Holiday Snow Globe Cards

Whether you like a classic style or cute, holiday snow globes are just fun.

Especially when they are made into cards that you can send.

For my cards, I used the Snow Globe stamp and die set from The Maker’s Movement

to make two snow globe cards with two different styles.

Both of these cards could also be made into a cute little shaker cards. 

Disclosure:  This is a sponsored post  for Maker’s Movement.  I have been provided product
and compensation in exchange for my creative ideas.  The view and opinions are my own.

Penguin Snow Globe Card

  • Stamp the penguin on watercolor paper with a black permanent ink pad.
  • Use markers, colored pencils, or watercolor to color in the image.
  • Use the coordinating die to cut out the penguin.
  • I like to use the Xyron Creative Station* to add adhesive onto my decorative scrapbook paper before die-cutting  fine detailed pieces. It makes adhering to detailed pieces like the snow globe outline so much easier to adhere to.
  • For the base of the snow globe.  I adhered a small piece of woodgrain scrapbook paper onto a small piece of double-sided adhesive craft foam.
  • Run the woodgrain/foam piece through the Crossover II die-cutting machine* to create a think foam base.
  • Add a couple of thin foam mounting squares* to the back of the penguin before adding him to the card.
  • Adhere all your pieces together and stamp a little greeting on the top of the card.

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links,  I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Supplies Used on Cards:       (*affiliate links)

Winter Wonderland Snow Globe Card

Create  the soft look of freshly fallen snow with this Winter  Wonderland Snow Globe.

I love how different this card is.  (can you tell it’s my favorite)

It’s made similar to the Penguin Snow Globe.  The two trees in the middle are popped up using

thin foam mounting squares* to give the forest dimension.

Spooky Scary Halloween Card

Open if You Dare!

Here’s a spooky card for all you Halloween Lovers.

If you love a card with dimension, this card has a lot of spooky goodness.

The Spooky Scary Halloween Card was made using the “Spooky Scary” stamp and die set from

The Maker’s Movement.

Disclosure:  This is a sponsored post.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own.

Materials Used:            (*affiliate link)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

My process for making cards sometimes changes as I sit down to create.  I was getting into this

one and decided to forgo all the step by step pictures.  Instead, I will give you lots of details.

Here’s one tip I highly suggest.  (Especially with the skeleton die.)

Run the white card-stock through the Xyron Create-A-Sticker Machine* before cutting out the

skeleton die.  The Xyron Create-A-Sticker Machine* puts adhesive on the back of the

card-stock, making the skeleton pieces stickers.  By making stickers, adhering the skeleton

to the coffin was so much easier than using liquid glue.

  • I cut a piece of double-sided adhesive foam large enough to cut the casket shape.  I adhered a piece of gray card-stock to one side of the foam before die-cutting.
  • To cut the casket shape.  Place the casket die on the foam and run it through the Crossover II Die-Cutting Machine.  Because the foam is so thick, you may want to run it back and forth a couple of times to make sure the die cuts entirely through the foam.
  • Another good tip…Use a black chisel tip paint marker* to color the sides of the craft foam.

  • The lid of the casket was made by sticking two pieces of black patterned scrapbook paper together and die-cutting the scrapbook paper with the casket die. (I used the Xyron Sticker Maker)
  • Adhere a piece of scrapbook paper onto a piece of adhesive foam.
  • Using the casket outline die, cut a casket outline from the foam. Stick the casket outline on the inside of the lid.
  • Fold two small pieces of paper to use as the hinges. Glue only the top and bottom of the hinges. Not on the side of the casket.

  • Before sticking the casket onto the layered card base, attach a thin black string onto the back of the casket.
  • If you don’t have black string, put a little black paint between your thumb and index finger and run the string through the paint.  Voila, black string.
  • Tie string around the casket to keep the lid closed.

Save

Save

Bloom with Grace Card

How to Make Soft and Delicate Looking Paper Roses…

Bloom with Grace…A sweet and simple card using the In Full Bloom Stamp & Die Set

from the Maker’s Movement and the Spring Farmhouse paper from Simple Stories.

A great card for feminine Birthdays or Graduations

or anytime you want to send a little encouragement.

Bloom with Grace Products Used:                                  (*affiliate link)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

To Create a Soft Realistic Looking Tea Rose…

  • Place the flower cut out on the craft molding mat*.  (approximately the thickness of a computer mouse pad)
  • Using a large ball stylus tool*, press down on the center of the shape until the paper starts to bow.  This helps the paper when you start to manipulate the shape.

