Mini Donut Box Gift Card Holder

How to Make a Mini Donut Box Gift Card Holder.

How to Make a Sweet Mini Donut Box Gift Card Holder

using the Donut Box Die Set from The Maker’s Movement.

The perfect gift card/money holder for that special someone with a sweet tooth.

Maker's Movement

Disclosure:  This is a sponsored post  for the Maker’s Movement.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own.   

How to Make a Mini Donut Box Gift Card Holder.

Materials Used:             (*affiliate links)

Shop Tombow

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!
Mini Donut Box Gift Box Holder

Directions:

  • Cut the Donut Box using the Crossover II Die-Cut Machine and the Donut Box Die Set.
  • Cut two scalloped rectangles using the Donut Box Die Set.  I like to run the paper through the Xyron Create-A Sticker Mini to add adhesive to the back of it before die-cutting.  It makes the scalloped rectangle a sticker which makes it so much easier to adhere to the box.
  • Remove the protective coating off of the acetate and adhere to the backside of the box opening.
  • Remove the backing off the “rectangle sticker” and place one on the front of the opening and the second onto the back of the opening.
  • Cut a small piece of acetate slightly larger than the opening on the Donut Box.
  • Gently fold Donut Box on the score lines.  Glue the side tabs together to form the box.

How to Make a Mini Donut Box Gift Card Holder

  • Cut the donuts out of cardstock.
  • Use the light tan Tombow Maker* around the edges of the Donuts to give them a “baked” look.

How to Make a Mini Donut Box Gift Card Holder

  • Place the “sprinkles” paper into the Xyron Create-A-Sticker Mini* design side up.
  • Turn the knob of the machine to run the paper through it.  As it goes through the machine it adds a layer of adhesive to the paper.

How to Make a Mini Donut Box Gift Card Holder

  • Cut the “icing for the donuts” out of the “sprinkles” paper and place it onto the cardstock donuts.
  • Cut a small 2 1/4″ x 3 1/2″ rectangle tray to fit inside the donut box.
  • Add thin 3D foam squares to the back of the donuts and stick them onto the tray.
  • I added two braided loops and taped them under the tray with regular tape.  I cut a second 2 1/4″ x 3 1/2″ piece of decorative scrapbook paper and adhered it under the donut box tray with the thin 3D foam squares.

How to Make a Mini Donut Box Gift Card Holder.

  • Cut a small tag using the tag die that comes with the Donut Box Die Set.
  • Cut two small flowers and two leaves using the Petite Flowers Die Set.  Add pink to the edges of the flowers using the #800 Pink Tombow Marker.
  • Carefully scrunch the flower with your fingers to give the flower shape.
  • Glue the flowers and leaves together onto the tag.

How to Make a Mini Donut Box

The Donuts look good enough to eat.

How to Make a Mini Donut Box Gift Card Holder.

Hide a gift card to your favorite donut shop or money under the donut tray for a sweet little surpris

Winter Fun Folio Album

The Winter Fun Folio Album made using Eileen Hull’s New Folio Journal Die from Sizzix*

and the Carta Bella Paper Company Winter Market Collection*.

Hi Everyone!

Today, I’m participating with Eileen Hull and Teams for a Chapter 1 Release Party Blog Hop using

the New Folio Journal Die*.  Just wait till you see all of the fun options the New Folio Journal Die* has in store for you!

Here is my Album using the New Folio Journal Die*

It is a fun Winter Themed album with four smaller albums tucked inside.

It’s the perfect album for adding little nooks and crannies.  This album was fun to make.

I even added an Antique Bronze Hasp Latch Hook* to keep everything securely in place.

For fun, I will be giving my album away to one lucky commenter.

(Information on the Hop and chances to win prizes at the bottom of the post.)

Materials Used:   (*affiliate links)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Album Details:

  • The album pieces are die-cut using Sizzix White Matboard Sheets*, which is the perfect size for cutting long pieces.  (You will need to cut the album pieces twice.)
  • Before I assembled my album, I painted both sides of the album pieces with DecoArt Multi-Surface Acrylic Paint in Night Sky.
  • The two smaller rectangle die-cut pieces shown in the bottom right corner of the picture comes with the die. They are used for creating pockets with the outer flaps.  I painted them dark blue as well.

