Trick or Treat Halloween Shaker Card

Trick or Treat Halloween Shaker Card

How to Make a Not So Spooky Halloween Shaker Card.

When it comes to anything Halloween, I like it more “cute” than scary. (big chicken here)

This Not So Spooky Halloween Shaker card uses Dies and Shaker Sprinkles from

The Maker’s Movement’s New Halloween Collection.

Maker's Movement

Disclosure:  This is a sponsored post  for The Maker’s Movement.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own. 

Trick or Treat Halloween Shaker Card

Materials Used:           (*affiliate link)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Trick or Treat Halloween Shaker Card

Directions:

  • I used the Halloween Scene from the Tricks and Treats paper pad for the base of my card. I cut off a 1/2″ off both sides of the paper, making it 5″ x 6″. (The finished card measures 5 1/4″ x 6 1/4″.)
  • Die-cut a large scalloped square frame out of the purple plaid paper from the paper pad.
  • Die-cut a large foam square using the foam cutter die. The foam square will fit under the scalloped square frame.
  • Because I didn’t want the white sides of the foam showing in my shaker element, I used black calligraphy (chisel point) paint marker to color the outside and inside of the foam square. Place the foam square onto the card base. (as shown above)
  • Add “Tricks and Treats” shaker sprinkles into the center of the foam square.
  • Cut a 3 1/4″ x 3 1/4″ piece of clear acetate. Remove the blue protective covering from both sides of the acetate.
  • Remove the top protective coating from the foam square and place the acetate onto the foam.
  • Add adhesive under the purple plaid scalloped square and place it over the acetate lined up with the foam square.

Trick or Treat Halloween Shaker Card

Die-Cutting Tip…

  • When cutting small die-cut pieces, I like to run the paper through the Xyron Create a Sticker Mini*.  After die-cutting, they become little stickers. That makes applying the die-cuts a whole lot easier.

Trick or Treat Halloween Shaker Card

  • Apply the Spider Web die-cut onto the inside corner of the shaker element.
  • Add the words “Happy Halloween” onto the front of the card.

Trick or Treat Halloween Shaker Card

I enjoy making cards with dimension and movement.

I think this is one of the simplest shaker cards I’ve made so far.

If you love making shaker cards, make sure to check out all the dies and cute shaker sprinkles

that are available from The Maker’s Movement.

Toil and Trouble Halloween Shaker Card

Toil & Trouble Halloween Shaker Card.

This is the Halloween Shaker Card I made last year.  You can see how it was made here.

Playing with i-crafter Dies and Embossing Plates

i-crafter tiny home die and water lily embossing plate

I always love getting the chance to play with something new.

For this month’s Designer Craft Connection Blog Hop, I created a couple of projects using

the I-CRAFTER Tiny Home 3D Die Set* and the I-CRAFTER Water Lily Emboss Folder*.  

i-crafter logo

Disclosure:  This is a sponsored post  for i-crafter.  I have been provided product in exchange for my creative ideas.  The view and opinions are my own. 

i-crafter tiny home die

The Tiny Home Die Set* cuts out the cutest little house.

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Tiny Home Banner

I used the I-CRAFTER Tiny Home 3D Die Set* to create a little fall banner to hang

on the corner of my favorite family picture.

Water Lily Cards

I used the I-CRAFTER Water Lily Emboss Folder* to create two cards with two different looks.

The first card was embossed using Watercolor Paper*

I used a Waterbrush* and inks to watercolor directly onto the embossed paper.

The second card I embossed onto blue textured cardstock.

I used DecoArt Metallic Champagne Ice Lustre Wax* and rubbed it

over the embossed areas using my fingertip.

Two simple cards using the same embossing folder!

Designer Craft Connections Pic

To see all the i-crafter projects the other designers have made, click here.

DIY Felt Pumpkin Banner

DIY Felt Pumpkin Banner

How to make a Felt Pumpkin Banner for Fall.

This past weekend in the middle of my Paper Crafting Fall Home Décor project,

I was inspired to sew up this cute felt pumpkin banner. It didn’t hurt that I already

had the sewing machine out (because I had to mend the dog bed, once again).

