A Coffee Gift Card Holder for Mom

a Coffee Card for Mom

How to make a “coffee-themed” gift card holder for Mom for Mother’s Day.

Do you have a Mom who’s a coffee lover?

Make her a cute “coffee-themed” card perfect for adding a gift card to her favorite store

or coffee place.

A Coffee Themed Gift Card Holder for Mom.

Materials Used:     (*affiliate link)

    

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

A Coffee Themed Card for Mom

Directions:

  • Die-cut the pieces from the Coffee Die Set out of scrapbook paper using the Crossover II Die-Cutting Machine.
  • Assemble the die-cut pieces on a layered card front.
  • For the base of the gift card holder, I cut a piece of cardstock 5 1/4″ x 9 3/4″.  Score lengthwise every 3 1/4″.
  • Adhere a 3″ x 5″ piece of green polka dot paper onto the middle panel.
  • On the third panel, cut down the side approx. 2 1/2″.  Cutaway the remaining section of the panel on a diagonal to create a flap.
  • Adhere the bottom and the short side of the flap to the middle panel to create a pocket.
  • Decorate the pocket with a flower that was “fussy cut” from the floral paper.  Add a small strip to edge the pocket.

Die-Cutting letters using the Crossover II.

Directions Continued:

  • For the letters on the front of the card, I used gold foiled paper.  To make the letters stickers, I ran the gold foiled paper through the Xyron Creative Station*.  As you run the paper through the machine it adds a complete layer of adhesive to the back of the paper.
  • Die-Cut the letters to spell “MOM” using the Alphabet Die Set and the
  • Die-cut the gold foiled paper (with adhesive added to the back) using the alphabet die and the Crossover II Die-Cutting System*.
  • Remove the backing off the back of the letters and stick them onto the front of the card.
  • Tie gold thread around the front of the card and tie it with a knot.

LETTER ALIGNING TIP…If you’re a perfectionist like I am and want to align the letters as straight as possible. Use Gridded Transfer Paper* to help you line up the letters. Place the front of the foiled letters on the adhesive side of the transfer paper, remove the backing off of the foiled paper and transfer the letters onto the front of the card.

A coffee themed card for Mom

Now all you need to do is add a gift card for her favorite store or coffee place along with a sweet note.

Maker's Movement

Disclosure:  This is a sponsored post  for the Maker’s Movement.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own.   

Kaisercraft’s Flower Shoppe Accordion Book and Card

How to make an Accordion Album

How to make an Accordion Album using Kaisercraft’s Flower Shoppe Collection.

A quick way to make a mini album to showcase a few memorable pictures.

The album would make a great gift for someone special.

How to make an Accordion Album

Materials Used:         (*affiliate link)

   

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Accordion Album made with Kaisercrafts's Flower Shopped Collection.

Directions:

  • Cut two 4″ x 6″ matboard panels.
  • Cut two 5″ x 7″ green polka dot paper pieces.  You will need to generously apply adhesive to the back of the paper.  I like to use my Xyron Creative Station to add adhesive.  Run the paper design side up through the machine to add a “complete layer” of adhesive on the paper.  (no wrinkles, no electricity)
  • Lay matboard on center back of polka dot paper.  Miter paper edges by cutting diagonal triangle off each edge of four corners, leaving 1/8″ space between cut and matboard.  (TIP…save triangles to cover edges if corners don’t meet)  Fold edges over the matboard and adhere.  Repeat with the second set of panels.
  • Decorate the front of the album using designs from the “Arrangement” paper.  I layered the “bloom where you are planted” 3″ x 4″ section onto a 3 1/4″ x 4 1/4″ piece of cardstock.  For added dimension, I adhered the layers onto a 3 1/4″ x 4 1/4″ piece of matboard.
  • Paint four metal corners with white multi-media paint.  After the paint has fully dried, lightly sand over the corners to reveal the embossed design.  Fold around edges of the matboard layer.  Adhere layered matboard to the front of the album cover.