Album Making Tip:  I like to use my Xyron Creative Station* to add adhesive to my paper before sticking it onto the matboard.  It adds a complete adhesive layer with puckering or wrinkles.

Here’s a picture of the album when it’s open.

  • On one end, I left the flap in tack, I use it to corral the mini-albums in the center of the spine.
  • On the other end, I cut the flap down and created a pocket to hold a small removable album.
  • I used Rapid Fuse Adhesive* with the matboard to adhere to the pocket pieces. It not only dries extremely fast, but it holds well too.

(I apologize, there are too many details to write a full tutorial on the album.)

  • I used Blue and White Twine to attach the three small albums to the spine.

  • Each little album has several blank pages to add pictures and journaling.

Here is a close up picture of the back pocket. 

The Mini-Album easily slips in and out of the pocket.

There is plenty of room in the pocket for adding pictures or a second small album.

Would you like to Win my Winter Fun Folio Album?

There are several ways to enter.  

  • Leave a comment on this post telling me you’d like to win.
  • Follow, Like and Comment on my Facebook Page
  • Follow, Like and Comment on my Instagram Page.
  • US Addresses Only.

Winner will be chosen:  Wednesday, February 9, 2021

Welcome to the Chapter 1 Eileen Hull/Sizzix Release Party Blog Hop!

Please hop through the blogs and be inspired by the work of the talented Inspiration and Educator teams.  Leave a comment for each designer (list below) and, you could win a Folio Journal die (as soon as it arrives!)

Join Eileen and special guests for a Facebook Live on Wednesday, February 3rd at noon Eastern.  Comment on the Facebook Live and be eligible to win either the Mandala Die or the Folio Pages, Pockets and Flowers Die.  (two winners!)

Winners will be announced on Eileen’s Facebook Live show on February 9th at 6:00 EST.

We appreciate your love and support, friends!

Hey, it’s a Pumpkin Pie Card

I’ll take a slice of pumpkin, please. 

My favorite Fall Pie hands down is a good slice of Pumpkin Pie with lots of whipped cream.

My grandma used to make the Pumpkin pies every year for Thanksgiving.

And because my husband would carry on about how it was the very best pumpkin pie,

she would bake an extra pie for him and drop it off at his work.

It was our little secret because she never wanted to be accused of having any favorites.

My pumpkin pie card was made with the “Hey, Pumpkin” stamp and die set from The Maker’s Movement.

Supplies Used:         (*affiliate link)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Directions:

  • Cut out the “our fall favorites” journal card from the scrapbook paper sheet.
  • Use mini maker die cut machine and the scalloped heart-shaped die to cut out the pieces for the pie out of cream and burnt orange cardstock.
  • Cut a white swirl using the small swirl die and the white cardstock.

Tip…I like to run the small pieces of cardstock through the Xyron Create-A-Sticker* before I die cut them.  It makes it so much easier to adhere the small pieces onto the card.

  • Put the finished pie pieces together, and using the small “v ” shaped die, cut a small pie-shaped piece out of the pie.

  • Adhere the pie pieces onto the “our fall favorites” journaling card.  I added a small thin foam mounting square to add the whipped cream onto the pie.
  • Stamp the words “Hey, Pumpkin” onto the bottom of the card.
  • Layer the card onto a piece of gold textured card.

Disclosure:  This is a sponsored post  for Maker’s Movement.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own.

Toil & Trouble Halloween Shaker Card

Double, Double Toil & Trouble

I’m mixing up a little Halloween fun in the cauldron with this cute little shaker card.

The shaker card uses the “Witch, please” stamp and die set from the Maker’s Movement.

Disclosure:  This is a sponsored post.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own.

Materials Used:            (*affiliate link)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to Make a Toil and Trouble Halloween Shaker Card….

There are several different ways to make a shaker card.  (This is how I decided to make this one.)

Directions:

  • Cut a piece of double-sided adhesive craft foam approx. 3-1/4″ x 4-3/4″.
  • Using the caldron outline die, die-cut the caldron shape into the craft foam.
  • Cut a piece of scrapbook paper approx. 4″ x 5-1/2″.  Die-cut the cauldron shape into the scrapbook paper.
  • Cut a small piece of acetate to cover the opening of the caldron.
  • Remove protective coating off the acetate.
  • Remove the protective liner off the double-sided adhesive craft foam.
  • Stick the acetate over the opening.