How to make a Felt Pumpkin Banner

Materials Used:       (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

DIY Felt Pumpkin Banner

I used the Pumpkin Die from The Maker’s Movement to cut out the felt pieces.

The pumpkin die is used for cutting paper and not necessarily to cut fabric and felt.

While the die does not always cut through the felt, it did leave deep impressions.

I used the deep impressions as my guide to cut out the remainder of the shape.

(not recommended on smaller detailed pieces.)

DIY Felt Pumpkin Banner

Directions:

  • I used a pre-cut 9″ x 12″ Antique White Felt for the base of the banner.
  • On the bottom of the Felt, make a small mark at 4 1/2″ the center.  Measure and mark on both sides, starting from the bottom, at 3″.  Draw light lines from the 3″ mark to the center mark.  Cut along the lines to create the bottom point of the banner.
  • Die-cut pumpkin pieces.
  • Place the pumpkin pieces and the letters on the banner to decide on the correct placement.  (make sure to allow space up on top for the trim and the rod pocket)
  • Remove letters and set them aside.
  • Sew around pieces of the pumpkin using a sewing machine.  (if you’re good at hand stitching, that would be even better)
  • Place iron-on embroidered letters onto the banner, cover with a thin cloth, and iron according to directions on the packaging.
  • Sew a piece of decorative trim near the top of the banner.
  • Cut a second piece of Antique White Felt the same size as the first.
  • Sew the top closed, leave a small 1/4″ border.  Create a small rod pocket by sewing another seam at approx. 1 1/4″.
  • Sew around the remainder of the banner.
  • Create a small tassel using a wood bead and thin braided decorative trim.  Poke a small hole on the point of the banner and tie the tassel.  Because my Trim had a slick surface, I added a tiny bit of Fabri-Tac Adhesive* under the bead and at the knot that ties my tassel.


Shop $1 Fall Decor at Dollar Tree!

Paper Crafting Fall Home Décor

Fall Paper Crafted Home Décor

A Simple Fall Paper Crafted Home Décor Project.

It’s so much fun to decorate for Fall with its vibrant and colorful hues.

I’d love Fall even more if it didn’t turn into Winter after it was all over.

For the framed dimensional pumpkin, I decided to use my paper crafting skills

to make a fun and easy Home Décor for Fall.

Maker's Movement

Disclosure:  This is a sponsored post  for The Maker’s Movement.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own. 

Fall Paper Crafted Home Décor

Materials Used:     (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Fall Paper Crafted Home Décor

Directions:

  • Cut two pieces of Double-Sided Adhesive Foam 5″ x 6″ and 4″ x 5″.
  • Cut two pieces of orange plaid paper from the paper crafting paper the same size as the foam.
  • Remove the protective coating from one side of the foam and place the paper onto the adhesive.
  • Place pumpkin die outlines over the foam and die-cut the shape using the Crossover II Die-Cutting Machine*.  You may need to run the die back and forth a couple of times through the machine to make sure all the layers have been cut.
  • Repeat the process with the die-cutting of the stem and leaves.

Fall Paper Crafted Home Decor

  • For the words used on the front of the pumpkin, run a small strip of striped paper through the Xyron Sticker Maker Mini*.
  • Place the word dies onto the paper and die-cut.  (you may want to put a small piece of tape on the dies to keep them in place)

Fall Paper Crafted Home Décor

  • I have a weakness for old frames and I love to pick them up whenever I see a good deal. (I think this one was a quarter.) It now makes the project an Up-Cycled project which makes it extra special.
  • Remove the glass and the backing from the frame and spray with ivory spray paint.

Fall Paper Crafted Home Decor

  • The frame measures 7 1/4″ x 7 1/4″ with a 6″ x 6″ opening.
  • Replace the 90’s picture with a 6″ x 6″ piece of coordinating scrapbook paper. (I placed the glass behind the scrapbook paper to give the project more stability. Also, I will have it if I want to reuse the frame for another project later.)
  • Remove the adhesive from the back of the pumpkin pieces and place it inside the frame.