Kaisercraft Flower Shoppe-Accordion Album

  • Cut two 5-7/8″ x 12″ strips of “sunroom” scrapbook paper.  Score lengthwise every 3-7/8″.  You will end up with 3 panels and a small narrow section at the end of each strip approximately a 1/2″ inch.  On one panel, cut the extra 1/2″ strip off.  Adhere the 1/2″ tab onto the back of the other panel to create one long 6-panel accordion strip.  Refold the panel if necessary.
  • Adhere each end of the accordion strip to the 4″ x 6″ covered chipboard panels.
  • Create pockets and flaps using extra scrapbook paper pieces.

Kaisercraft Flower Shoppe Card-Sue's Creative Workshop www.sueeldred.com 8

And for the Card Makers…

I also made a card using the left over paper from the Flower Shoppe Collection.

DIY Graduation Card and Gift Card Holder

Graduation Card and Gift Card Holder-Sue's Creative Workshop www.sueeldred.com 7576

DIY Graduation Cap Card and Gift Card Holder

How to make personalized graduation cards for the special people in your life.

Graduation Card and Gift Card Holder-Sue's Creative Workshop www.sueeldred.com 7743

For the Graduation Card and Card Holder

I used The Maker’s Movement NEW Graduation Cap Die Set and the NEW Donut Box Gift Card Holder Die Set.

If you are a Cardmaker/Paper Crafter, make sure to check out all NEW RELEASE Stamp & Die Sets now available. So many cute sets!  (and I promise, I will have more on the donut box later)

Maker's Movement

Disclosure:  This is a sponsored post  for the Maker’s Movement.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own.   

Additional Materials Used:                (*affiliate link)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Graduation Hat Card-Sue's Creative Workshop www.sueeldred.com 7720

Directions:

  • The pieces for the Graduation Cap were die-cut out of Black Glossy Cardstock* and edged in gold using a Gold Chisel Tip Calligraphy Pen*.
  • The gold layer for the card is Rinea Foiled Paper which was adhered to the card base using a Tape Runner*.  
  • The tassel and button on the cap were made using the gold foiled paper adhered to cardstock and then die-cut.

Graduation Hat-Xyron Creative Station-Sue's Creative Workshop www.sueeldred.com 7696

  • I used the Xyron Creative Station* to add adhesive to the back of the foiled paper.
  • This picture is when I used the Xyron Creative Station* to add adhesive to the purple foiled paper for the gift cardholder.  
  • I also added adhesive to the gold foiled paper used to create the letters on the front of the card.

Graduation Hat Card-Crossover II Diecutting Machine-Sue's Creative Workshop www.sueeldred.com 7769

  • Die-cut the gold foiled paper (with adhesive added to the back) using the alphabet die and Crossover II Die-Cutting System*.
  • The adhesive on the back of the foil makes the letters stickers and easy to adhere. 

LETTER ALIGNING TIP…If you’re a perfectionist like I am and want to align the letters as straight as possible. Use Gridded Transfer Paper* to help you line up the letters. Place the front of the foiled letters on the adhesive side of the transfer paper, remove the backing off of the foiled paper and transfer the letters onto the front of the card.

Graduation Hat Gift Card Holder-Sue's Creative Workshop www.sueeldred.com 7603

To Make the Graduation Cap Gift Card Holder:

  • To make my gift card personal, I chose to make my graduation cap purple to honor the school colors of this year’s graduate.
  • Add adhesive to the back of the foiled paper using the Xyron Creative Station*.  (see previous picture)
  • Die-cut the pieces of the graduation cap using the Crossover II Die-Cutting System*.
  • Die-cut the base of the gift card holder out of black glossy cardstock and the New Donut Box Die.
  • Fold the box on the score lines and adhere to side tabs to create the box.  
  • Adhere a small piece of paper on the inside of the box to finish creating the lid.  
  • Adhere the Graduation Cap pieces onto the top of the box.  If you would like a little dimension, add 3D Adhesive Foam Squares to the back of the cap before adding it to the box.

