Category: Blog Hops

Crazy Quilt Card

2 Comments

Crazy Quilt Card 2

I am fascinated by quilts.  Old ones, new ones, it doesn’t matter…

I love all the colors and patterns.

I once thought I might enjoy making a quilt.

But… I knew I’d never have the patience to finish the job.  (So I quit before I even started.)

Crafter's Ink 87508-Canyon

I recently received some new stamps and inkpads from Ann Butler Designs and

Clearsnap to use for a Blog Hop with a few other designers.

The stamps I received are quilt themed stamps and the Crafter’s ink is perfect for fabric, wood and

more.  Being a paper crafter… my first thought was a quilt card.  (Now that’s a quilt I can make.)

Crazy quilt card Collage

Quilt Card Supplies Used:

  • ColorBox® Background Basics by Ann Butler  Basket 1 and Picnic 1
  • ColorBox Crafter’s® by Ann Butler Canyon, Ocean Breeze, Desert Sand, Evergreen, Deep Woods
  • Blender Basics Paper Pack from Adorn It

Here’s how I made the card:

  1. Cut 1″ squares from the pre-stamped colored paper.  Make extra so that some of them can be cut in 1/2 diagonally.  I stamped the “basket” stamp several times on a 5 1/2″ x 5 1/2″ piece of paper to create my background piece.
  2. I made a 5″ x 5″ scored grid to glue my 1″ squares on.  You don’t necessarily need to make a grid; you could actually glue it right onto the background piece.  I found it easier to arrange and re-arrange my squares on the grid before gluing.   It also helped me keep the squares straight when gluing.
  3. Once pattern is glued down, create secondary pattern by adding cut 1/2″ squares.
  4. Adhere quilt card onto 5 1/2″ stamped square and additional layers.  Finished card is 6″ x 6″.

Shop Amazon Scrapbooking Supplies*

Disclaimer:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

More Eco Friendly Projects

Leave a comment

Walnut hollow earth day hop

My project yesterday was part of a Blog Hop sponsored by Walnut Hollow and Kunin Group.

Our teams are sharing projects that pair both Kunin Group felt and Walnut Hollow wood products to create practical and beautiful home decor, organizing solutions, and entertaining items. You can make these projects all year long, not just for Earth Day. To see more inspiring projects, continue on the hop using the list below:

Walnut Hollow

Kunin Group Felt

Sue Eldred  (that’s ME!)

Beth Watson

Debra Quartermain

Sabrina Alery

Abby Davis

Jennifer Priest

Marilyn Gossett

Laura Kelly

Steph Ackerman

Laura Bray

walnut hollow earth widget

Eco Friendly Projects with Walnut Hollow and Kunin Felt

18 Comments

Eco Friendly Projects with Walnut Hollow and Kunin Felts

Today, I’ve teamed up with Walnut Hollow and Kunin Felt, both eco friendly companies,

with some fun projects for Spring.

For my projects I used Walnut Hollow’s:     (*affiliate links)

Earth Day Step Out Collage

Earth Day Projects Collage

Walnut Hollow Earth Day Project 04385

I added Eco-Friendly tableware consisting of Bio-degradable cutlery and Bamboo plates.

Did you know?

Walnut Hollow has always been a huge advocate of environmental sustainability within the art, craft and hobby industry. Walnut Hollow has a strong commitment to environmental initiatives by preserving natural resources through their raw material consumption practices, production processes and recycling activities as well as maintaining an active involvement in the community.

Kunin Felt is made from Eco-fi,® a high-quality fiber made from 100% post-consumer recycled and BPA-free plastic bottles.

Earth Day is April 22nd.  Let’s make a difference.

Disclaimer:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Join Amazon Kindle Unlimited 30-Day Free Trial

Simply Beautiful Handmade Flower

5 Comments

Learn how to make a Simply Beautiful Handmade Flower in a few easy steps.