Paper Crafting Fall Home Décor

Cute, simple, and easy to make. My favorite kind of projects.

Xyron® is your official site for all your crafting needs

Hello Fall Pumpkin Wreath

Hello Fall Pumpkin Wreath

Spruce Up an existing Wreath with StyleTechCraft Vinyl and Fall Dollar Tree finds.

I have a simple boxwood wreath* that I purchased a few years ago that I love.

The best thing about the wreath is I can leave it plain (which I do a lot of the year).

Or, I can change it with the seasons.

Hello Fall Pumpkin Wreath

Hello Fall Pumpkin Wreath

Here’s how I changed my wreath for the Fall Season.

Not counting the wreath, acrylic paint, and vinyl that I had on hand,

I spent a total of $7 at Dollar Tree*  to Change Up the Wreath for Fall.


Everything always $1 at Dollar Tree – Shop Now

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Hello Fall Pumpkin Wreath

I found this cute pumpkin cut-out* at Dollar Tree* and wasn’t sure what I would do with it.

But I knew I better pick it up while I was there. (those things seem to sell out real fast)

It turned out to be the perfect accent for my Hello Fall Pumpkin Wreath.

Supplies Used:                  (*affiliate links)

“This is a sponsored post.  As a member of the StyleTechCraft Design Team I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Hello Fall Pumpkin Wreath

Directions:

Hello Fall SVG Image

Hello Fall SVG Image is available at The Silhouette Design Store.

Hello Fall Pumpkin Wreath-Applying Vinyl with Transfer Tape-Sue's Creative Workshop www.sueeldred.com 3327

  • Place the words onto the pumpkin using transfer tape*.
  • Rub over the words with a vinyl scraper tool to make sure “the words” have transferred.

Hello Fall Pumpkin Wreath

  • To make the Dollar Tree Mini Pumpkin Clips* match the painted wood pumpkin, I decided to paint them using the same acrylic paint colors.
  • Remove the stem and the metal clip from the pumpkin.
  • Because the mini pumpkins have a slick surface, I needed to prime the pumpkins with multi-media paint first.
  • For ease of painting, place a bamboo skewer* in the mini pumpkin. Paint with multi-media paint. After the paint has dried, paint with the same colors used on the wood pumpkin.
  • Reinsert the stem. Glue the clip in place using the glue gun*.

Hello Fall Pumpkin Wreath

Hello Fall Pumpkin Wreath

Hello Fall Pumpkin Wreath

  • Create a simple bow using Ribbon and Twine and glue it onto the pumpkin.

Hello Fall Pumpkin Wreath

  • Tie the finished pumpkin to the top of the wreath with twine.
  • Clip-on Mini Pumpkin Clips and insert fall picks.

Fall Crafting with Vinyl

Fall Crafting with Vinyl…

If you don’t need a new wreath, the finished pumpkin would also look great in a Fall Display.

Fall Crafting with Vinyl

Hello Fall Mini Candle Cup

I found this cute little ceramic cup on a recent trip to Hobby Lobby.

As adorable as it was, it looks even better with StyleTechCraft Vinyl on it.

In my opinion, adding a little vinyl makes most things a little better.

Fall Crafting with Vinyl

At first, I thought about saving the mini cup for my grandsons. 

I knew they’d get a kick out of the tiny cup.

Who wouldn’t love a mini cup of hot chocolate with marshmallows?

Then I figured I’d spend too much time constantly refilling it.

So I thought again. (sometimes, you got to think these things through)

Buffalo Plaid Wood Slice Pumpkin

How to make a Buffalo Plaid Wood Slice Pumpkin, another Easy Pumpkin Project.  

    

Don’t Miss a Thing…Make Sure to Follow me!

   

Check out what’s new at acherryontop.com!

DIY Vintage Pumpkin Truck

DIY Vintage Pumpkin Truck

For the Love of Old Trucks…

When I first shared Eileen’s New Vintage Truck in June, I said, “Can you imagine it as an old

rusty pickup filled with miniature pumpkins?” Well, here it is.

