disclaimer:  “This is a sponsored post.  As a member of the Orange Art Box Makers I have been provided product in exchange for my creative ideas.  The views and opinions are my own.

A Merry Little Holiday House

Leave a comment

How to make A Merry Little Holiday House.

A cute little holiday decoration using the Eileen Hull House Ornament Die.

Perfect for gift giving.  Just add a small battery operated tea light and see it glow.

A Merry Little House Supplies Used:            (*affiliate links)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Directions:

  • Cut two pieces of Red and Black Buffalo Plaid paper 6″ x 8″.
  • Run both pieces of paper design side up through the Xyron Creative Station*.  As the paper moves through the Creative Station it adds adhesive to the underneath side of the paper.  You get full and complete adhesive covering on the paper.
  • Cut two pieces of Mat Board* 6″ x 8″.
  • Adhere the buffalo plaid paper onto each one of the mat board.  (underneath will be plain)

  • Lay covered matboard on top of the house ornament die and sandwich it between two sizzix cutting plates.  Run the die, mat board and cutting plates through the Big Shot Die Cutting Machine*.  The Big Shot will cut out the house shape and two tiny houses that you can use on a later project.
  • Cut two houses shapes.

A Merry Little Holiday House bits and pieces.

  • Carefully fold on the scored lines.
  • Cut off the top tab with the two holes on both houses.  (This tab is used if you want to make it an ornament.)
  • You will also need to cut the bottom flap from one of the houses.
  • Use Super Glue to assemble the house. Glue all sides of the house together before gluing the roof tabs.  Leave bottom tab unglued so that you can add a small battery operated tea light.

  • For the Roof:  Cut a piece of Black Corrugated paper 2 1/2″ x 4″.  Fold in half and glue to top of the roof.
  • Place two small pieces of white matboard over the window section of the ornament house die and run through the big shot die cutting machine.  Trim around matboard to create two small windows.  Glue windows frames onto house.

  • Add the “Merry” chipboard sticker from the Christmas Market Chipboard Accents to the front of the house.
  • Make wreath out of a 6″ piece of the craft pine stem.
  • Create a small bow from the red twine and glue onto front of wreath.
  • Glue wreath to front of the house.

Carta Bella Christmas Market Collection*  (available on Amazon)

Give the Gift of Amazon Prime*

Creating a Mini Thanksgiving Room

Leave a comment

Creating a Mini Thanksgiving Room…

Time to get your rooms ready for the Thanksgiving holiday.

I love making miniature rooms, especially for the Holidays.

I created this special little room for Xyron using the Xyron Creative Station*.

The Xyron Creative Station* is perfect for projects like this.  I wanted complete adhesive coverage on every corner and edge of the paper.  (No wrinkles, no bubbles, easy to use.)

Products Used:                                      ( *affiliate links)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

To make the Mini Thanksgiving Room…

  • Cut chipboard into 4 pieces:  9″x7 1/2″, 5 3/4″ x 9″ and two 5 3/4″ x 7 1/2″
  • Cut woodgrain paper just 6″ x 9 1/4″ and run it through the Xyron Creative station design side up.   As the paper runs through the machine it adds adhesive under the paper.
  • Adhere the paper to the chipboard.  I like to cut my paper slightly wider than I need so I can trim the edges with a craft knife.
  • Gently sand edges with a extra fine sanding block for the perfect edge.

  • I cut the patterned paper half the size of the other three chipboard pieces and added a 1/2″ strip of  woodgrain paper to cover the seam.  (it looks like chair rail)
  • Using the Creative Station makes quick work of covering the walls.

  • I covered the back of my room with coordinating paper and added small strips of paper on the inside and back corners for added support.  Run those strips through the Xyron Creative Station* as well.

  • I picked up some inexpensive Doll furniture* at Dollar Tree* and painted them with black spraypaint.
  • I gave them a light sanding after they were dry with a sanding block to smooth.

  • I created additional furniture by cutting small pieces of chipboard and adhering them together.  (simple building construction)
  • A couple coats of black paint to finish the job.

  • To Make the tablecloth…Run a piece of lace through the Xyron Creative Station* and adhere the lace to the top of the table.  Trim around the edges of the lace with scissors.
  • I created a small vase with playdoh and painted it with acrylic paint after it was completely dried.  I added craft glue inside my vase and inserted snippets of artificial flowers.
  • I added a platter of turkey on the table. (don’t tell anyone but mine’s really a chicken)

A small little handmade bench for extra seating.

A shelf on the wall with special pewter pieces.

And a cute Turkey Decoration on top the sideboard to make the room more festive.

Happy Thanksgiving!

“This is a sponsored post.  As a member of the Xyron Makers Program I have been provided product in exchange for my creative ideas.  The views and opinions are my own.

If you liked the Thanksgiving Room you’ll like the Christmas Magic Room I made last year.

Buffalo Plaid Potholders

Leave a comment

Crisp air, falling leaves, and a big pot of soup to warm you up…

Just a few of the reasons I love Fall.

So while you’re warming things up…

Warm up your plain potholder and add a little personality with Joy Iron-On Embroidered letters.

Supplies needed:

  • Joy Iron-On Embroidered Letters
  • Cotton Potholders
  • Iron
  • Pressing Cloth

Directions:

  1. Remove letters from the sheet.
  2. Position letters shiny side down on potholder.
  3. Cover letters with a clean cloth.
  4. With firm pressure iron cloth over the letters for 30 seconds.
  5. Turn potholder over and iron the reverse side for an additional 30 seconds.
  6. Allow to cool 1 minute before using.

 You can find a wide selection of Joy® embroidered iron-on letters and alphabet sheets in different sizes at your local craft stores!

“This is a sponsored post.  As a member of the Joy® Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Shop Your Fav Brands at Scrapbook.com

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!