To make the flower you’ll need:      (*affiliate link)

Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Directions:

  1. Punch 3 daisies from each one of the punches for a total of 12 punch outs.
  2. Using the end of a pencil or skewer, round each of the petals up.
  3. Turn the punched shaped over and press down into the center.
  4. Glue two of the largest flowers together slightly off centered.  Add the third flower.
  5. Continue adding and gluing the next size flower and glue on top.  Repeat with the third size.
  6. Pinch the smallest flowers up tight and stagger and glue onto the center of the flower.
  7. Spray the finished flower with Glimmer Mist until you get the desired shade of color.
  8. Once the flower is dry add a small adhesive pearl in the center of the flower.
  9. Create card using Captivating Squares shapes and layers misted with Glimmer Mist

*FTC Disclosure… “This is a sponsored post.  I have been provided product in exchange for my creative ideas.  The views and opinions are my own.”

Spring Bling for your Garden

4 Comments

Spring Bling for your Garden 3640

Add a little Spring Bling to plain boring terra cotta pots.

With Spring Fever setting in, I decided I needed a new flower to perk up the place.

I chose a pretty little African Violet that reminds me of my grandma.

Grandma loved African Violets.

In no time at all, armed with a few simple products, I transformed a boring terra cotta pot into

something sparkly and fun.  Just what I needed.

Spring Bling 3596

 To make my Spring Bling Pot you’ll need:      (*affiliate links)

  1. Start with a 4 1/2″ Terra Cotta Pot painted with black acrylic paint.
  2. Cut Black Damask tissue paper the width of the lower portion of the pot.  Cut the strip into smaller sections.  (my sections were 2 3/4″ x 1 1/2″)
  3. Apply a thin layer of Mod Podge to a small section of the pot, add tissue paper and apply another layer of Mod Podge over tissue.
  4. Continue adding tissue sections until the bottom of the pot is covered.
  5. Apply a thin layer of Mod Podge over the top of the pot to give it a nice shiny finish.
  6. Cut a strip from the Black Crystal Sheet to fit around the rim of the pot.
  7. Glue crystal sheet onto rim of the pot.
  8. Glue vintage button over seam for added sparkle.
  • FYI:  I could have used the Weldbond glue shown in the picture above which is a good permanent glue.  But, because of the weight of the crystals I decided to use my Quick Grip glue instead.

Spring Bling 3606  Spring Bling 3607

My Spring Bling Pot was created for and sponsored by Connie Crystal.

connie crystal logo

Disclosure:  I am an Amazon Affiliate.  If you chose to make a purchase using one of the links, I receive a small commission that helps offset the cost of running this blog.  Thanks for your support!

ADORNit Blog Hop and Giveaway

9 Comments

Have you seen ADORNit’s Art Play Paintables Collection by Lindsay Ostrom?

These papers are a card makers dream.

All these wonderful images without having to buy a ton of stamps.

The papers are perfect for coloring with color pencils, markers or painting

with water colors or inks.

I like to watercolor with my inks and markers and a waterbrush.

If my inks have a flexible lid, I squeeze color into the lid and use that as my palette.

If not, I dab the ink onto a non-porous surface and paint away.

(These cards were created for and sponsored by Adorn It.)

How to Make a Snowflake Hair Bow

5 Comments

Snowflake Bow 2047

To make my Snowflake Hair Bow you’ll need:

Snowflake Box Supplies

Supplies Needed:

Putting together the pieces 2070

Directions:

  1. Cut four 4″ pieces of 7/8″ Tranquil Blue Ribbon and four 4″ pieces of the Arabesque Ribbon.
  2. Remove wire from the Arabesque ribbon.  (white sheer)
  3. Cut four 3 1/2″ pieces of 3/8″ Tranquil Blue Ribbon and four 3 1/2″ pieces of Navy Satin.
  4. Thread needle and thread, tie with a knot leaving a long tail.
  5. Lay the 4″ white sheer ribbon over the 7/8″ Tranquil Blue Ribbon, fold the ribbon in half and stitch together with a simple running stitch.
  6. Lay the 3 1/2″ Navy Ribbon over the 3/8″ Tranquil Blue ribbon, fold the ribbon in half and add with a simple running stitch to the first section of ribbon.
  7. Continue stitching ribbon sections together.  (as shown in the picture above)
  8. Gather both ends of the thread, pull the ribbon together and tie with a knot.
  9. Cut eight 4″ of Arabesque sheer ribbon.  Remove wire from ribbon.
  10. Stitch ribbon together like in previous steps.  (see steps 6-8)
  11. Glue the two ribbon sections together with Fabri Tac glue.  (see picture below)
  12. Lightly apply blue ink onto white snowflake brad.  Wipe off excess ink.
  13. Remove prongs from the back of the snowflake brad and glue onto the white button.
  14. Glue button to the center of the bow.
  15. Glue or sew bow onto the metal barrette base.

Putting the pieces together 2038

Offray Logo

I would like to thank Offray Ribbon for generously providing the ribbon used in this project.

This project uses Amazon Affiliate links.  If you choose to purchase an item from Amazon from this link, I receive a small commission that helps defray the cost of running this blog.

a little Christmas Home Décor

2 Comments

Stenciled Burlap Outside

This Christmas has been the year of Holiday Stenciling for me.  (I just can’t seem to get enough)

This time I’m making a Quick & Easy Home Décor piece for a Blog Hop with Fairfield World

using Foamology Stickybase Tiles™.

What’s Foamology?

Well…. I could try to explain this cool product to you, but. this video explains it much better.

For my project, I decided to try my hand at stenciling on Burlap.

I used a large piece of burlap about 14″ wide and the 12″ Christmas Bulbs stencil

and the 12″ Word Xmas Tree stencil from Clear Scraps.

After I stenciled on the burlap, I wrapped it around the 12″ foam square as shown in the

video and inserted it into a shadow box frame.

Stenciled Burlap

Some of the products used on this project were generously donated by Fairfield World and Clear Scraps.

Upcycled Jewelry, Bags, Belts and more.

1 Comment

I was recently asked by Linda Peterson and Cisco Books to review Linda’s latest book

Upcycled Jewelry, Bags, Belts and More.

As soon as I received the book, I immediately sat down and thumbed through all the pages.

I was amazed at the unique and creative ways that Linda uses everyday found objects.

Have you figured out what she used to make the belt on the front cover?

Soda Can Tabs!

Linda has added beautiful, detailed pictures with easy to follow instructions that makes

recreating these projects a breeze.  If you enjoy Indie crafts and up-cycling everyday

found objects then I highly recommend this book.

Handmade Holiday: Sew Simple Snowflake Pillow

1 Comment

One of my favorite things to do during the holidays (besides eating Christmas cookies)

is to make things to decorate my home.  My snowflake pillow is a simple sewing project

that makes a warm and cozy winter accent.

You can leave this pillow out long after the holidays are over.

For my Snowflake Pillow I used:                     (*affiliate link)

Directions:

  1. Cut a 4″ x 12″ wavy piece from the cream felt.
  2. Add a small amount of Fabri Tac Glue on the back of the cream felt to keep it in place before sewing.  Place that piece 1/2″ up from the bottom of the grey 13″ piece of felt.
  3. Glue Snowflakes in place.  Hand sew the red buttons in the center.
  4. Machine sew around outer edges of the large cream piece.
  5. Machine sew between each of the snowflake arms.
  6. Turn felt pieces right sides together and sew with a 1/2″ seam allowance.
  7. Leave a 3″ opening at the bottom to add fiberfill.
  8. Turn pillow back around and stuff with fiberfill.
  9. Hand sew the pillow closed.

FYI…You can find die cut snowflakes in my Etsy Shop.

Thanks to the generous folks at Fairfield World for supplying the Poly-Fil.

*Disclaimer:  This post uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Try Amazon Prime 30-Day Free Trial