Except it’s not rusty looking and old…

instead I tricked it out with a shiny new paint job.  (so to speak)

Vintage Pumpkin Truck

How to Create a Vintage Pumpkin Truck with Eileen Hull Vintage Truck Die* from Sizzix.

  • Instead of painting the pieces of the truck, I used adhesive vinyl on the truck parts before die-cutting them.
  • Cut a piece of mat board slightly larger than the shape you are going to die-cut.
  • Apply vinyl on both sides of the mat board and die-cut the shape using the Vintage Truck Die* and the Big Shot Die-Cutting Machine*.

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your sup

Eileen Hull's Vintage Truck Die

Materials Used:       (*affiliate links)

Vintage Truck Parts and Pieces

  • When all the pieces have been die-cut, go around the edges with a black calligraphy paint marker. Adding paint to the edges will cover up the white core of the mat board and give the pieces more detail.
  • Adhere the pieces of the truck together using Rapid Fuse Adhesive*.

Vintage Truck

Adapting the truck to carry a wider load.

  • I wanted the truck to have a wider body, to carry a larger load.  
  • After die-cutting the bottom piece for the truck bed, cut the piece in half.  
  • I cut a second piece of mat board 2″ x 6″.  (or you could even cut it a little wider than that)
  • Glue the scored die-cut pieces to the bottom of the larger mat board using Rapid Fuse Adhesive*.

Vintage Pumpkin Truck

Vintage Pumpkin Truck

A Fun Fall Décor Piece.

Book Marks for Book Lovers and Readers

Bookmarks for Book Lovers and Readers

Creating Bookmarks for Book Lovers and Readers…

Besides crafting, reading is one of my favorite hobbies.

Sitting and reading is a luxury for me.  Never enough time.

Bookmarks for Book Lovers and Readers

Just one more page…

I love getting lost in a good book. My problem is once I start reading,

I can’t seem to put the book down until I finish reading it.

Forget about work, dinner, or dishes.

Bookmarks for Book Lovers and Readers

Combining my two hobbies…

I created bookmarks using the New Bookmark Die Set from The Maker’s Movement.

 

Disclosure:  This is a sponsored post for The Maker’s Movement.  I have been provided product and compensation in exchange for my creative ideas.  The view and opinions are my own. 

Bookmarks for Book Lovers and Readers

Materials Used:      (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Bookmarks for Book Lovers and Readers

Directions:

  • Cut out the layers of the bookmark using the bookmark die. 
  • Adhere them together using a tape runner*.
  • Using the Xyron Creative Station* with a double-sided Laminating cartridge, place the bookmark base in the machine.  Crank the handle to run it through the machine. The Creative Station adds clear laminating onto both sides of the bookmark.

Bookmarks for Book Lovers and Readers

  • Trim the bookmark with scissors leaving a 1/8″ border of lamination.
  • Reopen the top slot of the book mark with scissors or a craft knife.

Bookmarks for Book Lovers and Readers

To make the letters on the blue bookmark… place a piece of scrapbook paper through the Xyron Creative Station* with a permanent adhesive cartridge* to add adhesive to the back of the scrapbook paper. Once the letters were die-cut, they became little letter stickers.

Bookmarks for Book Lovers and Readers

  • Place the vinyl onto the bookmark, and rub over the transfer paper to make sure the vinyl sticks to the lamination.  (You can use a vinyl scraper tool.)

Bookmarks for Book Lovers and Readers

Add ribbon and trim to create the perfect bookmark for your favorite book lover.

DIY Holiday Planner

DIY Holiday Planner

Creating a Holiday Planner…

It’s never too early to start thinking about the Holidays.

So…when Xyron asked me to do a Christmas in July project using the Xyron Holiday Bundle,

of course, I said YES!

To be honest, my first thought was to run over to my local scrapbook store

and buy something new to use in my project.

Christmas is my weakness, and I have so much leftover from previous years.

I decided to “Scrap my Stash” instead. In the end, I used paper from 3-4 different collections.

(I’m so proud of my self-control.)

My Holiday Planner measures 6″ x 8″. 

It is big enough to write in but small enough to grab and go.
Xyron® is your official site for all your crafting needs
“This post is sponsored for Xyron.  I have been provided product and compensation in exchange for my creative ideas.  The views and opinions are my own.

