Creating a Mini Thanksgiving Room

Creating a Mini Thanksgiving Room…

Time to get your rooms ready for the Thanksgiving holiday.

I love making miniature rooms, especially for the Holidays.

I created this special little room for Xyron using the Xyron Creative Station*.

The Xyron Creative Station* is perfect for projects like this.  I wanted complete adhesive coverage on every corner and edge of the paper.  (No wrinkles, no bubbles, easy to use.)

Products Used:                                      ( *affiliate links)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

To make the Mini Thanksgiving Room…

  • Cut chipboard into 4 pieces:  9″x7 1/2″, 5 3/4″ x 9″ and two 5 3/4″ x 7 1/2″
  • Cut woodgrain paper just 6″ x 9 1/4″ and run it through the Xyron Creative station design side up.   As the paper runs through the machine it adds adhesive under the paper.
  • Adhere the paper to the chipboard.  I like to cut my paper slightly wider than I need so I can trim the edges with a craft knife.
  • Gently sand edges with a extra fine sanding block for the perfect edge.

  • I cut the patterned paper half the size of the other three chipboard pieces and added a 1/2″ strip of  woodgrain paper to cover the seam.  (it looks like chair rail)
  • Using the Creative Station makes quick work of covering the walls.

  • I covered the back of my room with coordinating paper and added small strips of paper on the inside and back corners for added support.  Run those strips through the Xyron Creative Station* as well.

  • I picked up some inexpensive Doll furniture* at Dollar Tree* and painted them with black spraypaint.
  • I gave them a light sanding after they were dry with a sanding block to smooth.

  • I created additional furniture by cutting small pieces of chipboard and adhering them together.  (simple building construction)
  • A couple coats of black paint to finish the job.

  • To Make the tablecloth…Run a piece of lace through the Xyron Creative Station* and adhere the lace to the top of the table.  Trim around the edges of the lace with scissors.
  • I created a small vase with playdoh and painted it with acrylic paint after it was completely dried.  I added craft glue inside my vase and inserted snippets of artificial flowers.
  • I added a platter of turkey on the table. (don’t tell anyone but mine’s really a chicken)

A small little handmade bench for extra seating.

A shelf on the wall with special pewter pieces.

And a cute Turkey Decoration on top the sideboard to make the room more festive.

Happy Thanksgiving!

“This is a sponsored post.  As a member of the Xyron Makers Program I have been provided product in exchange for my creative ideas.  The views and opinions are my own.

If you liked the Thanksgiving Room you’ll like the Christmas Magic Room I made last year.

A Plate Full of Thanks

This month I started working with a company called Tape Technologies, the maker of

Styletch Vinyl, as their New Design Team Coordinator.

Being that it’s November…

I decided my first project should be something that I could use for Thanksgiving.

I perused my new collection of 12″ x 12″ adhesive vinyl and decided on the Sunflower

Transparent Glitter Vinyl sheet.  (fyi…Styletech has a great selection of vinyl to work with.)

You can find a 10 assorted pack of 12×12 Glitter Self Adhesive Vinyl Sheets* on Amazon.

Some of you may gasp…

when I tell you that I still don’t have one of those fancy electronic die cutting machines.

(although it may be on this year’s Christmas list)

To begin this simple project…  I cut the word “Thanks” using a thin steel die and my

Sizzix Big Shot Die-Cutting/Embossing Machine*.  I cut out 8 for my large plate and

one for my small plate.  Because I only wanted the “thanks” around the edge of the plate

I cut the flourish off the bottom of the “k”.

After figuring out my plate placement, I placed my die-cut “thanks” onto a flat surface and

picked up the die-cut with my Vinyl Transfer Tape*.

Once on the transfer paper I peeled back the protective layer and secured it in place on my

plate.  I burnished the transferred die and removed the transfer paper.

Because I couldn’t help myself I added another die cut “Thanks” with the flourish in tack onto

a cute little thrift store find.

FYI…While I would not place the plates in the dishwasher, I did try to see how it would hold up to hand-washing.   It did fine.

Shop Amazon Scrapbooking Supplies*

*Disclaimer:  This post is sponsored by Tape Technologies and uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Give Thanks with a Grateful Heart

Deflecto Give Thanks Acrylic Frame

Give Thanks with a Grateful Heart. 

Powerful Words, Great Advice.

Words I need to be reminded of everyday, not just at Thanksgiving time.

As a gift for you, I created the below graphic using Picmonkey, a free photo editing site,

with no watermark so that you can save it onto your computer.

I printed the below image out as a 5″ x 7″ photo and put it in one of the Beveled Edged Craft Frames

that I received from Deflecto Craft Solutions.

Enjoy!

Give Thanks 2

“This is a sponsored post. As a member of the Deflecto Design Team I have been provided product in exchange for my creative ideas, views and opinions.”