  • Start at the outside end of the flower and use the reverse grip tweezers* to start slowly rolling the spiral.

  • When your finished rolling, glue the bottom tab to the rose shape to hold the flower in place.

  • Use the reverse grip tweezers* to grasp the side of the flower and roll it back to form the natural curve of a petal.

It’s really quick and easy to make these delicate looking roses.  

To finish the card…

  • Die-cut a  vase using the Spring Farmhouse scrapbook paper.
  • Assemble a card base using  coordinating decorative scrapbook paper.
  • Glue the small roses over the top of the vase.
  • Add stamped leaves and the die-cut words “bloom” .
  • Finish with a small cream tag with the words “with grace” stamped in green.

Maker's Movement

*FTC Disclosure… “This is a sponsored post.  I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.”

Save

Save

Some Bunny Loves You Spring Card

How to make a “Some Bunny Loves You” Spring Card

Send a little Love and Encouragement to someone special using the Some Bunny Loves You

Stamp and Die Set from The Maker’s Movement.

*FTC Disclosure… “This is a sponsored post.  I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.”

Supplies used to make the card:                                     (*affiliate links)

Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Directions:

  • Stamp the bunny image onto a 2″ x 3″ piece of white heavyweight acrylic paper.
  • Start coloring the edges of the bunny with the saddle brown marker and blend the colors together using the light sand marker.  ( Stamping on non-porous white card-stock helps the markers blend easier.)
  • Highlight the bunny cheeks and inside of the ears with the baby pink marker.

  • Stamp a “heart balloon” and “small banner” onto a piece of  “Sunday dress” (purple) scrapbook paper.  Stamp the word “hugs” in the center of the balloon.  Stamp the words “hopping you all the best” centered inside the banner.
  • Align stamped heart image with the heart die and cut using the Crossover II*.
  • Cut the banner image using scissors.
  • Cut a 2 ½” x 3 ½” piece of “baby bunnies” (small flowers) scrapbook paper.  Cut the top of the paper with the wavy die and the Crossover II*
  • Adhere the small flowers layer onto  a 3 ½” x 4 ¾” piece of “blue skies” scrapbook paper.

  • Cut a 2 ¾” x 3 ¾”striped layer and round the corners of the layer using a rounded corner punch*.  Adhere onto the small layer onto the previous layers.
  • Add 3-D foam mounting squares onto the back of the bunny and balloon and adhere to the front of the striped layer.  Adhere the small banner using the tape runner to the lower right section of the striped layer (overhanging the edge).
  • Glue small hearts onto the front of the card using craft glue.

  • Adhere the layers onto a thin turquoise layer and then onto a 4″ x 5 ¼” piece of “Sunday dress” (purple gingham) scrapbook paper.  Adhere onto a 4 ¼” x 5 ½” white card-stock card folded vertically.  Tie a sheer ribbon around the top of the card.

    

Crossover II Fabric & Paper Cutting System

Recently, I was asked by The Maker’s Movement to try out the Crossover II Fabric & Paper Cutting System* to see how I liked it.  (Always anxious to try something new, I quickly agreed.)

*Disclosure… “This is a sponsored post.  I have been provided product in exchange for my creative ideas.  The views and opinions are my own.”

The machine is compact and portable.  Easy to store and carry.

You can use the Crossover II* with thin metal paper dies, fabric dies and steel rule dies.

The Crossover II Fabric and Paper Cutting System*is similar to other manual cutting systems and uses a “sandwich” configuration with three plates.  (included with the machine)

  • White Base Plate
  • Metal Adapter Plate
  • Clear Top Plate

This is my favorite part of the machine, the adjustable rollers and pressure settings. 

This was the real game changer for me.

It adjusts for multiple layers and allows you to be able to cut a variety of thicknesses.

Not just for paper…

the Crossover II Fabric & Paper Cutting System* can cut fabric, faux leather, craft foam,

chipboard, felt and several other materials.

Here’s a quick little video showing the Crossover II Fabric & Paper Cutting System*in action.

Along with the Crossover II Fabric & Paper Cutting System* I received a few dies from

Maker’s Movement to play with as well.

I created this quick card using paper scraps from Graphic 45 and a combination of the dies

I received from The Maker’s Movement.   I love the tiny foliage stamp I used on the background.

It’s from the Hello Spring Collection.

I liked using the Crossover II Fabric & Paper Cutting System*especially it’s versatility.

A good little machine to have on hand.