Creating a Holiday Planner

Materials Used:

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Xyron Creative Station

DIY Planner Details:

  • Cut two 6″ x 8″ pieces of decorative paper for the front cover and two 6″ x 8″ pieces for the inside front and back covers.
  • Lay the paper into the Xyron 9″ Creative Station* design side up. Crank the handle of the Creative Station* to run it through the machine. As it goes through the machine it adds a complete layer of adhesive to the back of the paper. No electricity needed, easy to use.
  • Peel the decorative paper from the protective liner and place it onto a 6″ x 8″ piece of chipboard. Cover the front and back sides of the chipboard.
  • I love using the Xyron 9″ Creative Station* when I make albums.  I get complete coverage and everything lays smooth, no wrinkles.
  • I like to use a craft mat and craft knife to trim away any excess paper.
  • A sanding block is great for smoothing out the edges of the covered chipboard.

Xyron Disposable Sticker Maker

  • Cut decorative strips to add the front and back of the planner.  If you’ve never made a planner/album like this, you’ll want to give particular thought to the placement of the strips on the back cover to make sure they line up with the front of the planner.
  • I used coordinating decorative scrapbook paper to create a frame for the front of my planner using the frame die from The Maker’s Movement.

DIY Holiday Planner-Xyron Disposable Sticker Maker-Sue's Creative Workshop www.sueeldred.com 1081DIY Holiday Planner-Xyron Disposable Sticker Maker-Sue's Creative Workshop www.sueeldred.com 1101

DIY Holiday Planner Pages

  • I created several different types of pages using a word program for the inside of the planner.
  • As you can see, it doesn’t have to be anything fancy.
  • Once you get your cover finished and your inside pages created, you’ll want to bind it all together using a binding machine.  I used an old Bind it All Machine.  You can also use The Cinch Book Binding Machine*.

Holiday Planner-Calendar Pages

November and December are the crucial days when planning the Holidays. 

I printed out two calendar pages from SaturdayGift.com and sized them to fit in my planner.

On the inside of the front cover, I created a pocket for lists and coupons.

DIY Holiday Planner

Christmas Gift List

I am that person.  I write down everything I buy for Christmas.

If you want to know what I bought you five years ago for Christmas, ask me.

DIY Holiday Planner

Christmas Card List

Do you still send Christmas Cards?

I love getting and sending Christmas Cards over the Holidays.  (sometimes I even make them)

I don’t get as many or send as many as I used to, but I love hanging them on display.

DIY Holiday Planner-Merry & Bright-Sue's Creative Workshop www.sueeldred.com 1515-2

A great way to be prepared for the Holiday Cookie Exchange. 

Creating pockets are a great way to keep organized and the perfect place for

blank Holiday recipe cards.

DIY Holiday Planner

Favorite Family Recipes…

I have several family favorite recipes that I make every year.

Several years ago, I typed them all up and saved them on my computer.

It was easy to reprint them and add them to this year’s Holiday Planner.

DIY Holiday Planner-Notes & Receipt Holder-Sue's Creative Workshop www.sueeldred.com 1549

Notes and Stuff…

These pages are for writing down special memories, tips of things that worked that’ll you’ll want

to remember for the next holiday get-together, or the other room mom’s phone number.

There’s so much that we need to remember during the holidays.

And don’t forget to save those receipts for easy returns.

I added a thick buffalo plaid zipper bag in my planner to hold those receipts.

DIY Holiday Planner

Jingle All The Way… 

Create another pocket in the back to tuck in pictures and invitations.

I can never have too many pockets to help keep me organized.

The nice thing about Christmas in July is that by the time the Holidays do arrive,

I’ll be almost ready.

Eileen Hull’s New Vintage Truck Die

Vintage Flower Truck

I’m excited to share with you Eileen Hull’s New Vintage Truck Die*

that is part of the New Chapter 3 Release Dies from Sizzix.

It is one of the cutest dies for so many different Holidays.

Can you imagine it as an old rusty pickup filled with miniature pumpkins? 