Graduation Hat Gift Card Holder-Sue's Creative Workshop www.sueeldred.com 7646

  • Add a little personality on the inside of the box with graduation-themed scrapbook paper.  
  • Insert candy, gift card, or cash for a graduation gift they’re sure to love.

Flower Garden Notecard Folio

Flower Garden Notecard Folio-Sue's Creative Workshop www.sueeldred.com 3854

How to Create a Flower Garden Notecard Folio

To Celebrate Spring and all things Flowers, I decided to make a Notecard Folio using paper from

Carta Bella’s Flower Garden Collection and Eileen Hull’s New Folio Journal Die from Sizzix*.  

      NEW Folio Journal at Sizzix

Materials Used:         (*Affiliate Links)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Flower Garden Notecard Folio-Sue's Creative Workshop www.sueeldred.com 3858

Album Details:

  • The album pieces are die-cut using Sizzix White Matboard Sheets*, which is the perfect size for cutting long pieces.  (You will need to cut the album pieces twice.)
  • There is a smaller rectangle die-cut piece that comes with the die. (cut two)  You will use the piece to create a pocket with the outer flap.  
  • Align and adhere both ends of the spine together using Tear It! Double-Sided Crafter’s Tape*.
  • Cover the front and inside of the album with decorative scrapbook paper.  (see album making tip below)
  • Album Making Tip:  I use my Xyron Creative Station* to add adhesive to my paper before sticking it onto the matboard.  It adds a complete adhesive layer with puckering or wrinkles.
  • Using a craft knife and cutting mat, I cut both ends of the flaps down to create 2 1/2″ pockets.  Adhere the “pocket pieces” (the small scored pieces that come with the die) to finish the bottom of the pockets.
  • I used Carta Bella Farmhouse Market Collections Stickers* to embellish the pocket fronts.

Flower Garden Notecard Folio-Sue's Creative Workshop www.sueeldred.com 3782

  • Create simple 3 1/2″ x 4 1/2″  layered cards using the Carta Bella Flower Garden:  3″ x 4″ Journaling Cards*.
  • After using one of the Journaling Cards for my front and back cover and another section for my green spine, I was able to create 8 small notecards to fill my notecard folio.  

Flower Garden Notecard Folio-Sue's Creative Workshop www.sueeldred.com 3898

  • The ribbon was added around the album before adding the front and back cover.
  • I created a small chipboard tag for the spine and punched the holes using a Crop-A-Dile Power Punch*.  
  • On the inside center binding, I hung a pen on the loop of ribbon that was added for the tag.

Flower Garden Notecard Folio-Sue's Creative Workshop www.sueeldred.com 3816

Wouldn’t this make a nice Birthday or Mother’s gift for someone special?

Making Valentines with New Slimline Essentials

Happy Valentine’s Day Slimline Card

I’m jumping on the Slimline Card Craze with the help of the New Slimline Essentials Die Set

from The Maker’s Movement.

What’s a Slimline Card? 

Basically, a Slimline Card is a tall card that fits into a business-size envelope.

The Slimline Essentials Die Set takes all the guesswork out of cutting the layers and makes

assembling your card a breeze.

Disclosure:  This is a sponsored post  for the Maker’s Movement.  I have been provided product
and compensation in exchange for my creative ideas.  The view and opinions are my own.

Materials Used:   (*affiliate link)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

     

Directions:

  • Die-cut all the layers for the card using the Slimline Essentials Die.
  • Cut three white scalloped squares.
  • Center the small square die in the middle of the scallop square.  Put a small piece of washi tape over the die to keep it in place.  Die-cut to create a small scalloped frame.

  • Place a piece of double-sided craft foam onto the square foam cutter die to cut small foam squares to use under the scallop frames.

To Create a Center Shaker Element.

  • Adhere a small piece of clear acetate to fit over the opening of the frame.
  • Because the foam frames didn’t match the frame I created, I cut the foam frames on the corners and placed them over the acetate.
  • Using only red and white heart sprinkles, fill the inside of the frame with the sprinkles. Be careful not to overfill so that there is room to shake.
  • Remove the protective lining on the foam and place a small piece of scrapbook paper over the foam.

