No Sew Bunny Gnome

No-Sew Bunny Gnome made using the New Xyron Glue Gun.

This Bunny Gnome was made using a couple of inexpensive girl socks from Dollar Tree.

The instructions for the Bunny Gnome are very similar to how I made the Valentine Gnome.

I filled the bottom of the sock with 1/3 cup of rice and filled the rest with poly-fil.

The top of the sock was tied tight with a piece of string and I added a small dab of glue from

my New Xyron Glue Gun to secure it.  I added a faux fur beard, a sock hat with a little

poly-fil added for shape and cute little felt ears.

No-Sew Valentine Gnome.   (click on picture for tutorial)

The Gnome is ready for Spring with his cute little felt ears and felt flowers.

*Disclosure:  This blog post uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Xyron Mini Multi-Stick Glue Gun

Enabler Alert…

Xyron has come out with three New glue guns.  This one pictured above is what I used to create the No-Sew Bunny Gnome.  One of my favorite features is that you can add up to three glue sticks so that you don’t have to keep reloading while you work.  How cool is that?

 Disclosure:  “This is a sponsored post.  I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.”

Simple Spring Place Card

Simple Spring Place Card-Sue's Creative Workshop-www.sueeldred.com 3127

Add a little whimsy to your Spring Table with this cute little Bunny Place Card.

Simple Spring Place Card-Sue's Creative Workshop-www.sueeldred.com 3073

Make it personal, it’s fairly simple and very inexpensive to make. 

Simple Spring Place Card-Sue's Creative Workshop www.sueeldred.com 2903

For the Bunny Place Card…

I used inexpensive wood bunny cut-outs from Dollar Tree* and scrapbook paper.

Additional Materials Used:      (*affiliate links)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!’

Simple Spring Place Card-Sue's Creative Workshop www.sueeldred.com 2935

Directions:

  • First, you’ll need to add adhesive onto the back of the scrapbook paper. 
  • I like to use the Xyron Creative Station* to add adhesive to my paper. 
  • Put the paper design side up on the Xyron Creative Station* crank the handle to run the paper through the machine.  As it moves through the Xyron Creative Station it adds adhesive to the backside of the paper.  Easy to use and it doesn’t need any electricity.

Simple Spring Place Card-Sue's Creative Workshop www.sueeldred.com 2916

  • Lay wood piece onto scrapbook and give a gentle rub to make sure everything is stuck down.
  • Carefully cut around the shape with a craft knife.
  • Sand the rough cut edges of the shape with a sanding block*.  You can use an Emory board to get into small places to sand.

Simple Spring Place Card-Sue's Creative Workshop-www.sueeldred.com 3095

  • Tie a thin pink ribbon around the neck of the bunny.
  • Glue small flower embellishment over the knot of the ribbon.
  • Print names using a computer-generated font onto white cardstock.
  • Cut into strips and cut a small “v” notch out of one end to make a small banner.
  • Tuck and glue banner under the edge of the flower.
  • Glue a small white pompom for the bunny tail.

Simple Spring Place Card-Sue's Creative Workshop www.sueeldred.com 3979

To make my bunny stand, I used a small wood piece cut from an old scrabble tray and glued it

onto the back using Dap Rapid Ruse All Purpose Adhesive*.

(Alternative suggestions would be a small kids block.)

Simple Spring Place Card-Sue's Creative Workshop www.sueeldred.com 3077

Now you’re ready to set the table using your good dishes and let the party begin.

Personally…I always considered these red toile dishes my “good” dishes and I only used them

for Holidays.  Now, as I’ve gotten older, I’ve decided to use them every day.  

Flower Garden Notecard Folio

Flower Garden Notecard Folio-Sue's Creative Workshop www.sueeldred.com 3854

How to Create a Flower Garden Notecard Folio

To Celebrate Spring and all things Flowers, I decided to make a Notecard Folio using paper from

Carta Bella’s Flower Garden Collection and Eileen Hull’s New Folio Journal Die from Sizzix*.  

      NEW Folio Journal at Sizzix

Materials Used:         (*Affiliate Links)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Flower Garden Notecard Folio-Sue's Creative Workshop www.sueeldred.com 3858

Album Details:

  • The album pieces are die-cut using Sizzix White Matboard Sheets*, which is the perfect size for cutting long pieces.  (You will need to cut the album pieces twice.)
  • There is a smaller rectangle die-cut piece that comes with the die. (cut two)  You will use the piece to create a pocket with the outer flap.  
  • Align and adhere both ends of the spine together using Tear It! Double-Sided Crafter’s Tape*.
  • Cover the front and inside of the album with decorative scrapbook paper.  (see album making tip below)
  • Album Making Tip:  I use my Xyron Creative Station* to add adhesive to my paper before sticking it onto the matboard.  It adds a complete adhesive layer with puckering or wrinkles.
  • Using a craft knife and cutting mat, I cut both ends of the flaps down to create 2 1/2″ pockets.  Adhere the “pocket pieces” (the small scored pieces that come with the die) to finish the bottom of the pockets.
  • I used Carta Bella Farmhouse Market Collections Stickers* to embellish the pocket fronts.

