Easy Peasy Upcycled Container

I love a good upcycled, recycled project.

Creating a useful item from something that would be thrown away or put in the recycling bin.

This project was made using an empty Nesquik container.

I have been drinking chocolate milk for as long as I can remember. My dad used to use the Nesquik containers in his garage to store nuts and bolts and lots of other small items. We found several vintage cans out in his garage when we were going through it.

I LOVE making things using craft vinyl and my Silhouette Cameo Electronic Die Cutting Machine*  There are so many things you can make and decorate.

Tip:  If you don’t have access to these products, you can still UPCYCLE/RECYCLE a container like the Nesquik Can using decorative paper, contact paper or stickers to personalize and embellish.  (Below are the directions and materials on how I upcycled my container.)

For my Easy Peasy Lemon Squeezy Up-cycled Container I used:

StyletechCraft products brought to you by ATSM Craft

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Directions:

  • Measures and cut two pieces of  vinyl to wrap around the container.  (I used one long piece and one shorter piece.)
  • Use the printed graphics on the side of the container to line up your edge.  Slowly wrap the vinyl around the container smoothing as you go to reduce the air bubbles.

  • Use the squeegee tool to smooth the vinyl.  If you can’t get rid of the air bubble with the squeegee tool you can use a small pin to poke a hole in the vinyl to release the air.

  Silhouette Cameo Electronic Die Cutting Machine*

You can find the Easy Peasy Lemon Squeezy SVG file at the Silhouette Design Store.

  • Use the vinyl pick to remove the letters from the vinyl lemon, leave the inside pieces of the letters.

  • Cut a piece of Vinyl Transfer Tape* to fit over the vinyl image.  Gently rub over the transfer paper using the squeegee tool.
  • Remove the vinyl from the white liner, center the image on the front of the can.
  • Gently rub over the Vinyl Transfer Tape* to make sure all the image has transferred.   Remove the transfer tape.
  • Repeat the process with the stem and leaf.

A fun little upcycled project, great for many different uses.  (not just in the garage)

Place several cans side by side for a cute and creative way to store supplies.

“This is a sponsored post.  As a member of the StyleTechCraft Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

    

Don’t Miss a Thing…Make Sure to Follow me

If you liked this post  you might also like Organizing the Kids Craft Cabinet.

Pin ME↓

Save

How to make a Mini Gift Bag out of an Envelope

The Quick and Easy way to make a Mini Gift Bag from an Envelope.

The Envelope Gift Bag is a great way use large envelopes and recycle old ones.

The gift bag was decorated using the Farmhouse Market Collection from Carta Bella.

Supplies Used:          (*affiliate link)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Directions:

  • Seal the envelope closed.
  • Cut the end off one side of the envelope.

  • Score the envelope 3/4″ on the remaining three sides of the envelope.  You will need to use medium to firm pressure when scoring to crease through all the layers.  Score on both sides of the envelope.
  • Fold the envelope on each score line.  Use the scoring tool to go over each line to make sure you have a good sharp crease.

  • Put your hand inside of the envelope and gently start opening it up.  Refold the lines as you open it up.   Create gusset folds on the sides of the bag.
  • Once the bag is fully open you will have two pointed flaps sticking out on each end.  Add adhesive to the flaps and adhere to the bottom of the bag.  (you can also add a piece of decorative washi to the bottom of the bag to hold the flaps in place.)

  • Start decorating the bag.
  • Add a decorative strip of washi tape around the bottom of the bag.
  • Add stickers to the front of the bag.  Stickers are a great way to cover up a name when re-using an envelope.

  • Fill the bag with your gift.
  • Fold the top of the bag over and crease.
  • Punch two holes in the top of the bag and add ribbon.

Remember the next time you get a card to carefully open the envelope on the side so

that you can recycle it into a cute little gift bag.

DIY Mini Ketchup Bottle Snow Globe from recycled materials

Creating a Snow Globe from a Mini Ketchup Bottle

A little Holiday up-cycling project for my fellow collectors (aka savers).

When you order room service at some hotels you get these little glass condiment jars.

When my husband used to travel he’d occasional bring them home.  (I’ve trained him well.)

Add in a few miscellaneous supplies and I had the start of a cute little snow globe.

There are several options to use as a base.  Old hardware pieces, vintage Jello molds.

Materials Used:

Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

To Make the Mini Ketchup Bottle Snow Globe:

  • I gave the brass piece and the lid of the ketchup bottle a light sanding and sprayed it with Rust-Oleum Spray Paint in Colonial Red*.  (my favorite red)  It might take a couple coats.
  • This was the hard part for me.  Allow the paint to fully dry before handling.  (trust me)
  • Using Super Glue*, glue a small bottle brush Christmas tree (found at most craft stores) on the inside of the ketchup bottle lid.  Make sure that the base of the tree is not larger than the opening of the bottle.
  • Glue large flat button to the bottom of the jar.  (or is it the top of the snow globe) Glue a decorative button to the white button to add height and extra prettiness.
  • Add a small amount of white glitter or fake snow to your bottle and screw on the lid with Christmas tree.
  • Glue ketchup bottle lid to painted brass base using  Super Glue*
  • Wrap a Craft Pine Stem* around the neck of the bottle and glue in place.
  • Tie a ribbon around neck of bottle.
  • Glue small snowflake embellishment.

If you liked my Mini Ketchup Bottle Snow Globe check out my Christmas in a Pickle Jar.

    

Don’t Miss a Thing…Make Sure to Follow me

This Christmas Give the Gift of Amazon Prime*