  • Embellish the front of the card using hearts popped up with double-sided adhesive foam and the word “love” die-cut using the “Special Delivery” die set.

I love a clean and simple monochromatic card.  (and so much fun to make)

Sweet as Honey Pocket Notebook

How to Create a Pocket Notebook Album…

If you love yellow and black your going to love the bee inspired paper pack from DCWV.

Once I looked through the paper pack and  saw the gold embossed patterned papers I knew

it needed to be made into a mini album.

I used the Eileen Hull Notebook die along with the 12″ x 12″ paper pad to create my album.

You can find the DCWV Honey Dear Premium Paper Stack exclusively at JoAnn Fabrics.

To Create the Sweet as Honey Pocket Notebook I Used:                (*affiliate link)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Directions:

  • Cut two 6″ x 8-1/2″pieces of decorative scrapbook paper for the front and inside of the cover.
  • Lay decorative scrapbook paper (design side up) on the  Xyron Creative Station* crank the handle to run the paper through the machine.  As it moves through the Xyron Creative Station it adds adhesive to the back side of the paper.
  • Easy to use and it doesn’t need any electricity.
  • I like using the Xyron Creative Station* when making mini books because you get complete coverage, no wrinkling, no bubbles!

  • Cut a piece of mat board 6″ x 8-1/2″.
  • Adhere the decorative paper on each side of the mat board.
  • Lay the covered mat board over the notebook die* sandwiched between two cutting plates.
  • Crank the handle of the Sizzix Big Shot Die Cutting Machine*and run the die through the machine.  The Big Shot will cut and score the mat board.

  • The notebook die creases the center of mat board as it goes through the Big Shot Die Cutting Machine* making it easy to fold the cover for your mini album.

  • Cut a 2 1/4″ x 5″ strip of decorative paper to use for the spine and run it through the Xyron Creative Station*.  Adhere to spine.
  • Included in the Honey Dear Premium Stack is a two pages with twelve 3″ x 4″ journaling cards.  Choose one of the journaling cards from the page to embellish the front cover of the notebook.

  • Choose 5 coordinating patterns from the Honey Dear Premium Paper Stack.  Cut the pages using the notebook die.
  • Crease on the center score lines.
  • Using gold and white twine, wrap the twine around the inside creases and around the outside of the book cover to secure the pages.

  • After I had all my pages together, I tied all the piece of twine together in one knot on the spine and tucked in the ends.

A cute little pocket notebook for taking notes or adding pictures.

After making the pocket notebook… 

I decided to make a gift card holder with tag using the Gift Card Folder & Label Die*.

To make the Gift Card Holder:

  • Cut a piece of 6″ x 9″ paper from the Honey Décor Premium Paper Stack.
  • Lay the paper over the Gift Card Folder Die* sandwiched between two cutting plates.
  • Crank the handle of the Sizzix Big Shot Die Cutting Machine*and run the die through the machine.  The die cuts and scores the gift card folder.
  •  Fold along the score lines on the three sides to create a little pocket.
  • Adhere bottom three flaps together using a xyron tape runner*.
  • Cut a 1″ strip of coordinating paper to create a band.  Adhere the band to the holder using the xyron tape runner*.
  • The Gift Card Folder Die* also comes with card insert and tab to use for holding gift cards.

“This is a sponsored post.  As a member of the Xyron Makers Program I have been provided product in exchange for my creative ideas.  The views and opinions are my own.

Creating a Mini Thanksgiving Room

Creating a Mini Thanksgiving Room…

Time to get your rooms ready for the Thanksgiving holiday.

I love making miniature rooms, especially for the Holidays.

I created this special little room for Xyron using the Xyron Creative Station*.

The Xyron Creative Station* is perfect for projects like this.  I wanted complete adhesive coverage on every corner and edge of the paper.  (No wrinkles, no bubbles, easy to use.)

