Mini Floral Wreath

Mini Floral Wreath 7122

I get some of my best creative inspiration late at night…

I was planning on making a card using these 3-D puffy stickers from Paper House Productions

when a light bulb moment happened and I decided to make a wreath instead.

I’m really happy with the way it turned out, a little different and very easy to make.

Tip:  Use a good craft glue to adhere the stickers to the ribbon.

Mini Floral Wreath Collage

Paper House Productions Stickers Used:

Additional Supplies:

How to make a Mini Floral Wreath using 3D Puffy Stickers:

  1. Wrap wreath with satin ribbon.
  2. Start with the large pansy flowers and glue evenly around wreath.
  3. Fill in wreath by gluing on the smaller flowers, butterflies and leaves. (The leaves are from the lady bug sticker sheet.)
  4. Tie a thin silver ribbon around wreath to use as a hanger.
  5. Make a bow from the sheer ribbon and glue onto the top of the wreath.

This is a sponsored post. As a member of the Paper House Productions Design Team.

Join Amazon Kindle Unlimited 30-Day Free Trial

Disclaimer:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

DIY Up-cycled Jar…a little trash to treasure

Ikea Toothbrush Holder

I was about to throw away this inexpensive toothbrush holder

(from IKEA) while cleaning my bathroom, when I got the idea.  I’m always looking for items

to use as a base on repurposed projects and thought this was perfect for a quick project.

Inspiration and ideas can be found anytime, anywhere…

even while cleaning your bathroom.
Upcycled Jar and Toothbrush Holder 3964Upcycled Jar and Toothbrush Holder 3988
Great Storage or Gift Idea.  So many ways to customize using items destined for the trash.

How to make an Up-Cycled Jar…

Materials Used:                                            (affiliate links)

Upcycled Jar Collage

Directions:
  1. Disassemble toothbrush holder.  Set aside the top portion of the holder for future projects.
  2. Paint the bottom of the holder, the lid of the jar and the cabinet knob with black semi-gloss spray paint.
  3. Glue the bottom of the jar to the painted base.
  4. Cut a circle from the decorative paper and adhere it to the top of the lid.
  5. Glue knob onto the center of the lid.
  6. Add chalkboard label to front of the jar.

craft-ideas-garden-2016

The DIY Up-cycled Jar was featured in  2016 Craft Ideas Garden Issue. (page 72)

This project was created for and sponsored by Craft Ideas Magazine.

Check out Craft Ideas Magazine for Craft Ideas for Every Occasion, Every Skill Level.

Join Amazon Kindle Unlimited 30-Day Free Trial*

Disclaimer:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Create a Simple Vase Centerpiece

Washi Tape Vase and Flowers 2

Want to make a great impression but don’t have a lot of time? 

Here’s a quick and easy centerpiece project for your next party or gathering?

Washi Tape and Vase

I put together this simple vase using Washi Tape I received from Little B LLC

and an inexpensive dollar store cylinder vase.

TIP:  I drew a line with a permanent marker halfway down the vase to use as a starting point to keep everything neat and all my lines straight.  Simply wrap the vase with the washi tape.  (it’s that easy)    It only takes a few minutes to create an elegant look.

Washi Tape Vase Close Up

Next…I filled it with fresh flowers cut from my garden.

Or pick up a bouquet at the grocery store.

It would be great centerpiece vase for Weddings, Showers or any special gatherings.

It’s a temporary idea with elegant results. 

Here’s the list of the Little B Decorative Tape Used:

  • 100435 Silver Foil Black Pin Stripe
  • 100562 Gold Foil Hearts
  • 100047 Blk w/Sm Wht Polka Dots
  • 100443 Gold Foil Toile
  • 100344 Black and White Stripe
  • 100011 Damask Black/White
  • 100563 Gold Foil Love

A Quick and Easy DIY Gift for Her

Quick and Easy Gift for her 6988

Need a quick and easy gift for Mom or that new Grad in your life?

plain pink pencil cup 7023

 Deflect-O Photo Frame Pencil Cup*                                      (*affiliate link)

This pretty pink pencil cup from Deflecto is cute all by itself.

But add some decorative washi tape, a couple small pieces of decorative paper and

a few random stickers and you have a special gift ready to give.

Make it extra special and add a couple photos of you and her together.

Pink Pencil Cup Close Up 7013

I wish I could tell you where to find this cute pink rosebud washi tape.

My daughter gave it to me as a mother’s day gift a few years ago.

I’m sure with the huge variety of washi tape available you’ll find one just as nice.

Pink Pencil Cup 7009

If pink’s not your style?

Here’s a project I did last year using Deflecto’s Black pencil cup. ↓

Quick & Easy Washi Tape Make Over 7014

Quick & Easy Washi Tape Make-Over

“This is a sponsored post. As a member of the Deflecto Design Team I have been
provided product in exchange for my creative ideas, views and opinions.”

 AD↓

*Disclaimer:  This post uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Join Amazon Kindle Unlimited 30-Day Free Trial

Vintage French Inspired Keepsake Box

Vintage French Inspired Keepsake Box

I am a guest blogger on the Walnut Hollow Blog sharing my Vintage French Inspired Keepsake Box.  Make to stop by their blog to check out the full tutorial here.

