A Welcome Home Card

Home is the place where you belong.

As we stay home and shelter in place, home becomes such so much more.

A safe haven, a place to work, a place to play, and a place to be.

I can’t wait until the day when I can welcome friends and family back into my home.

I can’t wait to hug my kids and grandsons.

Whatever your meaning of home, I hope you like this Welcome Home card made with

the Welcome Home Stamp and Die Set from the Maker’s Movement.

This heartfelt set is perfect for a new baby, housewarming, homecoming, and more.

The Welcome Home Card was made using the Gingham Garden paper collection from My Mind’s Eye and various metal dies from The Maker’s Movement.

Crafter Tip:  The metal dies in the kit are all connected when you get them. One of the first things I do when I start snipping the dies apart is to cut a piece of thin Magnetic Craft Sheet* and adhere it to the packaging.  It’s a great place to put your small dies so you won’t lose them.

Supplies Used:           (*affiliate link)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

This is a breakdown of all the die cut and stamped pieces used to create the house.

  • The shutters were made by stamping two additional doors and cutting the bottom panel from the left side of the door.  (the right side has the door knob, and I didn’t want to include that)

  • The bushes were made using the small cloud die.
  • For added dimension, the clouds were popped up using thin foam mounting squares.

*FTC Disclosure… “This is a sponsored post for The Maker’s Movement.  I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.”

Sew Simple Fall Welcome Banner

Sew Simple Fall Welcome Banner…

Welcome your guests all season long with this easy to make Fall Welcome Banner.

To make the Fall Welcome Banner you’ll need:

  • Two pieces of 8″ x 12″ plaid flannel
  • JoyⓇ Gold Iron-on Embroidered Letters
  • Felt:  Cream, Green and Tan
  • Beacon Fabri-Tac Permanent Adhesive*
  • Various Trims and Buttons
  • Sewing Machine
  • Iron
  • Bamboo Skewer

Directions:

  • Cut simple pumpkin shape out of cream felt.  You can find several simple pumpkin images online that you can trace onto the felt.
  • Cut a pumpkin stem from tan felt and leaves from green felt.
  • Glue shapes and trim onto flannel with fabric glue*.

    • Top stitch around pumpkin and trims on flannel using the sewing machine.

    •  Place second piece of flannel over the decorated piece and sew together leaving space for turning the right side out.  Sew banner closed.
    • Set iron to cotton setting, approx. 350°.
    • Iron banner to flatten.
    • Position letters with shiny side down onto flannel.
    • Cover letters with a clean soft cloths, with a firm pressure iron cloth over letters for 25 seconds.
    • Turn flannel over and iron the back of the letters for 25 seconds.
    • Create a small pocket by folding and sewing down top of banner.
    • Insert a bamboo skewer or small wood dowel on top of banner for hanging.

Joy® iron-on, embroidered letters and number sheets are available in a variety of sizes, colors, and fonts at your local craft stores.

“This is a sponsored post.  As a member of the Joy® Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Shop Your Fav Brands at Scrapbook.com

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to make a Patriotic Red, White and Blue Etched Wine Bottle

Celebrate the holidays with a Red, White and Blue Etched Wine Bottle.

I’m getting ready for a Americana Crafternoon this week-end with a fun group of ladies

and thought I’d make up a few decorations.  As luck would have it, I just happened to

have an empty blue wine bottle.   I thought to myself, that would make a perfect vase.

I added red flowers to a 50 cent Garage Sale-Flag Basket and now I have a festive display.

Shop Dollar Tree for Red White & Blue Party Supplies*                      (*affiliate link)

To make the Red, White and Blue Etched Wine Bottle I used…             (*amazon affiliate links)

Directions:

  1.  Clean and remove the label off a blue glass wine bottle with warm soapy water.  (Dry)

 

2.  Mask off a 2 ½ to 3 inch section on the center of the wine bottle with blue painter’s tape.  Burnish the edges of the tape with your fingertip, the tape should lay flat against the bottle.

3.  Punch stars out of the etchall etchmask* Remove backing from the stars and stick randomly on the bottle.  Burnish the stars with your fingertips onto the bottle.

4.  Apply a heavy coat of etchall Etching Crème*   onto the bottle using the squeegee.

5.  Let crème sit for 15 minutes.  (You will need to keep an eye on the bottle to make sure etching crème doesn’t run past the blue painter’s tape.)  Scrape excess etching crème from the bottle and return the extra etching crème back into the bottle. It’s reusable.

6.  Rinse bottle with warm water to clean.  Remember to keep crème away from porcelain or ceramic tiles.  Remove tape and stars and dry.  The bottle will have a nice subtle etching.

7.  While I liked the subtle look… I decided I wanted something a little bit brighter for my patriotic bottle.   I dried brushed white acrylic paint over the etched surface.  Wipe off excess paint with a damp cloth for a white washed look.  The paint only sticks to the etched surface.  (How cool it that.)  It really makes the stars pop.

8.  Re-mask the bottle with the blue painter’s tape, this time covering the etched surface.  Paint the bottom of the bottle with the colonial red spray paint.

10.  Mask a small section on the top of the bottle and spray with gold spray paint.

11.  Cut a small black vinyl rectangle and round two of the corners with the corner punch.

12.  Stencil the word “welcome” from the family words stencil onto the black vinyl using a stencil brush and the multi-surface acrylic paint.

13.  Use the gold paint pen to add a thin border around the black vinyl tag.  Punch a small hole on the top of the tag and tie onto the neck of the bottle with ribbon.

Enjoy the party with friends.  (maybe even empty another blue wine bottle)

      

Don’t Miss a Thing…Make Sure to Follow me.

Shop Your Fav Brands at Scrapbook.com

Disclaimer:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!