Flower Garden Notecard Folio-Sue's Creative Workshop www.sueeldred.com 3782

  • Create simple 3 1/2″ x 4 1/2″  layered cards using the Carta Bella Flower Garden:  3″ x 4″ Journaling Cards*.
  • After using one of the Journaling Cards for my front and back cover and another section for my green spine, I was able to create 8 small notecards to fill my notecard folio.  

Flower Garden Notecard Folio-Sue's Creative Workshop www.sueeldred.com 3898

  • The ribbon was added around the album before adding the front and back cover.
  • I created a small chipboard tag for the spine and punched the holes using a Crop-A-Dile Power Punch*.  
  • On the inside center binding, I hung a pen on the loop of ribbon that was added for the tag.

Flower Garden Notecard Folio-Sue's Creative Workshop www.sueeldred.com 3816

Wouldn’t this make a nice Birthday or Mother’s gift for someone special?

How to make a Ribbon Flower Wreath

Learn how to create ribbon flowers to embellish a small 6″ grapevine wreath.  

A great little Spring decoration.

Ribbon Flowers looks great on bags, gifts, wedding decorations and hair accessories.

How to make a Ribbon Flower Wreath-Sue's Creative Workshop www.sueeldred.com 8744

to make the Ribbon Flower Wreath you’ll need:

Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to make a Ribbon Flower Wreath:

  • Cut a 6″ piece of ribbon.
  • Use the ink applicator to apply purple ink to one edge of the ribbon.

Ribbon Flower Wreath-Sue's Creative Workshop-www.sueeldred.com 8754

  • create a running stitch down one side of the ribbon.

Ribbon Flower Wreath-Sue's Creative Workshop www.sueeldred.com 8761

  • gather the ribbon and tie thread ends in a knot.

How to make a Ribbon Flower Wreath-Sue's Creative Workshop www.sueeldred.com 8770

  • glue small vintage button to the center of the flower.
  • to create leaves:  fold a small strip of green ribbon and glue to the back of the flower.

How to make a Ribbon Flower Wreath-Sue's Creative Workshop www.sueeldred.com 8784

  • Glue flowers onto wreath.
  • Optional:  Glue small sprigs of flowers on each end of the ribbon flowers.

Did you notice?  I used the Deflecto Ribbon Dispenser* to organize and hold my ribbon.

The Deflecto Ribbon Dispenser* also fits into the Deflecto Stackable Caddy Organizer*

Hang your small wreath on a doorknob or decorative window and Enjoy.

“This is a sponsored post. As a member of the Deflecto Design Team I have been provided product in exchange for my creative ideas, views and opinions.”

Let’s Go Fly a Kite

Let’s Go Fly a Kite…

I’m so happy that Spring is finally here.

I’m ready to celebrate Spring with beautiful sunny skies and just enough breeze to fly a kite.

If you’re not into flying kites, you could always make a fabric one to hang up on the wall.

Kite Wall Hanging                                   (*affiliate link)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to make a Kite Wall Hanging:

  • Creating a kite pattern… Cut the white cardstock to 9″ x 12″.  Fold the cardstock in 1/2 lengthways.  On the two long sides make a mark at 4″.
  • For the top of the kite, draw a line from the top middle fold to the 4″ mark on each side.  For the bottom of the kite, draw a line from the 4″ mark to the bottom middle folds.
  • Cut out Kite pattern.
  • Trace and cut out the kite pattern on the backsides of both of the printed fabrics and the white felt.

  • Sandwich the white felt between the two patterned pieces .  Pin into place and top stitch around the kite.
  • Arrange the words “Lets go fly a kite” onto the front of the kite with the shiny side down.
  • Cover with soft clean cloth and iron on cotton settings for 30 seconds.  Turn kite over and repeat for an additional 30 seconds.

  • Cut the top flower and leaves off the floral applique.
  • Arrange the flowers on the kite and iron onto the kite the same way as the letters.
  • Glue rick rack around the edge of the kite.

  • Cut strips of fabric and tie onto a 14″ piece of twine.  Glue one end of the twine to the backside of the kite.
  • Make a small loop with a second piece of twine and glue to the top of the kite.

“This is a sponsored post.  As a member of the Joy® Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

   

Don’t Miss a Thing…Make Sure to Follow me