Supplies Used on the Vintage French Inspired Keepsake Box…           (affiliate link)

*The Vintage French Inspired Keepsake Box was created for and sponsored by Walnut Hollow and DecoArts.

Shop Amazon Scrapbooking Supplies*

Disclaimer:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Buy the Planner Value Kit

Clever Storage Ideas

Creative Storage Collage 2

I’m not one that’s easily impressed…

I’ve been told I’m a hard sell.

Let me tell you, these new storage containers from Deflecto has really impressed me.

So much that I made a quick 2 minute video to show the benefits and features.

Well thought out and versatile.  My new go to caddy to take to classes.

Ask for them at your local craft store.  Also available on Amazon*.

Deflecto Caddy Organizer, Three Compartments, White (29003CR)

Deflecto Stacking Organizer, 3″ x 3.89″ x 3″, 1 Compartment (20101CR)

 

“This is a sponsored post. As a member of the Deflecto Design Team I have been
provided product in exchange for my creative ideas, views and opinions.”

*This post uses Amazon Affiliate links.  I am an Amazon Affiliate

DIY Seashell Lamp

DIY Seashell Lamp 5998

Oh…to be by the ocean listening to the waves and picking up shells.

Lately, I’ve been dreaming of summer vacation and relaxing on the beach.  (it’s my happy place!)

Like most people, I love to walk the beach and collect shells.

During the summer, I like to display my shells in a large clear vase on the mantle.

It reminds me of fun summer family vacations.

Last month, when I received the Lighten Up Kit from Etchall®, I thought…

“wouldn’t it make a cute Seashell Lamp to put on the patio to use on those

warm summer nights?”

I used shells collected during our trips to South Carolina.  (some even from the Isle of Palms)

Lamp Close Up 5992

Here’s what I used to make the DIY Seashell Lamp:        (*affiliate link)

Seashell Lamp Collage 2

The shade measures 4″ x 7″.

Directions:

  1. Clean mason the jar to remove all dirt, fingerprints and oil.  Dry with a coffee filter, paper towel, or lint-free cloth.
  2. Mask off a 1″ area around the mason jar with removable painters tape.
  3. Apply a heavy coat of etchall® etching crème to the masked area using the etchall® squeegee.  Leave etching crème on for 15 minutes.  After etching time has elapsed, use the squeegee to return the crème back into the original container for later re-use.
  4. Rinse etched surface with hot water to remove any remaining crème.  Remember to keep crème away from porcelain or ceramic tiles.
  5. Dry mason jar and apply the “relax” peel and stick stencil onto the middle of the first side.  Mask the sides of the stencil with removable painter’s tape.
  6. Using a stencil brush and the multi surface paint, fill in the open areas of the stencil.
  7. Carefully remove stencil and clean before stenciling on the other three sides of the jar.
  8. Fill Jar with sand and shells.
  9. Using the plastic sleeve template, trace onto a piece of burlap. Cut the burlap leaving a 1/2″ allowance around traced template.  Craft Confession:  I tried using a “stick it adhesive sheet” on the burlap first before cutting it out.  It didn’t work.  (see next step)
  10. Use spray adhesive to coat the back of the burlap.  Apply onto the lampshade and trim.
  11. Glue twine around edge of lampshade.

Optional:  The top of the shade is removable so I spray painted it black.

DIY Seashell Lamp 05959

The Lighten Up Kit is pretty easy to customize.  Lots of possibilities.

It comes with a self-illuminating lampshade with LED lights, template and instructions guide.

It uses 3 AA batteries so it’s portable and can be used almost anywhere.

The DIY Seashell Lamp was created for and sponsored by Etchall®.

Shop Your Fav Brands at Scrapbook.com

*Disclosure  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Making a place for Dad’s coffee

Making a place for Dad's Coffee 5605

Dad comes over every Monday, Wednesday and Thursday evenings for dinner.

It’s our weekly ritual.

He arrives at 5:30, sits in the leather chair closest to the television, in time for the evening news.

While he watches the news, I make dinner.  That’s the routine.

Dad sits in that particular chair so he can read the closed captioning.

Unfortunately, that’s the one chair that doesn’t have an end table.

Occasionally… he’ll give me a hard time telling me I need a table so he can put his coffee

cup down.  Problem is there’s no room to put one there.

old stool 5552

Problem Solved…

I noticed this old stool down in the basement, paint splattered and water stained.  (a little ugly)

A make-over was in order and I knew exactly what I wanted to do.

I wish you could of saw the smile when I told him why I did this.  (I had to sneak the first picture)

He thought it was perfect.

Easily put away when not in use.

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Finished Stool with coffee cup 5592

Old Stool Make-0ver Products Used:                                                   (*affiliate link)

*FTC Disclosure… “This is a sponsored post.  I have been provided product in exchange for my creative ideas.  The views and opinions are my own.”