  • Line up and stick the cauldron opening of the scrapbook paper over the cauldron opening of the craft foam and acetate.
  • Trim the excess paper using a cutting mat and craft knife.

  • Turn the craft foam over and fill the cauldron with Spooky Shaker Sprinkles.  Make sure not to overfill, you want to leave enough room for the sprinkles to shake.
  • Cut a second piece of acetate to cover the cauldron opening.
  • Pull back the protective liner on the craft foam and place the acetate over the opening.

  • This is a little pro tip…I used a black calligraphy paint pen marker to color the sides of my craft foam.  The white core would have just made the foam stand out and not in a good way.  I like to use a black marker to cover the edges of my darker colored paper that would have a white or light core.

  • When using small or thin die-cut shapes, I like to run the paper through the Xyron Create-A-Sticker Maker* before cutting out the shapes.  (It makes it so much easier to apply.)
  • Cut a cauldron outline from glossy copper card-stock and stick onto the acetate.
  • Cut the boiling pot shapes out of light green card-stock and stick on the top of the cauldron.

    • Die-cut small bubbles from the die set and mount using thin black adhesive 3D foam squares* over the various circles of the scrapbook paper.
    • Stamp words in black ink onto a small piece of aged parchment card-stock.  Mount onto the front of the card using thin black foam squares.
    • Remove the protective liner from the back of the craft foam and stick onto a glossy card-stock layer.
    • Add the additional layers onto a black card.

Save

Save

Save

Save

Save

Save

How to make a Mini Gift Bag out of an Envelope

The Quick and Easy way to make a Mini Gift Bag from an Envelope.

The Envelope Gift Bag is a great way use large envelopes and recycle old ones.

The gift bag was decorated using the Farmhouse Market Collection from Carta Bella.

Supplies Used:          (*affiliate link)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Directions:

  • Seal the envelope closed.
  • Cut the end off one side of the envelope.

  • Score the envelope 3/4″ on the remaining three sides of the envelope.  You will need to use medium to firm pressure when scoring to crease through all the layers.  Score on both sides of the envelope.
  • Fold the envelope on each score line.  Use the scoring tool to go over each line to make sure you have a good sharp crease.

  • Put your hand inside of the envelope and gently start opening it up.  Refold the lines as you open it up.   Create gusset folds on the sides of the bag.
  • Once the bag is fully open you will have two pointed flaps sticking out on each end.  Add adhesive to the flaps and adhere to the bottom of the bag.  (you can also add a piece of decorative washi to the bottom of the bag to hold the flaps in place.)

  • Start decorating the bag.
  • Add a decorative strip of washi tape around the bottom of the bag.
  • Add stickers to the front of the bag.  Stickers are a great way to cover up a name when re-using an envelope.

  • Fill the bag with your gift.
  • Fold the top of the bag over and crease.
  • Punch two holes in the top of the bag and add ribbon.

Remember the next time you get a card to carefully open the envelope on the side so

that you can recycle it into a cute little gift bag.

Cigar Box Washi Tape Holder

How to Make a Cigar Box Washi Tape Holder 2790

Making Creative Storage for my ever growing collection of Washi Tape.

I have a small, growing collection of Washi Tape.

In addition to all it’s many uses, I find that they are just pretty to look at.

Previously, I had all my washi tape gathered in a canning jar, although pretty…

I found myself dumping the jar every time I wanted to use one.

Being on a “old drawer” kick, I decided to make a small washi tape holder using an old cigar box.

Materials 2764

I used two sheets of scrapbook paper from Carta Bella’s “Warm & Cozy” collection.

basic supplies:  craft knife, cutting mat, craft glue, double stick tape roller and a metal label holder, black marker.

pieces 2767

To Make a Cigar Washi Tape Holder:

  • Cut the lid off the cigar box.  Measure and cut the lid into two strips to fit inside your box as dividers.
  • Remove excess loose paper from box.
  • TIP:  Use a black permanent marker to color the inside corners of your box.  This will help keep  any white from the box from showing.
  • Cover box with scrapbook paper.
  • Adhere paper over both dividers.
  • Apply craft glue onto bottom and sides of dividers and put into place.

empty box 2773

Cigar Box Washi Tape Holder 2808

Add metal label holder and fill with your favorite washi tape.

CreateForLess.com - Create More, Spend Less

*Disclaimer:  This post uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!