Products Used:                                      ( *affiliate links)

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

To make the Mini Thanksgiving Room…

  • Cut chipboard into 4 pieces:  9″x7 1/2″, 5 3/4″ x 9″ and two 5 3/4″ x 7 1/2″
  • Cut woodgrain paper just 6″ x 9 1/4″ and run it through the Xyron Creative station design side up.   As the paper runs through the machine it adds adhesive under the paper.
  • Adhere the paper to the chipboard.  I like to cut my paper slightly wider than I need so I can trim the edges with a craft knife.
  • Gently sand edges with a extra fine sanding block for the perfect edge.

  • I cut the patterned paper half the size of the other three chipboard pieces and added a 1/2″ strip of  woodgrain paper to cover the seam.  (it looks like chair rail)
  • Using the Creative Station makes quick work of covering the walls.

  • I covered the back of my room with coordinating paper and added small strips of paper on the inside and back corners for added support.  Run those strips through the Xyron Creative Station* as well.

  • I picked up some inexpensive Doll furniture* at Dollar Tree* and painted them with black spraypaint.
  • I gave them a light sanding after they were dry with a sanding block to smooth.

  • I created additional furniture by cutting small pieces of chipboard and adhering them together.  (simple building construction)
  • A couple coats of black paint to finish the job.

  • To Make the tablecloth…Run a piece of lace through the Xyron Creative Station* and adhere the lace to the top of the table.  Trim around the edges of the lace with scissors.
  • I created a small vase with playdoh and painted it with acrylic paint after it was completely dried.  I added craft glue inside my vase and inserted snippets of artificial flowers.
  • I added a platter of turkey on the table. (don’t tell anyone but mine’s really a chicken)

A small little handmade bench for extra seating.

A shelf on the wall with special pewter pieces.

And a cute Turkey Decoration on top the sideboard to make the room more festive.

Happy Thanksgiving!

“This is a sponsored post.  As a member of the Xyron Makers Program I have been provided product in exchange for my creative ideas.  The views and opinions are my own.

If you liked the Thanksgiving Room you’ll like the Christmas Magic Room I made last year.

Splatter Painting

Splatter Painting

When you get an opportunity to look absolutely ridiculous…

have a little fun and make a really big creative mess, well…you just need to take it!

Last year at the Creativation Show, there was a clear acrylic booth set up called

the “Splatter Room”.  As the name suggests, splatter painting is extremely messy.

So…dressed in a hazmat suit and goggles,

I went to town choosing paint and splattering it all over my canvas.

Oh, what a glorious mess! 

It was so much fun and the highlight of my day.

The Shimelle “Box of Crayons” collection from American Crafts was the perfect collection

for my crazy, colorful pictures taken on my Splatter Day.

Last Saturday, National Scrapbooking Day, I spent my day divided between playing with

paper and playing in the dirt.  (I do love a glorious mess.)

The “let’s be friends” card was another project that I made using the “box of crayons” collection

and my Xyron Tape Runner*.

“This is a sponsored post. As a member of the Xyron Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.”

*Disclosure:  This blog uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

American Crafts… Shimelle “box of crayons” collection. 

Spring Quilt Card

It’s been a while since I’ve used rubber stamps to make a card… 

and I’ll admit that it felt really good to sit and watercolor a image again.

Interesting fact…In 1996, my creative journey was started with rubber stamps.

This week the Xyron Design Team has partnered up with Deep Red Rubber Stamps.

I choose the Color Me Spring Quilt cling stamp to use in my project.

Spring Quilt Card products used:      (*affiliate links)

I like using art markers ( and dye ink pads) to water color my stamped image.

I scribble using the marker onto a piece of acetate. (or anything non-porous) and pick up

the ink from the marker with the water-brush and paint the image.

When layering the card…

The Xyron Creative Station* is great for adding adhesive to the back of intricate pieces.

For simple layers I use my Xyron Tape Runner*

I also use the XYRON Adhesive Eraser* to remove any extra adhesive that might show.

Embellish the card using self adhesive flower rhinestones and a sheer ribbon bow.

“This is a sponsored post. As a member of the Xyron Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.”

*Disclosure:  This blog post uses affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!