Old Stool Make Over Steps

Directions:

  1. I gave the top of the table a quick sanding with my palm sander to smooth out the paint splatters.  (I could of sanded the legs but I was lazy.)
  2. I used Tattered Angels Decor and DIY, Ebony*, I love that you don’t need to do any sanding or priming.  I love the smooth matte finish that it gives.  I gave the table 2 coats of paint and some touch ups.
  3. Allow the paint to fully dry and cure before starting the stenciling.
  4. I custom mixed Americana Décor Chalky Finish paint relic and everlasting for a light contrast to the ebony black finish.
  5. Center the stencil onto the middle of the stool and tape down the edges with removable painter’s tape to keep the stencil from moving.
  6. Use stipple brush to apply Chalky Finish paint inside open stencil areas.
  7. Remove Stencil.
  8. For the time being, I’ve decided to leave the stool as is.  You may want to apply a finishing wax to help protect the paint.

   

Don’t Miss a Thing…Make Sure to Follow me

Shop Amazon Scrapbooking Supplies*

Speckled Eggs for Spring

Speckled Eggs for Spring 4927

Now that I only have a teen-ager at home, we don’t do the dyed eggs anymore.  (he’s no fun)

But… I still needed some soft pastel hued Speckled Eggs for Spring.

Putting my eggs in one basket 4847

So… I grabbed a few of my Smoothfoam Eggs.

I gave the eggs a light sanding to remove the ridge and painted them with a soft chalky finish.

Like the name suggests, these eggs have a smooth finish making them perfect for painting.

The best way to paint an egg 4895

The best way to paint an egg…

Use a small glass or candle votive to hold the egg.  Paint one half of the egg at a time.

Speckled Eggs Close Up 4943

I especially like the look of speckled eggs, so I grabbed an old toothbrush for speckling.

  • Speckled the eggs by lightly rubbing the old toothbrush into brown paint and gently flicking the paint onto the eggs.
  • Make sure to wear an apron to protect your clothing.  Flicking can be quite messy.

This project was created for and sponsored by Smoothfoam™, The Crafters Foam.

Paper Sculpting made easy…

Another Fun Blog Hop!

As a Deflecto Design Team member, I am super excited this week to play with our friends over at Stampendous.  With two amazing teams joining in the fun you will want to check in everyday of the hop.  There will be some fabulous projects and we’re going to be showing them off all week long.

Make sure to scroll all the way to the bottom for a chance to win some awesome prizes.

Deflecto Stampendous Blog Hop Logo 2

 Paper Sculpting made easy…

Deflecto Stampendous Blog Hop 5022 1

Years ago, when I still had my store, we had a Paper Sculpting Card Class

using of all things a sunflower stamp.  (oh, my…cutting all those petals!!!)

While the end look was beautiful, I thought the ladies were going to revolt.

They held that card over my head for years.  (it was not for the faint of heart)

Matter of fact, I was reminded of that card not that long ago.

   

Do you love the look of paper sculpting but hate all that fussy cutting?

With this stamp and die set from Stampendous, there is minimal cutting and the flower assembly

goes together very quickly.

The Cling Rose Bouquet Rubber Stamp Set from Stampendous comes with various sizes

of flowers each meant to be used separately or layered together to create one large dimensional flower.

When used with the matching die set, you get amazing results.

Flower Close Up 5015

Here’s what I used on my frame:

Paper Sculpting made easy

Directions:

  1. Stamp the flowers and leaves onto the patterned paper.  (see above image)
  2. Die-cut the shapes using the thin dies and big shot die-cutting machine.
  3. Cut the leaves off the rosebud and the bottom portion of the second stamped rose image.
  4. Use a gray marker to go around the outside edge of each image to hide the white core of the patterned paper.
  5. Using a foam mat or mouse pad and a large ball stylus, turn the shapes over onto the mat and gently rub the shapes with medium pressure on the back of the shapes.  This will give the shapes added dimension.
  6. Using thin foam mounting squares, adhere the flower sections together in this order: large rose, medium rose, rosebud and bottom section of medium rose to create one large rose.
  7. Cut out the 4″ x 6″ What a Wonderful World section and adhere onto a 5″ x 7″ polka dot paper layer.
  8. Add layers inside the clear acrylic beveled frame from Deflecto.
  9. Mount dimensional flowers and leaves onto the front of the frame using thin foam mounting squares.

You’ll want to get your commenting fingers ready!  Each comment on a post this week will enter you to win a fabulous prize package! (one comment per post, per person)  Contest open to USA residents only.  We have three prizes, and each will have a 3 Tiered Cake Stand from Deflecto AND the Stamp and Die Sets from Stampendous.

Cupcake StandCRS5087_DCS5087_SSH57

Now click on the links below and get to hoppin’!  Remember to comment on each blog and then return to the Deflecto Blog and leave a comment there for your chance to win.

Are you social? We are too! Please check us out at the following locations…

 

This is a sponsored post. As a member of the Deflecto Design Team I have been
provided product in exchange for my creative ideas, views and opinions.”

*This post uses Amazon Affiliate links.  I am an Amazon Affiliate