And of course, think of all the cute things you can do for Christmas.

Vintage Flower Truck-Sue's Creative Workshop www.sueeldred.com 491

Here’s What I used:    (*affiliate link)

Tips:

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

Cardinal on Wreath Ornament

Another project made using the New Chapter 3 Dies is this Simple Holiday Ornament

using the New Ornament Box Die*  and the Wreath and Snowflake Thinlets Die Set*.

There’s a limited supply of these dies currently, so make sure to get yours today.

Eileen Hull/ Sizzix Chapter 3 Dies

Eileen’s Teams have joined together to give you even more ideas on these creative New Dies.

LET’S GET GOING ON OUR RELEASE PARTY BLOG HOP…

Click on the next link below to continue on your way. Comment on each designer’s blog post to be eligible to win a prize!  (see Eileen’s Blog for details)

Eileen Hull Designs
Julia Aston
Madeline Arendt
Jennie Atkinson
Sue Eldred
Maggi Harding
Lisa Hoel
Elizabeth Robinson
Tonya Trantham
Pam Bray
Jenny Marples

Using Stazon Ink on Acrylic

Using Stazon Ink on Acrylic

How to Create a Multi-colored Acrylic Tag using StazOn Ink.

I tried this technique last year and have been wanting to recreate another project

so that I could share the process with you all.  (I’m not sure what took me so long.)

And with so many different acrylic sizes and shapes available, the ideas are endless.

Every Moment Counts Acrylic Tag

StazOn Ink is a permanent ink that is archival-quality.

It dries very quickly and can be used on porous (cardstock) and non-porous (glossy paper, vinyl, glass, acrylic) surfaces.

Using Stazon Ink on Acrylic

Materials Used:     (*affiliate links)

*Disclosure:  This blog uses ads and affiliate links.  If you choose to make a purchase using one of the links, I receive a small commission (at no additional cost to you) that helps offset the costs of maintaining this blog.  Thanks for your support!

How to use Stazon Ink on Acrylic

Directions:

  • Most acrylic pieces usually come with a thin protective covering on both sides of the acrylic.  Remove protective covering off only one of the sides.  You will be working on one side at a time so only remove the protective cover off one side.  If your acrylic doesn’t have a protective covering you’ll need to make sure to protect the other side.
  • Give the acrylic piece a quick once over with a sanding block.  This helps ensure that everything adheres.
  • Rub the StazOn ink pad directly onto the acrylic to add the first color.

How to use Stazon Ink on Acrylic

  • Continue adding additional colors to the tag.  
  • You can experiment with different swipes and swirls to find the pattern you like.

Using Stazon Ink on Acrylic

  • Paint one or two coats of light multi-surface acrylic paint over the ink.  The multi-surface paint is perfect for surfaces like acrylic.  The paint makes the colors of the ink pop and not as translucent.

Using Stazon Ink on Acrylic

  • For added protection and a scratch-resistant tag, I sprayed the tag with a matte acrylic sealer. (the color won’t be coming off my tag)
  • After everything has fully dried, turn the tag over and remove the second piece of protective covering from the acrylic.

Using Stazon Ink on Acrylic

For the other side of the tag.  

  • I created a saying using an SVG file from the Silhouette Store and cut it out of white glossy adhesive craft vinyl using my Silhouette Electronic Die-Cutting Machine*.
  • I used the vinyl tools to remove the excess vinyl in and around the letters.
  • Cut a piece of Clear Transfer Tape* slightly larger than the word.
  • Using the vinyl scraper tool, gently rub over the letters to make sure they have transferred.
  • Lift the word off the white backer paper.

Apply Craft Vinyl to Acrylic Tag

  • Center and position the words over your acrylic tag and gently rub over the transfer paper with the vinyl scraper tool.
  • Carefully remove transfer paper from the acrylic tag.
  • Add ribbon or twine through the hole of the tag.

Makes a great inspirational bag tag.

Every Moment Counts Acrylic Tag

Interested in the Products Used on the Every Moment Counts Tag?

Click on Images below for Amazon Ordering.

Amazon Audible Promo    Amazon Audible Free Trial*