I Love You a Bushel and a Peck…

A DIY Sign for Valentine’s Day or for everyday..

using Styletech Craft Vinyl and my Silhouette Cameo.

My mom loved to sing this song.

She sang it to us when we were kids and then she sang it again to our kids.

This song and sign brings back all the warm fuzzies and good memories.

A Perfect Love Song for Valentine’s Day and everyday.

To make the “I Love you a Bushel and a Peck” sign I used:

Directions:

  1. Using the “Bushel and a Peck” SVG cut file and the Silhouette Cameo re-size the image to fit inside your frame.
  2. To keep it simple, I cut the image out twice using both the black and magenta glitter vinyl.
  3. Remove the excess vinyl (the negative pieces) using a Craft Vinyl Weeding Tool* or pick.
  4. Remove all the hearts and flourishes from the black vinyl.
  5. Remove the words from the magenta vinyl.
  6. Use Vinyl Transfer Tape* to pick up and apply the words directly onto the piece of scrapbook paper.  Gently rub over paper.  Remove transfer tape.
  7. You can re-use the transfer tape to pick up the hearts and flourishes.
  8. Carefully line up the hearts and flourish over the words.  Remove transfer tape.
  9. Add finished sign into frame and enjoy.

Tip:  If you’re good, you can carefully pick up the words from the magenta glitter vinyl and use it on a separate project.  Like the “Hug” cup down below.

From the 1950’s Musical “Guys and Dolls”…Sang by Doris Day

I love you a bushel and a peck
A bushel and a peck and a hug around the neck
A hug around the neck and a barrel and a heap
A barrel and a heap and I’m talkin’ in my sleep

About you, about you
‘Cause I love you a bushel and a peck
You bet your purdy neck I do
A doodle oodle ooh doo
A doodle oodle oodle ooh doo

“This is a sponsored post.  As a member of the StyleTechCraft Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

12×12 Glitter Vinyl Sheets from StyleTechCraft available on Amazon*

Shop Your Fav Brands at Scrapbook.com

*Disclaimer:  This post uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Shop Amazon Scrapbooking Supplies*

Happy Holidays Chalkboard Sign

How to Create a Happy Holidays Chalkboard Sign with a Simple Button Bow.

I really enjoy working with vinyl and love coming up with simple Holiday DIY projects.

The Happy Holidays Sign was one of the projects we created in last month’s Holiday Workshop.

For my sign, I used Styletech Craft’s Ultra Metallic Glitter Adhesive Vinyl in red, green and

white.  The Ultra Metallic Glitter Vinyl has a white backing which ensures the colors stay bright

and true no matter what surface you apply it too.

To start my project…                                                                                 (*amazon affiliate links)

  • I used a piece of Wood Hardboard*.  (it’s like a hole-less peg board) I cut mine 5 1/2 x 7 1/2″.
  • Drill two small 3/8″ holes in the top of the board to use for hanging the sign.
  • Paint the board using DecoArt Black Chalkboard Paint*.
  • Lightly sand the board using 3M Sandpaper, 220-Grit*.  This smooths the board and allows a little bit of the brown board to show through for a vintage look.
  • Wipe the board with a clean soft cloth.

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

  • I applied the words on the chalkboard using Styletech Clear Vinyl Transfer Tape*.
  • I applied the word “Holidays” first and lined the word “Happy” over top.
  • Cut a small white snowflake using white ultra metallic vinyl and add onto the sign above the word happy.
  • Create a “Button Bow”  for the top of your “Happy Holidays Chalkboard Sign”.
  • Directions for “button bow” below.
  • Add twine to the two top holes for hanging.
  • Glue Button Bow onto the top of the “Happy Holidays Chalkboard Sign” using craft glue*.

“This is a sponsored post.  As a member of the StyleTechCraft Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Shop Your Fav Brands at Scrapbook.com

How to Make a Holiday Button Bow…

  • Fold ribbon in thirds.  (like your getting ready to tie a tie.)
  • Gather and wrap twine around the center of the ribbon a couple of times and tie tightly.
  • Add a jump ring to the jingle bell and add onto one end of the twine and tie.
  • Add button to both ends of the twine and tie to the center of the bow.
  • Trim the ends of the ribbon and twine.

Ask for Styletech Craft vinyl at your local craft store

or online at ATSMCRAFT and limited availability on Amazon.

StyleTechCraft Christmas Colors Bundle on Amazon*

 

Shop Amazon Scrapbooking Supplies*

DIY Christmas Blocks from Wood Scraps

Quick and Easy Christmas Decorations using Wood Scraps, Vinyl and Stencils.

Got any old wood scraps lying around?

My Dad used to keep a box of old wood scraps for the kids to build and play with.

I grabbed a few of the worn out blocks for my holiday projects.

To make the Holiday Blocks…

Shop Your Fav Brands at Scrapbook.com

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

  • Use Vinyl Transfer Tape* to pick up and apply the word directly onto the block of wood.
  • Rub over the letters using a vinyl scraper tool to remove bubbles and help the vinyl cling to the wood surface better.
  • Remove transfer tape.

  • Tie a simple ribbon around holiday berries and glue it to the top of the painted wood block using a quick dry glue*.
  • I placed the block onto an old vintage metal base scrounged and saved from my Dad’s garage.  (I love reusing cool old vintage junk.)
  • The Stag and Merry Christmas images were also created using my Silhouette Cameo and applied the same way as the Believe block.)

really simple Holiday Décor.

StyleTechCraft Christmas Colors Bundle on Amazon*

If you don’t have access to an electronic die cutter you might want to try a little DIY stenciling.

  • The “Believe” wood block was painted with red acrylic paint and stenciled using the Believe stencil from DecoArts and a stencil brush*  

Another quick and easy Holiday DIY.

Need Stencils?  I have several DecoArts Stencils in my Etsy Shop.

“This is a sponsored post.  As a member of the StyleTechCraft Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

      

Don’t Miss a Thing…Make Sure to Follow me